From 0c74892e9080e17db637a31d421f920862baaaef Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 2 Jul 2022 06:58:40 -0700 Subject: [Keyboard] Update Charybdis code for Extended Mouse reports (#17435) --- keyboards/bastardkb/charybdis/readme.md | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'keyboards/bastardkb/charybdis/readme.md') diff --git a/keyboards/bastardkb/charybdis/readme.md b/keyboards/bastardkb/charybdis/readme.md index 461f33117c..d786abf36e 100644 --- a/keyboards/bastardkb/charybdis/readme.md +++ b/keyboards/bastardkb/charybdis/readme.md @@ -176,3 +176,23 @@ To disable the custom keycodes, and reduce binary size, simply add a definition ```c #define NO_CHARYBDIS_KEYCODES ``` + +### Configuration Syncing + +If you want/need to enable syncing of the charybdis config, such as to read the sniping or drag scroll modes on the other half (such as for displaying the status via rgb matrix, or added on screens, or what not), you can enabled this. To do so, add this to your `config.h`: + +```c +#define CHARYBDIS_CONFIG_SYNC +``` + +Note that you will need to reflash both sides when enabling this. + +### Enable Large Mouse Reports + +By default, the X and Y motion for the pointing device/mouse reports is -127 to 127. You can definitely hit the limit for that with the sensors. You can enable support for -32767 to 32767 by adding this to your `config.h`: + +```c +#define MOUSE_EXTENDED_REPORT +``` + +Note that you will need to reflash both sides when enabling this. -- cgit v1.2.3 From 50a12c06b9c3dd4bda1fbe6dac1f692fade2d4d1 Mon Sep 17 00:00:00 2001 From: Charly Delay <0xcharly@users.noreply.github.com> Date: Mon, 25 Jul 2022 18:11:28 +0900 Subject: [keyboard] bastardkb: restructure folder hierarchy (#16778) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus Upcoming support for the following (adapter, mcu) pairs will be submitted in follow-up PRs: - `v2/elitec` - `v2/stemcell` - `blackpill` This PR contains the following changes: - Move previous implementation to an inner `v1/elitec` folder - Move keyboard USB IDs and strings to data driven - Update headers to update maintainers list - Run `qmk format-c` * bastardkb/charybdis: remove broken acceleration implementation * bastardkb/charybdis: fix debug output * bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair * bastardkb: add Blackpill support * bastardkb/charybdis/3x5: add `bstiq` keymap * bastardkb/charybdis: add fake LEDs to the configuration For the Charybdis 3x5 (respectively 4x6), the LED config now simulates 36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to prevent confusion when testing LEDs during assembly when handedness is not set correctly. Those fake LEDs are bound to the physical bottom-left corner. * bastardkbk/charybdis/readme.md: update build commands Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield. * bastardkb/charybdis: fix Via keymap with blackpill * bastardkb/charybdis: add 3x6 configuration * bastardkb/charybdis: remove unnecessary files * bastardkb/charybdis: remove obsolete code * bastardkb/charybdis/3x6: add Via keymap * bastardkb: add support for Splinky (RP2040) board * bastardkb: initial configuration for the Splinky (SPI not working yet) * bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball * bastardkb/charybdis/3x6: add splinky config * bastardkb/*/v2/splinky: update drivers to `vendor` * bastardkb/dilemma: add new board * bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps * bastardkb/dilemma: add `bstiq` keymap * bastardkb: specify blackpill boards * bastardkb/charybdis: fix blackpill-specific define syntax * bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options * bastardkb: fix `QK_BOOT` keycodes * bastardkb/dilemma: fix mouse direction on X axis * bastardkb/charybdis/3x6: adjust CS * bastardkb/dilemma: adjust trackpad configuration * charybdis: fix `PWM33XX_CS_PIN` defines This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613. * bastardkb: remove Vial mentions from `bstiq` keymaps * Cleanup unnecessary comments Co-authored-by: Nathan Co-authored-by: Charly Delay <0xcharly@codesink.dev> --- keyboards/bastardkb/charybdis/readme.md | 49 ++++++++++++--------------------- 1 file changed, 17 insertions(+), 32 deletions(-) (limited to 'keyboards/bastardkb/charybdis/readme.md') diff --git a/keyboards/bastardkb/charybdis/readme.md b/keyboards/bastardkb/charybdis/readme.md index d786abf36e..c112c1150e 100644 --- a/keyboards/bastardkb/charybdis/readme.md +++ b/keyboards/bastardkb/charybdis/readme.md @@ -18,33 +18,32 @@ Check out the [keyboard build guides](https://docs.bastardkb.com) for the Charyb ## Building the firmware -### Charybdis (4x6) - -The `default` keymap is inspired from the original [Dactyl Manuform](../../handwired/dactyl_manuform) layout. +**You must specify the shield version when compiling/flashing the firmware.** +The template is: ```shell -qmk compile -kb bastardkb/charybdis/4x6 -km default +qmk compile -kb bastardkb/charybdis/{LAYOUT}/{VERSION}/elitec -km {KEYMAP} ``` -Check out the `via` layout if you're looking for VIA support: +See below for populated commands per layout -```shell -qmk compile -kb bastardkb/charybdis/4x6 -km via -``` +The `default` keymap is inspired from the original [Dactyl Manuform](../../handwired/dactyl_manuform) layout. -### Charybdis (3x5) +Check out the `via` layout if you're looking for VIA support. -The `default` keymap is inspired from the original [Dactyl Manuform](../../handwired/dactyl_manuform) layout. +### Charybdis (4x6) -```shell -qmk compile -kb bastardkb/charybdis/3x5 -km default -``` +| Shield Version | default | via | +|----------------|-----------------------------------------------------------------|-----------------------------------------------------------------| +| v1 | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km via` | +| v2 | `qmk compile -kb bastardkb/charybdis/4x6/v2/elitec -km default` | `qmk compile -kb bastardkb/charybdis/4x6/v2/elitec -km via` | -Check out the `via` layout if you're looking for VIA support: +### Charybdis (3x5) -```shell -qmk compile -kb bastardkb/charybdis/3x5 -km via -``` +| Shield Version | default | via | +|----------------|-----------------------------------------------------------------|-----------------------------------------------------------------| +| v1 | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km via` | +| v2 | `qmk compile -kb bastardkb/charybdis/3x5/v2/elitec -km default` | `qmk compile -kb bastardkb/charybdis/3x5/v2/elitec -km via` | ## Customizing the firmware @@ -73,7 +72,7 @@ Drag-scroll enables scrolling with the trackball. When drag-scroll is enabled, t Call `charybdis_set_pointer_dragscroll_enabled(bool enable)` to enable/disable drag-scroll. -`charybdis_get_pointer_dragscroll_enabled()` returns whether sniping mode is currently enabled. +`charybdis_get_pointer_dragscroll_enabled()` returns whether drag-scroll mode is currently enabled. To invert the horizontal scrolling direction, define `CHARYBDIS_DRAGSCROLL_REVERSE_X`: @@ -114,20 +113,6 @@ This behavior can be further customized with the following defines: #define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100 ``` -### Acceleration - -By default, the pointer's movements are linear. To enable acceleration, add the following define: - -```c -#define CHARYBDIS_POINTER_ACCELERATION_ENABLE -``` - -The acceleration factor can be further tune _via_ the `CHARYBDIS_POINTER_ACCELERATION_FACTOR`: - -```c -#define CHARYBDIS_POINTER_ACCELERATION_FACTOR 24 -``` - ### Custom keycodes The Charybdis firmware defines a number of keycodes to leverage its features, namely: -- cgit v1.2.3