From 3c58f989295e17d03b66db9a154e02cde7336ece Mon Sep 17 00:00:00 2001 From: Stefan Kerkmann Date: Thu, 14 Jul 2022 11:50:00 +0200 Subject: [Core] PMW33XX drivers overhaul (#17613) * PMW33XX drivers overhaul This combines the PMW3389 and PM3360 drivers as they only differ in the firmware blobs and CPI get and set functions. The following changes have been made: * PMW3389 now gets the same multi-sensor feature that is already available on the PMW3360. * Introduced a shared pmw33xx_report_t struct is now directly readable via SPI transactions instead of individual byte-sized reads, saving multiple copies and bitshift operations. * pmw33(89/60)_get_report functions had unreachable branches in their motion detection logic these have been simplied as much as possible. * The fast firmware upload option has been removed as this becomes obsolete by the newly introduced polled waiting functions for ChibiOS polled waiting * PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options have been removed as they don't need to be configurable. * All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix to reduce code duplication and make the defines interchangeable * Adjust keyboards to PMW33XX naming scheme --- keyboards/bastardkb/charybdis/3x5/config.h | 4 ++-- keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h | 6 ++---- 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'keyboards/bastardkb/charybdis/3x5') diff --git a/keyboards/bastardkb/charybdis/3x5/config.h b/keyboards/bastardkb/charybdis/3x5/config.h index 89b896bc35..b12603fade 100644 --- a/keyboards/bastardkb/charybdis/3x5/config.h +++ b/keyboards/bastardkb/charybdis/3x5/config.h @@ -58,8 +58,8 @@ /* Set 0 if debouncing isn't needed. */ #define DEBOUNCE 5 -/* PMW3360 settings. */ -#define PMW3360_CS_PIN B0 +/* PMW33XX settings. */ +#define PMW33XX_CS_PIN B0 // Trackball angle adjustment. #define ROTATIONAL_TRANSFORM_ANGLE -25 diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h index 0f08aee9ef..39204a3667 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h @@ -98,10 +98,8 @@ along with this program. If not, see . // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 /* pmw3360 config */ -#undef PMW3360_CS_PIN -#define PMW3360_CS_PIN B0 -#define PMW3360_SPI_MODE 3 -#define PMW3360_SPI_DIVISOR 64 +#undef PMW33XX_CS_PIN +#define PMW33XX_CS_PIN B0 #define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200 #define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400 -- cgit v1.2.3 From 50a12c06b9c3dd4bda1fbe6dac1f692fade2d4d1 Mon Sep 17 00:00:00 2001 From: Charly Delay <0xcharly@users.noreply.github.com> Date: Mon, 25 Jul 2022 18:11:28 +0900 Subject: [keyboard] bastardkb: restructure folder hierarchy (#16778) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus Upcoming support for the following (adapter, mcu) pairs will be submitted in follow-up PRs: - `v2/elitec` - `v2/stemcell` - `blackpill` This PR contains the following changes: - Move previous implementation to an inner `v1/elitec` folder - Move keyboard USB IDs and strings to data driven - Update headers to update maintainers list - Run `qmk format-c` * bastardkb/charybdis: remove broken acceleration implementation * bastardkb/charybdis: fix debug output * bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair * bastardkb: add Blackpill support * bastardkb/charybdis/3x5: add `bstiq` keymap * bastardkb/charybdis: add fake LEDs to the configuration For the Charybdis 3x5 (respectively 4x6), the LED config now simulates 36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to prevent confusion when testing LEDs during assembly when handedness is not set correctly. Those fake LEDs are bound to the physical bottom-left corner. * bastardkbk/charybdis/readme.md: update build commands Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield. * bastardkb/charybdis: fix Via keymap with blackpill * bastardkb/charybdis: add 3x6 configuration * bastardkb/charybdis: remove unnecessary files * bastardkb/charybdis: remove obsolete code * bastardkb/charybdis/3x6: add Via keymap * bastardkb: add support for Splinky (RP2040) board * bastardkb: initial configuration for the Splinky (SPI not working yet) * bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball * bastardkb/charybdis/3x6: add splinky config * bastardkb/*/v2/splinky: update drivers to `vendor` * bastardkb/dilemma: add new board * bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps * bastardkb/dilemma: add `bstiq` keymap * bastardkb: specify blackpill boards * bastardkb/charybdis: fix blackpill-specific define syntax * bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options * bastardkb: fix `QK_BOOT` keycodes * bastardkb/dilemma: fix mouse direction on X axis * bastardkb/charybdis/3x6: adjust CS * bastardkb/dilemma: adjust trackpad configuration * charybdis: fix `PWM33XX_CS_PIN` defines This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613. * bastardkb: remove Vial mentions from `bstiq` keymaps * Cleanup unnecessary comments Co-authored-by: Nathan Co-authored-by: Charly Delay <0xcharly@codesink.dev> --- keyboards/bastardkb/charybdis/3x5/3x5.c | 8 +- .../bastardkb/charybdis/3x5/blackpill/config.h | 62 ++++++ .../bastardkb/charybdis/3x5/blackpill/halconf.h | 29 +++ .../bastardkb/charybdis/3x5/blackpill/info.json | 6 + .../bastardkb/charybdis/3x5/blackpill/mcuconf.h | 61 ++++++ .../bastardkb/charybdis/3x5/blackpill/readme.md | 3 + .../bastardkb/charybdis/3x5/blackpill/rules.mk | 41 ++++ keyboards/bastardkb/charybdis/3x5/config.h | 44 +--- keyboards/bastardkb/charybdis/3x5/info.json | 7 +- .../charybdis/3x5/keymaps/bstiq/README.md | 3 + .../bastardkb/charybdis/3x5/keymaps/bstiq/config.h | 166 +++++++++++++++ .../bastardkb/charybdis/3x5/keymaps/bstiq/keymap.c | 224 +++++++++++++++++++++ .../bastardkb/charybdis/3x5/keymaps/bstiq/rules.mk | 10 + .../charybdis/3x5/keymaps/default/keymap.c | 4 +- .../bastardkb/charybdis/3x5/keymaps/via/config.h | 13 +- .../bastardkb/charybdis/3x5/keymaps/via/keymap.c | 42 ++-- keyboards/bastardkb/charybdis/3x5/rules.mk | 38 ---- .../bastardkb/charybdis/3x5/v1/elitec/config.h | 42 ++++ .../bastardkb/charybdis/3x5/v1/elitec/info.json | 6 + .../bastardkb/charybdis/3x5/v1/elitec/rules.mk | 37 ++++ .../bastardkb/charybdis/3x5/v2/elitec/config.h | 36 ++++ .../bastardkb/charybdis/3x5/v2/elitec/info.json | 6 + .../bastardkb/charybdis/3x5/v2/elitec/rules.mk | 37 ++++ .../bastardkb/charybdis/3x5/v2/splinky/config.h | 50 +++++ .../bastardkb/charybdis/3x5/v2/splinky/info.json | 6 + .../bastardkb/charybdis/3x5/v2/splinky/mcuconf.h | 23 +++ .../bastardkb/charybdis/3x5/v2/splinky/rules.mk | 37 ++++ 27 files changed, 930 insertions(+), 111 deletions(-) create mode 100644 keyboards/bastardkb/charybdis/3x5/blackpill/config.h create mode 100644 keyboards/bastardkb/charybdis/3x5/blackpill/halconf.h create mode 100644 keyboards/bastardkb/charybdis/3x5/blackpill/info.json create mode 100644 keyboards/bastardkb/charybdis/3x5/blackpill/mcuconf.h create mode 100644 keyboards/bastardkb/charybdis/3x5/blackpill/readme.md create mode 100644 keyboards/bastardkb/charybdis/3x5/blackpill/rules.mk create mode 100644 keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/README.md create mode 100644 keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/config.h create mode 100644 keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/keymap.c create mode 100644 keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/rules.mk delete mode 100644 keyboards/bastardkb/charybdis/3x5/rules.mk create mode 100644 keyboards/bastardkb/charybdis/3x5/v1/elitec/config.h create mode 100644 keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json create mode 100644 keyboards/bastardkb/charybdis/3x5/v1/elitec/rules.mk create mode 100644 keyboards/bastardkb/charybdis/3x5/v2/elitec/config.h create mode 100644 keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json create mode 100644 keyboards/bastardkb/charybdis/3x5/v2/elitec/rules.mk create mode 100644 keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h create mode 100644 keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json create mode 100644 keyboards/bastardkb/charybdis/3x5/v2/splinky/mcuconf.h create mode 100644 keyboards/bastardkb/charybdis/3x5/v2/splinky/rules.mk (limited to 'keyboards/bastardkb/charybdis/3x5') diff --git a/keyboards/bastardkb/charybdis/3x5/3x5.c b/keyboards/bastardkb/charybdis/3x5/3x5.c index d896cf6923..7b10d322cd 100644 --- a/keyboards/bastardkb/charybdis/3x5/3x5.c +++ b/keyboards/bastardkb/charybdis/3x5/3x5.c @@ -33,6 +33,10 @@ * ╰────────────────────╯ ╰────────────────────╯ * 15 16 17 33 34 XX * ╰────────────╯ ╰────────────╯ + * + * Note: the LED config simulates 36 LEDs instead of the actual 35 to prevent + * confusion when testing LEDs during assembly when handedness is not set + * correctly. Those fake LEDs are bound to the physical top-left corner. */ led_config_t g_led_config = { { /* Key Matrix to LED index. */ @@ -61,7 +65,7 @@ led_config_t g_led_config = { { /* index=24 */ { 188, 42 }, { 188, 21 }, { 188, 0 }, /* index=27 */ { 170, 0 }, { 170, 21 }, { 170, 42 }, /* index=30 */ { 152, 0 }, { 152, 21 }, { 152, 42 }, - /* index=33 */ { 152, 64 }, { 134, 64 }, + /* index=33 */ { 134, 64 }, { 152, 64 }, { 0, 0 }, }, { /* LED index to flag. */ // Left split. @@ -77,7 +81,7 @@ led_config_t g_led_config = { { /* index=24 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, /* index=27 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, /* index=30 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, - /* index=33 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // Thumb cluster + /* index=33 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // Thumb cluster } }; #endif // clang-format on diff --git a/keyboards/bastardkb/charybdis/3x5/blackpill/config.h b/keyboards/bastardkb/charybdis/3x5/blackpill/config.h new file mode 100644 index 0000000000..ddd5e83318 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/blackpill/config.h @@ -0,0 +1,62 @@ +/* + * Copyright 2020 Christopher Courtney (@drashna) + * Copyright 2021 Stefan Kerkmann (@KarlK90) + * Copyright 2021 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Publicw License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { A2, B8, A8, B9 } +#define MATRIX_COL_PINS \ + { B1, B10, B3, B4, B5 } + +/* Handedness. */ +#define SPLIT_HAND_PIN A3 // High -> left, Low -> right. + +/* RGB settings. */ +#define RGB_DI_PIN A1 +#define WS2812_PWM_DRIVER PWMD2 +#define WS2812_PWM_CHANNEL 2 +#define WS2812_PWM_PAL_MODE 1 +#define WS2812_EXTERNAL_PULLUP +#define WS2812_DMA_STREAM STM32_DMA1_STREAM1 +#define WS2812_DMA_CHANNEL 3 +#define WS2812_PWM_TARGET_PERIOD 800000 + +/* Serial configuration for split keyboard. */ +#define SERIAL_USART_TX_PIN A9 + +/* CRC. */ +#define CRC8_USE_TABLE +#define CRC8_OPTIMIZE_SPEED + +/* SPI config for EEPROM and pmw3360 sensor. */ +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN A5 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN A7 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN A6 +#define SPI_MISO_PAL_MODE 5 + +/* EEPROM config. */ +#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 + +/* PMW3360 settings. */ +#define PMW33XX_CS_PIN B14 +#define PMW33XX_CS_DIVISOR 64 diff --git a/keyboards/bastardkb/charybdis/3x5/blackpill/halconf.h b/keyboards/bastardkb/charybdis/3x5/blackpill/halconf.h new file mode 100644 index 0000000000..a89dff0cd3 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/blackpill/halconf.h @@ -0,0 +1,29 @@ +/* + * Copyright 2020 Nick Brassel (tzarc) + * Copyright 2021 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define HAL_USE_PWM TRUE +#define HAL_USE_SERIAL TRUE +//#define HAL_USE_I2C TRUE +#define HAL_USE_SPI TRUE +#define SPI_USE_WAIT TRUE +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +//#define HAL_USE_GPT TRUE + +#include_next "halconf.h" diff --git a/keyboards/bastardkb/charybdis/3x5/blackpill/info.json b/keyboards/bastardkb/charybdis/3x5/blackpill/info.json new file mode 100644 index 0000000000..1e347df9b2 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/blackpill/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Charybdis Nano (3x5) Blackpill", + "usb": { + "device_version": "1.0.0", + }, +} diff --git a/keyboards/bastardkb/charybdis/3x5/blackpill/mcuconf.h b/keyboards/bastardkb/charybdis/3x5/blackpill/mcuconf.h new file mode 100644 index 0000000000..1615d1bf46 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/blackpill/mcuconf.h @@ -0,0 +1,61 @@ +/* + * Copyright 2020 Nick Brassel (tzarc) + * Copyright 2021 Stefan Kerkmann (@KarlK90) + * Copyright 2021 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include_next "mcuconf.h" + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_I2C_I2C1_RX_DMA_STREAM +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#undef STM32_I2C_I2C1_TX_DMA_STREAM +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) + +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE + +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE + +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE + +#undef STM32_SPI_SPI1_RX_DMA_STREAM +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#undef STM32_SPI_SPI1_TX_DMA_STREAM +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE + +// #undef STM32_SERIAL_USE_USART2 +// #define STM32_SERIAL_USE_USART2 TRUE + +// #undef STM32_UART_USART2_RX_DMA_STREAM +// #define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +// #undef STM32_UART_USART2_TX_DMA_STREAM +// #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE + +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 5 diff --git a/keyboards/bastardkb/charybdis/3x5/blackpill/readme.md b/keyboards/bastardkb/charybdis/3x5/blackpill/readme.md new file mode 100644 index 0000000000..7ef08798b8 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/blackpill/readme.md @@ -0,0 +1,3 @@ +# Charybdis Nano (3x5) BlackPill + +An ergonomic keyboard with integrated trackball, with BlackPill (STM32F411) mod. diff --git a/keyboards/bastardkb/charybdis/3x5/blackpill/rules.mk b/keyboards/bastardkb/charybdis/3x5/blackpill/rules.mk new file mode 100644 index 0000000000..0f732c2cbd --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/blackpill/rules.mk @@ -0,0 +1,41 @@ +# MCU name +MCU = STM32F411 +BOARD = BLACKPILL_STM32_F411 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality +RGB_MATRIX_DRIVER = WS2812 + +# Charybdis nano is a split 3x5 keyboard with a maximum of 3 thumb keys (2 on +# the trackball side). +SPLIT_KEYBOARD = yes +LAYOUTS = split_3x5_3 # Support community layout, in particular Manna-Harbour's Miryoku layout + +POINTING_DEVICE_ENABLE = yes # Enable trackball +POINTING_DEVICE_DRIVER = pmw3360 +MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint +KEYBOARD_SHARED_EP = yes + +EEPROM_DRIVER = spi +WS2812_DRIVER = pwm +SERIAL_DRIVER = usart + +DEBOUNCE_TYPE = asym_eager_defer_pk diff --git a/keyboards/bastardkb/charybdis/3x5/config.h b/keyboards/bastardkb/charybdis/3x5/config.h index b12603fade..57634258be 100644 --- a/keyboards/bastardkb/charybdis/3x5/config.h +++ b/keyboards/bastardkb/charybdis/3x5/config.h @@ -18,58 +18,24 @@ #pragma once -#define VENDOR_ID 0xA8F8 -#define PRODUCT_ID 0x1832 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Bastard Keyboards -#define PRODUCT Charybdis Nano +#include "config_common.h" /* Key matrix configuration. */ - -// Rows are doubled-up. -#define MATRIX_ROWS 8 +#define MATRIX_ROWS 8 // Rows are doubled-up. #define MATRIX_COLS 5 -// Wiring configuration for each half. -#define MATRIX_ROW_PINS \ - { B7, C6, D4, B5 } -#define MATRIX_COL_PINS \ - { C7, F0, D7, E6, B4 } - -#define MATRIX_ROW_PINS_RIGHT \ - { F0, C6, D4, B5 } -#define MATRIX_COL_PINS_RIGHT \ - { C7, B7, D7, E6, B4 } - #define DIODE_DIRECTION ROW2COL -/* Handedness. */ -#define MASTER_RIGHT - -/* Bootmagic Lite configuration. */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 -#define BOOTMAGIC_LITE_ROW_RIGHT 4 -#define BOOTMAGIC_LITE_COLUMN_RIGHT 0 - -/* serial.c configuration (for split keyboard) */ -#define SOFT_SERIAL_PIN D2 - /* Set 0 if debouncing isn't needed. */ #define DEBOUNCE 5 -/* PMW33XX settings. */ -#define PMW33XX_CS_PIN B0 - -// Trackball angle adjustment. +/* Trackball angle adjustment. */ #define ROTATIONAL_TRANSFORM_ANGLE -25 /* RGB settings. */ - -#define RGB_DI_PIN D3 -#define RGBLED_NUM 35 +#define RGBLED_NUM 36 #define RGBLED_SPLIT \ - { 18, 17 } + { 18, 18 } /* RGB matrix support. */ #ifdef RGB_MATRIX_ENABLE diff --git a/keyboards/bastardkb/charybdis/3x5/info.json b/keyboards/bastardkb/charybdis/3x5/info.json index 03fb05664f..ece533944e 100644 --- a/keyboards/bastardkb/charybdis/3x5/info.json +++ b/keyboards/bastardkb/charybdis/3x5/info.json @@ -1,7 +1,8 @@ { - "keyboard_name": "Charybdis Nano", - "url": "https://www.bastardkb.com", - "maintainer": "Quentin Lebastard", + "url": "https://bastardkb.com/charybdis-nano", + "usb": { + "pid": "0x1832", + }, "layouts": { "LAYOUT_charybdis_3x5": { "layout": [ diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/README.md b/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/README.md new file mode 100644 index 0000000000..5d9f7fcd5f --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/README.md @@ -0,0 +1,3 @@ +# Charybdis (3x5) @bstiq keymap + +Inspired from Miryoku, using home-rows. diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/config.h new file mode 100644 index 0000000000..699a700063 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/config.h @@ -0,0 +1,166 @@ +/** + * Copyright 2021 Quentin LEBASTARD + * Copyright 2021 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#ifdef VIA_ENABLE +/* Via configuration. */ +# define DYNAMIC_KEYMAP_LAYER_COUNT 8 +#endif // VIA_ENABLE + +#ifndef __arm__ +/* Disable unused features. */ +# define NO_ACTION_ONESHOT +#endif // __arm__ + +/** + * Configure the global tapping term (default: 200ms). + * If you have a lot of accidental mod activations, crank up the tapping term. + * + * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term + */ +#ifndef TAPPING_TERM +# define TAPPING_TERM 160 +#endif // TAPPING_TERM + +/** + * Enable rapid switch from tap to hold. Disable auto-repeat when pressing key + * twice, except for one-shot keys. + * + * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold + */ +#define TAPPING_FORCE_HOLD + +/* + * Tap-or-Hold decision modes. + * + * Note that the following flags behave differently when combined (ie. when 2 or + * more are enabled). + * + * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold + * decision modes. + */ + +/** + * Faster tap-hold trigger. + * + * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`: + * Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae + * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`: + * Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e + * + * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold + */ +#define PERMISSIVE_HOLD + +/** + * Prevent normal rollover on alphas from accidentally triggering mods. + * + * Ignores key presses that interrupt a mod-tap. Must-have for Home Row mod. + * + * Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`: + * Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e + * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`: + * Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae + * + * See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt + */ +#define IGNORE_MOD_TAP_INTERRUPT + +/** Charybdis-specific features. */ + +#ifdef POINTING_DEVICE_ENABLE +// Automatically enable the pointer layer when moving the trackball. See also: +// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS` +// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD` +// #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE + +// Flip horizontal direction for drag-scroll. +# define CHARYBDIS_DRAGSCROLL_REVERSE_X +// #define CHARYBDIS_DRAGSCROLL_REVERSE_Y +#endif // POINTING_DEVICE_ENABLE + +/** RGB Matrix. */ + +#ifdef RGB_MATRIX_ENABLE +# ifdef __arm__ +// Enable all animations on ARM boards since they have plenty of memory +// available for it. +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +# else +// Disable control of RGB matrix by keycodes (must use firmware implementation +// to control the feature). +# define RGB_MATRIX_DISABLE_KEYCODES +# endif + +// Limit maximum brightness to keep power consumption reasonable, and avoid +// disconnects. +# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64 + +// Rainbow swirl as startup mode. +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT + +// Slow swirl at startup. +# define RGB_MATRIX_STARTUP_SPD 32 + +// Startup values. +# define RGB_MATRIX_STARTUP_HUE 0 +# define RGB_MATRIX_STARTUP_SAT 255 +# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS +# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL +#endif // RGB_MATRIX_ENABLE diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/keymap.c b/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/keymap.c new file mode 100644 index 0000000000..ca67dd690c --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/keymap.c @@ -0,0 +1,224 @@ +/** + * Copyright 2021 Quentin LEBASTARD + * Copyright 2021 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum charybdis_keymap_bstiq_layers { + LAYER_BASE = 0, + LAYER_MBO, + LAYER_MEDIA, + LAYER_NAV, + LAYER_MOUSE, + LAYER_SYM, + LAYER_NUM, + LAYER_FUN, +}; + +// Automatically enable sniping when the mouse layer is on. +#define CHARYBDIS_AUTO_SNIPING_ON_LAYER LAYER_MOUSE + +#define BSP_NAV LT(LAYER_NAV, KC_BSPC) +#define ENT_MBO LT(LAYER_MBO, KC_ENT) +#define TAB_MED LT(LAYER_MEDIA, KC_TAB) +#define ESC_SYM LT(LAYER_SYM, KC_ESC) +#define SPC_NUM LT(LAYER_NUM, KC_SPC) +#define MOUSE(KC) LT(LAYER_MOUSE, KC) + +#define USR_RDO KC_AGAIN +#define USR_PST S(KC_INS) +#define USR_CPY C(KC_INS) +#define USR_CUT S(KC_DEL) +#define USR_UND KC_UNDO + +#define MS_L KC_MS_LEFT +#define MS_R KC_MS_RIGHT +#define MS_D KC_MS_DOWN +#define MS_U KC_MS_UP + +#define WH_L KC_MS_WH_LEFT +#define WH_R KC_MS_WH_RIGHT +#define WH_D KC_MS_WH_DOWN +#define WH_U KC_MS_WH_UP + +// clang-format off +/** Convenience macro. */ +#define _KC_LAYOUT_wrapper( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + ...) \ + KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, \ + KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, \ + KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, \ + __VA_ARGS__ +#define KC_LAYOUT_wrapper(...) _KC_LAYOUT_wrapper(__VA_ARGS__) + +/** Base layer with BÉPO layout. */ +#define LAYOUT_LAYER_BASE_BEPO KC_LAYOUT_wrapper( \ + B, Z, P, O, QUOT, DOT, V, D, L, J, \ + A, U, I, E, COMM, C, T, S, R, N, \ + W, Y, X, SLSH, K, M, Q, G, H, F, \ + BSP_NAV, ENT_MBO, TAB_MED, ESC_SYM, SPC_NUM) + +/** Convenience key shorthands. */ +#define U_NA KC_NO // Present but not available for use. +#define U_NU KC_NO // Available but not used. + +/** Convenience row shorthands. */ +#define __________________RESET_L__________________ QK_BOOT, U_NA, U_NA, U_NA, U_NA +#define __________________RESET_R__________________ U_NA, U_NA, U_NA, U_NA, QK_BOOT +#define ______________HOME_ROW_GASC_L______________ KC_LGUI, KC_LALT, KC_LSFT, KC_LCTL, U_NA +#define ______________HOME_ROW_ALGR_L______________ U_NA, KC_ALGR, U_NA, U_NA, U_NA +#define ______________HOME_ROW_GASC_R______________ U_NA, KC_LCTL, KC_LSFT, KC_LALT, KC_LGUI +#define ______________HOME_ROW_ALGR_R______________ U_NA, U_NA, U_NA, KC_ALGR, U_NA + +/** Layers. */ + +// Buttons. +#define LAYOUT_LAYER_MBO \ + __________________RESET_L__________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \ + ______________HOME_ROW_GASC_L______________, KC_CAPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, \ + KC_BTN3, KC_ALGR, KC_BTN2, KC_BTN1, U_NA, KC_INS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, \ + U_NA, U_NA, U_NA, KC_ENT, KC_DEL + +// Media. +#define LAYOUT_LAYER_MEDIA \ + __________________RESET_L__________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \ + ______________HOME_ROW_GASC_L______________, U_NU, MS_L, MS_D, MS_U, MS_R, \ + ______________HOME_ROW_ALGR_L______________, U_NU, WH_L, WH_D, WH_U, WH_R, \ + U_NA, U_NA, U_NA, KC_BTN1, KC_BTN3 + +// Navigation. +#define LAYOUT_LAYER_NAV \ + __________________RESET_L__________________, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, \ + ______________HOME_ROW_GASC_L______________, U_NU, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, \ + ______________HOME_ROW_ALGR_L______________, U_NU, U_NU, U_NU, U_NU, U_NU, \ + U_NA, U_NA, U_NA, KC_MSTP, KC_MPLY + +// Mouse. +#define LAYOUT_LAYER_MOUSE \ + S_D_MOD, USR_PST, USR_CPY, USR_CUT, USR_UND, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \ + DPI_MOD, DRGSCRL, KC_LSFT, KC_LCTL, _______, U_NU, MS_L, MS_D, MS_U, MS_R, \ + USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, U_NU, WH_L, WH_D, WH_U, WH_R, \ + KC_BTN2, KC_BTN1, KC_BTN3, KC_BTN1, KC_BTN3 + +// Symbols. +#define LAYOUT_LAYER_SYM \ + KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, __________________RESET_R__________________, \ + KC_COLN, KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, ______________HOME_ROW_GASC_R______________, \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_PIPE, ______________HOME_ROW_ALGR_R______________, \ + KC_LPRN, KC_RPRN, KC_UNDS, U_NA, U_NA + +// Numerals. +#define LAYOUT_LAYER_NUM \ + KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, __________________RESET_R__________________, \ + KC_SCLN, KC_4, KC_5, KC_6, KC_EQL, ______________HOME_ROW_GASC_R______________, \ + KC_GRV, KC_1, KC_2, KC_3, KC_BSLS, ______________HOME_ROW_ALGR_R______________, \ + KC_DOT, KC_0, KC_MINS, U_NA, U_NA + +// Function keys. +#define LAYOUT_LAYER_FUN \ + KC_F12, KC_F7, KC_F8, KC_F9, KC_PSCR, __________________RESET_R__________________, \ + KC_F11, KC_F4, KC_F5, KC_F6, KC_SLCK, ______________HOME_ROW_GASC_R______________, \ + KC_F10, KC_F1, KC_F2, KC_F3, KC_PAUS, ______________HOME_ROW_ALGR_R______________,\ + KC_APP, KC_SPC, KC_TAB, U_NA, U_NA + +/** + * Add Home Row mod to a layout. + * + * Expects a 10-key per row layout. Adds support for GASC (Gui, Alt, Shift, Ctl) + * home row. The layout passed in parameter must contain at least 20 keycodes. + * + * This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.: + * + * HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO) + */ +#define _HOME_ROW_MOD_GASC( \ + L00, L01, L02, L03, L04, R05, R06, R07, R08, R09, \ + L10, L11, L12, L13, L14, R15, R16, R17, R18, R19, \ + ...) \ + L00, L01, L02, L03, L04, \ + R05, R06, R07, R08, R09, \ + LGUI_T(L10), LALT_T(L11), LSFT_T(L12), LCTL_T(L13), L14, \ + R15, RCTL_T(R16), RSFT_T(R17), LALT_T(R18), RGUI_T(R19), \ + __VA_ARGS__ +#define HOME_ROW_MOD_GASC(...) _HOME_ROW_MOD_GASC(__VA_ARGS__) + +/** + * Add mouse layer keys to a layout. + * + * Expects a 10-key per row layout. The layout passed in parameter must contain + * at least 30 keycodes. + * + * This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.: + * + * MOUSE_MOD(LAYOUT_LAYER_BASE_BEPO) + */ +#define _MOUSE_MOD( \ + L00, L01, L02, L03, L04, R05, R06, R07, R08, R09, \ + L10, L11, L12, L13, L14, R15, R16, R17, R18, R19, \ + L20, L21, L22, L23, L24, R25, R26, R27, R28, R29, \ + ...) \ + L00, L01, L02, L03, L04, \ + R05, R06, R07, R08, R09, \ + L10, L11, L12, L13, L14, \ + R15, R16, R17, R18, R19, \ + MOUSE(L20), L21, L22, L23, L24, \ + R25, R26, R27, R28, MOUSE(R29), \ + __VA_ARGS__ +#define MOUSE_MOD(...) _MOUSE_MOD(__VA_ARGS__) + +#define LAYOUT_wrapper(...) LAYOUT_charybdis_3x5(__VA_ARGS__) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [LAYER_BASE] = LAYOUT_wrapper( + MOUSE_MOD(HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO)) + ), + [LAYER_MBO] = LAYOUT_wrapper(LAYOUT_LAYER_MBO), + [LAYER_MEDIA] = LAYOUT_wrapper(LAYOUT_LAYER_MEDIA), + [LAYER_NAV] = LAYOUT_wrapper(LAYOUT_LAYER_NAV), + [LAYER_MOUSE] = LAYOUT_wrapper(LAYOUT_LAYER_MOUSE), + [LAYER_SYM] = LAYOUT_wrapper(LAYOUT_LAYER_SYM), + [LAYER_NUM] = LAYOUT_wrapper(LAYOUT_LAYER_NUM), + [LAYER_FUN] = LAYOUT_wrapper(LAYOUT_LAYER_FUN), +}; +// clang-format on + +#if defined(POINTING_DEVICE_ENABLE) && defined(CHARYBDIS_AUTO_SNIPING_ON_LAYER) +layer_state_t layer_state_set_kb(layer_state_t state) { + state = layer_state_set_user(state); + charybdis_set_pointer_sniping_enabled(layer_state_cmp(state, CHARYBDIS_AUTO_SNIPING_ON_LAYER)); + return state; +} +#endif // POINTING_DEVICE_ENABLE && CHARYBDIS_AUTO_SNIPING_ON_LAYER + +#ifdef RGB_MATRIX_ENABLE +// Forward-declare this helper function since it is defined in rgb_matrix.c. +void rgb_matrix_update_pwm_buffers(void); +#endif + +void shutdown_user(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_enable_noeeprom(); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + rgblight_setrgb_red(); +#endif // RGBLIGHT_ENABLE +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_set_color_all(RGB_RED); + rgb_matrix_update_pwm_buffers(); +#endif // RGB_MATRIX_ENABLE +} diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/rules.mk b/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/rules.mk new file mode 100644 index 0000000000..5d91064607 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/rules.mk @@ -0,0 +1,10 @@ +ifeq ($(MCU),atmega32u4) + # Space saving settings. + TAP_DANCE_ENABLE = no + COMBO_ENABLE = no + QMK_SETTINGS = no +else ifeq ($(MCU),STM32F411) + EEPROM_DRIVER = vendor +endif + +VIA_ENABLE = yes diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/default/keymap.c b/keyboards/bastardkb/charybdis/3x5/keymaps/default/keymap.c index cb578aa8d6..148f026740 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/default/keymap.c +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/default/keymap.c @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX, KC_PPLS, KC_4, KC_5, KC_6, KC_PMNS, // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ - XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, KC_PAST, KC_1, KC_2, KC_3, KC_PSLS, + XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, KC_PAST, KC_1, KC_2, KC_3, KC_PSLS, // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯ XXXXXXX, XXXXXXX, _______, XXXXXXX, _______ // ╰───────────────────────────╯ ╰──────────────────╯ @@ -61,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_RSFT, KC_RCTL, KC_RALT, KC_RGUI, // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤ - KC_HOME, KC_PGUP, KC_PGDN, KC_END, XXXXXXX, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, + KC_HOME, KC_PGUP, KC_PGDN, KC_END, XXXXXXX, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯ _______, _______, XXXXXXX, _______, XXXXXXX // ╰───────────────────────────╯ ╰──────────────────╯ diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h index f515d85334..d20131e9cf 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h @@ -19,7 +19,7 @@ #ifdef VIA_ENABLE /* VIA configuration. */ # define DYNAMIC_KEYMAP_LAYER_COUNT 7 -#endif // VIA_ENABLE +#endif // VIA_ENABLE /* Disable unused features. */ #define NO_ACTION_ONESHOT @@ -33,7 +33,7 @@ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term */ # define TAPPING_TERM 200 -#endif // TAPPING_TERM +#endif // TAPPING_TERM /** * \brief Enable rapid switch from tap to hold. @@ -84,16 +84,11 @@ /* Charybdis-specific features. */ #ifdef POINTING_DEVICE_ENABLE -// Enable pointer acceleration, which increases the speed by ~2x for large -// displacement, while maintaining 1x speed for slow movements. See also: -// - `CHARYBDIS_POINTER_ACCELERATION_FACTOR` -# define CHARYBDIS_POINTER_ACCELERATION_ENABLE - // Automatically enable the pointer layer when moving the trackball. See also: // - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS` // - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD` // #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE -#endif // POINTING_DEVICE_ENABLE +#endif // POINTING_DEVICE_ENABLE /* RGB Matrix. */ @@ -115,4 +110,4 @@ # define RGB_MATRIX_STARTUP_SAT 255 # define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL -#endif // RGB_MATRIX_ENABLE +#endif // RGB_MATRIX_ENABLE diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/via/keymap.c b/keyboards/bastardkb/charybdis/3x5/keymaps/via/keymap.c index dc02ed34c6..b54c58cf0c 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/via/keymap.c +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/via/keymap.c @@ -18,7 +18,7 @@ #ifdef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE # include "timer.h" -#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE +#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE enum charybdis_keymap_layers { LAYER_BASE = 0, @@ -38,12 +38,12 @@ static uint16_t auto_pointer_layer_timer = 0; # ifndef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS # define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000 -# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS +# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS # ifndef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD # define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8 -# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD -#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE +# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD +#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE #define ESC_MED LT(LAYER_MEDIA, KC_ESC) #define SPC_NAV LT(LAYER_NAVIGATION, KC_SPC) @@ -52,6 +52,13 @@ static uint16_t auto_pointer_layer_timer = 0; #define BSP_NUM LT(LAYER_NUMERAL, KC_BSPC) #define _L_PTR(KC) LT(LAYER_POINTER, KC) +#ifndef POINTING_DEVICE_ENABLE +# define DRGSCRL KC_NO +# define DPI_MOD KC_NO +# define S_D_MOD KC_NO +# define SNIPING KC_NO +#endif // !POINTING_DEVICE_ENABLE + // clang-format off /** \brief QWERTY layout (3 rows, 10 columns). */ #define LAYOUT_LAYER_BASE \ @@ -98,14 +105,14 @@ static uint16_t auto_pointer_layer_timer = 0; #define LAYOUT_LAYER_MEDIA \ XXXXXXX,RGB_RMOD, RGB_TOG, RGB_MOD, XXXXXXX, XXXXXXX,RGB_RMOD, RGB_TOG, RGB_MOD, XXXXXXX, \ KC_MPRV, KC_VOLD, KC_MUTE, KC_VOLU, KC_MNXT, KC_MPRV, KC_VOLD, KC_MUTE, KC_VOLU, KC_MNXT, \ - XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, \ _______, KC_MPLY, KC_MSTP, KC_MSTP, KC_MPLY /** \brief Mouse emulation and pointer functions. */ #define LAYOUT_LAYER_POINTER \ XXXXXXX, XXXXXXX, XXXXXXX, DPI_MOD, S_D_MOD, S_D_MOD, DPI_MOD, XXXXXXX, XXXXXXX, XXXXXXX, \ ______________HOME_ROW_GACS_L______________, ______________HOME_ROW_GACS_R______________, \ - _______, DRGSCRL, SNIPING, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, SNIPING, DRGSCRL, _______, \ + _______, DRGSCRL, SNIPING, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, SNIPING, DRGSCRL, _______, \ KC_BTN2, KC_BTN1, KC_BTN3, KC_BTN3, KC_BTN1 /** @@ -217,36 +224,35 @@ report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { # ifdef RGB_MATRIX_ENABLE rgb_matrix_mode_noeeprom(RGB_MATRIX_NONE); rgb_matrix_sethsv_noeeprom(HSV_GREEN); -# endif // RGB_MATRIX_ENABLE +# endif // RGB_MATRIX_ENABLE } auto_pointer_layer_timer = timer_read(); } return mouse_report; } -void matrix_scan_kb(void) { +void matrix_scan_user(void) { if (auto_pointer_layer_timer != 0 && TIMER_DIFF_16(timer_read(), auto_pointer_layer_timer) >= CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS) { auto_pointer_layer_timer = 0; layer_off(LAYER_POINTER); # ifdef RGB_MATRIX_ENABLE rgb_matrix_mode_noeeprom(RGB_MATRIX_STARTUP_MODE); -# endif // RGB_MATRIX_ENABLE +# endif // RGB_MATRIX_ENABLE } - matrix_scan_user(); } -# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE +# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE # ifdef CHARYBDIS_AUTO_SNIPING_ON_LAYER -layer_state_t layer_state_set_kb(layer_state_t state) { - state = layer_state_set_user(state); +layer_state_t layer_state_set_user(layer_state_t state) { charybdis_set_pointer_sniping_enabled(layer_state_cmp(state, CHARYBDIS_AUTO_SNIPING_ON_LAYER)); return state; } -# endif // CHARYBDIS_AUTO_SNIPING_ON_LAYER -#endif // POINTING_DEVICE_ENABLE +# endif // CHARYBDIS_AUTO_SNIPING_ON_LAYER +#endif // POINTING_DEVICE_ENABLE #ifdef RGB_MATRIX_ENABLE -// Forward-declare this helper function since it is defined in rgb_matrix.c. +// Forward-declare this helper function since it is defined in +// rgb_matrix.c. void rgb_matrix_update_pwm_buffers(void); #endif @@ -255,9 +261,9 @@ void shutdown_user(void) { rgblight_enable_noeeprom(); rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); rgblight_setrgb_red(); -#endif // RGBLIGHT_ENABLE +#endif // RGBLIGHT_ENABLE #ifdef RGB_MATRIX_ENABLE rgb_matrix_set_color_all(RGB_RED); rgb_matrix_update_pwm_buffers(); -#endif // RGB_MATRIX_ENABLE +#endif // RGB_MATRIX_ENABLE } diff --git a/keyboards/bastardkb/charybdis/3x5/rules.mk b/keyboards/bastardkb/charybdis/3x5/rules.mk deleted file mode 100644 index c5f3f0fb8c..0000000000 --- a/keyboards/bastardkb/charybdis/3x5/rules.mk +++ /dev/null @@ -1,38 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output - -AUDIO_SUPPORTED = no # Audio is not supported -RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default -RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default -RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality -RGB_MATRIX_DRIVER = WS2812 - -# Enable link-time optimization by default. The Charybdis packs a lot of -# features (RGB, Via, trackball) in a small atmega32u4 package. -LTO_ENABLE = yes - -# Charybdis nano is a split 3x5 keyboard with a maximum of 3 thumb keys (2 on -# the trackball side). -SPLIT_KEYBOARD = yes -LAYOUTS = split_3x5_3 # Support community layout, in particular Manna-Harbour's Miryoku layout - -POINTING_DEVICE_ENABLE = yes # Enable trackball -POINTING_DEVICE_DRIVER = pmw3360 -# https://qmk.fm/changes/2018-11-16-use-a-single-endpoint-for-hid-reports -MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint diff --git a/keyboards/bastardkb/charybdis/3x5/v1/elitec/config.h b/keyboards/bastardkb/charybdis/3x5/v1/elitec/config.h new file mode 100644 index 0000000000..3e3d95174c --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v1/elitec/config.h @@ -0,0 +1,42 @@ +/* + * Copyright 2020 Christopher Courtney (@drashna) + * Copyright 2021 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { B7, C6, D4, B5 } +#define MATRIX_COL_PINS \ + { C7, F0, D7, E6, B4 } + +#define MATRIX_ROW_PINS_RIGHT \ + { F0, C6, D4, B5 } +#define MATRIX_COL_PINS_RIGHT \ + { C7, B7, D7, E6, B4 } + +/* Handedness. */ +#define MASTER_RIGHT + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN D2 + +/* RGB settings. */ +#define RGB_DI_PIN D3 + +/* PMW3360 settings. */ +#define PMW33XX_CS_PIN B0 diff --git a/keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json b/keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json new file mode 100644 index 0000000000..9071212f33 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Charybdis Nano (3x5) Elite-C", + "usb": { + "device_version": "1.0.0", + }, +} diff --git a/keyboards/bastardkb/charybdis/3x5/v1/elitec/rules.mk b/keyboards/bastardkb/charybdis/3x5/v1/elitec/rules.mk new file mode 100644 index 0000000000..22bd22652a --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v1/elitec/rules.mk @@ -0,0 +1,37 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality +RGB_MATRIX_DRIVER = WS2812 + +# Charybdis nano is a split 3x5 keyboard with a maximum of 3 thumb keys (2 on +# the trackball side). +SPLIT_KEYBOARD = yes +LAYOUTS = split_3x5_3 # Support community layout, in particular Manna-Harbour's Miryoku layout + +POINTING_DEVICE_ENABLE = yes # Enable trackball +POINTING_DEVICE_DRIVER = pmw3360 +MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint + +# Enable link-time optimization by default. The Charybdis packs a lot of +# features (RGB, Via, trackball) in a small atmega32u4 package. +LTO_ENABLE = yes diff --git a/keyboards/bastardkb/charybdis/3x5/v2/elitec/config.h b/keyboards/bastardkb/charybdis/3x5/v2/elitec/config.h new file mode 100644 index 0000000000..5c11fa3145 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v2/elitec/config.h @@ -0,0 +1,36 @@ +/* + * Copyright 2022 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { F7, C6, D4, B5 } +#define MATRIX_COL_PINS \ + { F5, B6, D7, E6, B4 } + +/* Handedness. */ +#define MASTER_RIGHT + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN D2 + +/* RGB settings. */ +#define RGB_DI_PIN D3 + +/* PMW3360 settings. */ +#define PMW33XX_CS_PIN F0 diff --git a/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json b/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json new file mode 100644 index 0000000000..7c90e5d5a3 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Charybdis Nano (3x5) Elite-C", + "usb": { + "device_version": "2.0.0", + }, +} diff --git a/keyboards/bastardkb/charybdis/3x5/v2/elitec/rules.mk b/keyboards/bastardkb/charybdis/3x5/v2/elitec/rules.mk new file mode 100644 index 0000000000..22bd22652a --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v2/elitec/rules.mk @@ -0,0 +1,37 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality +RGB_MATRIX_DRIVER = WS2812 + +# Charybdis nano is a split 3x5 keyboard with a maximum of 3 thumb keys (2 on +# the trackball side). +SPLIT_KEYBOARD = yes +LAYOUTS = split_3x5_3 # Support community layout, in particular Manna-Harbour's Miryoku layout + +POINTING_DEVICE_ENABLE = yes # Enable trackball +POINTING_DEVICE_DRIVER = pmw3360 +MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint + +# Enable link-time optimization by default. The Charybdis packs a lot of +# features (RGB, Via, trackball) in a small atmega32u4 package. +LTO_ENABLE = yes diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h new file mode 100644 index 0000000000..2929d3dd1e --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h @@ -0,0 +1,50 @@ +/* + * Copyright 2022 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { GP26, GP5, GP4, GP9 } +#define MATRIX_COL_PINS \ + { GP28, GP15, GP6, GP7, GP8 } + +/* Handedness. */ +#define MASTER_RIGHT + +// To use the handedness pin, resistors need to be installed on the adapter PCB. +// If so, uncomment the following code, and undefine MASTER_RIGHT above. +// #define SPLIT_HAND_PIN GP13 +// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left. + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN GP1 + +/* RGB settings. */ +#define RGB_DI_PIN GP0 + +/* SPI & PMW3360 settings. */ +#define SPI_DRIVER SPID0 +#define SPI_SCK_PIN GP18 +#define SPI_MOSI_PIN GP19 +#define SPI_MISO_PIN GP20 +#define PMW33XX_CS_PIN GP14 + +/* Reset. */ +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17 +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json b/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json new file mode 100644 index 0000000000..1aa1e8811d --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Charybdis Nano (3x5) Splinky", + "usb": { + "device_version": "2.0.0", + }, +} diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/mcuconf.h b/keyboards/bastardkb/charybdis/3x5/v2/splinky/mcuconf.h new file mode 100644 index 0000000000..0fdd67c3a2 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/mcuconf.h @@ -0,0 +1,23 @@ +/* + * Copyright 2022 Charly Delay (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include_next "mcuconf.h" + +#undef RP_SPI_USE_SPI0 +#define RP_SPI_USE_SPI0 TRUE diff --git a/keyboards/bastardkb/charybdis/3x5/v2/splinky/rules.mk b/keyboards/bastardkb/charybdis/3x5/v2/splinky/rules.mk new file mode 100644 index 0000000000..21a9506077 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/v2/splinky/rules.mk @@ -0,0 +1,37 @@ +# MCU name +MCU = RP2040 + +# Bootloader selection +BOOTLOADER = rp2040 + +# RP2040-specific options +ALLOW_WARNINGS = yes +PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS. + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality +RGB_MATRIX_DRIVER = WS2812 + +SPLIT_KEYBOARD = yes +LAYOUTS = split_3x5_3 + +POINTING_DEVICE_ENABLE = yes # Enable trackball +POINTING_DEVICE_DRIVER = pmw3360 + +SERIAL_DRIVER = vendor +WS2812_DRIVER = vendor -- cgit v1.2.3