From bd8e257f842e40f01041706a217be2cf85ae7f92 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20A=2E=20Volpato?= Date: Fri, 28 Jan 2022 21:19:11 -0300 Subject: [Keyboard] Adds Elongate Revision Delta PCB support (#15498) Co-authored-by: Drashna Jaelre Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan --- keyboards/acheron/elongate/delta/readme.md | 43 ++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100755 keyboards/acheron/elongate/delta/readme.md (limited to 'keyboards/acheron/elongate/delta/readme.md') diff --git a/keyboards/acheron/elongate/delta/readme.md b/keyboards/acheron/elongate/delta/readme.md new file mode 100755 index 0000000000..055b02ee04 --- /dev/null +++ b/keyboards/acheron/elongate/delta/readme.md @@ -0,0 +1,43 @@ +# Acheron Elongate rev. Delta QMK firmware repository + +![](https://i.imgur.com/G9LESkUh.jpg) + +* Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim) +* Hardware Supported: [open-source PCB](https://github.com/AcheronProject/Elongate) powered by STM32F072 microcontroller +* Hardware Availability: as of december 2021, the group buy for Elongate is already over and extras sales are pending. + +## Introduction + +This is the QMK firmware repository for the Elongate PCB revision Delta, which was the revision publicly sold at the group buy. Revisions Alpha and Beta were sold in private group buys and never ran publicly. + +The Elongate PCB is an Open-Hardware-guideline-compliant PCB which files can be found at [this repository](https://github.com/AcheronProject/Elongate). Its designer and maintainer is [Gondolindrim](https://github.com/Gondolindrim). + +## How to flash + +### Enter bootloader + +The DFU state in the bootloader can be accessed in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds +* **Keycode in layout**: Press the key mapped to `RESET` if it is available (escape key at layer 2 in the default firmware) + +## Compile firmware + +You can build the default layout firwmare for Elongate after setting up your build environment by using: + + make acheron/elongate/delta:default + +After entering DFU state in your PCB, you can download the binary file generated through `dfu-util` or a GUI like QMK Toolbox. + +To directly flash the PCB after it is put into a DFU state, use + + make acheron/elongate/delta:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## PCB Documentation + +See the [AcheronDocs](https://acheronproject.com/pcbs/elongate/) page for the ElongatePCB full documentation. You can also check the KiCad PCB files at the [Elongate GitHub repository](https://github.com/AcheronProject/Elongate). + +Before using the files for personal or commercial use, please read the [Acheron Open-Hardware License V1.4](https://acheronproject.com/AOHL14/) under which the Elongate PCB is published. -- cgit v1.2.3