From 98c1f7a9ef569802ab3606eac098e388109f4025 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20A=2E=20Volpato?= Date: Sat, 23 Jul 2022 21:09:52 -0300 Subject: [Keyboard] Apollo87H PCB support (#16817) * Initial Apollo87H support * Define RGB animations and default animation * Add proper per-key RGB support * Adjust LED positions * Separate delta-gamma * Fine-tune LED positions * fix up GAMMA revision * fix up tabs indentation to spaces indentation * Fixed positioning and CS-SW defs for some LEDs * Fix INS RGB position * Fine-tune LED positions, fix default RGB * Update readme's * Rename LAYOUT_87H to lowercase 87h * Formatting gamma's rules.mk * Formatting delta's rules.mk * Use smaller readme image * Use smaller README image * First support for 87H-T-SC and 88H-T-SC * Update README * Fix layout naming * Remove * Remove EEPROM definitions, fix missing RGB LED mod/alpha definer * Add suggestions from noroadsleft --- keyboards/acheron/apollo/87h/readme.md | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 keyboards/acheron/apollo/87h/readme.md (limited to 'keyboards/acheron/apollo/87h/readme.md') diff --git a/keyboards/acheron/apollo/87h/readme.md b/keyboards/acheron/apollo/87h/readme.md new file mode 100644 index 0000000000..f00dae4450 --- /dev/null +++ b/keyboards/acheron/apollo/87h/readme.md @@ -0,0 +1,25 @@ +# Acheron Apollo87H QMK firmware + +![apollo](https://acheronproject.com/images/apollo/delta-pictures/delta1_small.jpeg) + +The Apollo87H is Acheron Project's open-source, freely available tenkeyless (TKL) keyboard Printed Circuit Boards (PCB) which features: + +- Per-key RGB lighting +- Hotswap sockets +- ANSI default layout with F12 and 6.25 units spacebar. + +* Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim) +* Hardware Supported: open-source PCB using the [Joker template](https://acheronproject.com/joker_mcus/joker/). First units were manufactured using STM32F401 microcontroller; +* Hardware Availability: these PCBs are open-source so you can manufacture them yourself or order them from a factory. See the [project's documentation](https://acheronproject.com/pcbs/apollo/apollo/) for more information. + +In order to flash this PCB, first build the default layout (after setting up your build environment): + + make acheron/apollo/87h/:default + +Where `revision` is the revision of your PCB. Two revisions were prototyped and sold: _Gamma_ and _Delta_. Look into the label on the PCB's back to see what revision is yours. Ready-to-use binaries for the default and the VIA layouts are available in the release pages of the [project's repository](https://github.com/AcheronProject/Apollo87H). + +After building or downloading the firmware, put the PCB into DFU mode by holding the reset button for at least five seconds and upload the firmware onto the microcontroller through a utility like `dfu-util` or QMK Toolbox. Alternatively, you can build and flash using: + + make acheron/apollo/87h/:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3