From f6c7e114260890292dcd12645db7fecd64167973 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 16 Jul 2019 01:40:54 -0700 Subject: Remove the need to specify NUM_OF_ENCODERS for the Encoder feature (#6328) * Remove the need to set NUM_OF_ENCODERS Instead, calculate the size of the array, and use that instead * Add hack for split common support * Remove NUM_OF_ENCODERS from keyboard config Can be reverted, if needed --- keyboards/abstract/ellipse/rev1/config.h | 1 - 1 file changed, 1 deletion(-) (limited to 'keyboards/abstract/ellipse/rev1') diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h index a56bfba2fa..1fb9b76d9c 100644 --- a/keyboards/abstract/ellipse/rev1/config.h +++ b/keyboards/abstract/ellipse/rev1/config.h @@ -239,7 +239,6 @@ along with this program. If not, see . // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 -#define NUMBER_OF_ENCODERS 3 #define ENCODERS_PAD_A { B2, B3, D5 } #define ENCODERS_PAD_B { B1, B7, B4 } #define ENCODER_RESOLUTION 2 -- cgit v1.2.3 From 6c7d173ad74048081b5d0be6f6052013b0a25ff3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Konstantin=20=C4=90or=C4=91evi=C4=87?= Date: Tue, 16 Jul 2019 18:17:46 +0200 Subject: Remove unnecessary IS_COMMAND definitions from a couple of boards --- keyboards/abstract/ellipse/rev1/config.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'keyboards/abstract/ellipse/rev1') diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h index 1fb9b76d9c..36a4fc40f2 100644 --- a/keyboards/abstract/ellipse/rev1/config.h +++ b/keyboards/abstract/ellipse/rev1/config.h @@ -125,11 +125,6 @@ along with this program. If not, see . * */ -/* key combination for magic key command */ -/*#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -)*/ - /* control how magic key switches layers */ //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -- cgit v1.2.3 From e8b65d01709c2ebdf50c0aa95963d200fa4fa4c6 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sun, 6 Oct 2019 05:09:35 +1100 Subject: Cleanup rules.mk for 32U4 keyboards, A-F (#6804) * Cleanup rules.mk for 32U4 keyboards, A-F * Put back stuff in VIA keymaps --- keyboards/abstract/ellipse/rev1/rules.mk | 51 ++------------------------------ 1 file changed, 2 insertions(+), 49 deletions(-) (limited to 'keyboards/abstract/ellipse/rev1') diff --git a/keyboards/abstract/ellipse/rev1/rules.mk b/keyboards/abstract/ellipse/rev1/rules.mk index 880d40e49b..6c7f5fea32 100644 --- a/keyboards/abstract/ellipse/rev1/rules.mk +++ b/keyboards/abstract/ellipse/rev1/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # -- cgit v1.2.3