From 8a5e8ed88e818e2a4ccd1349ea63cb35042e674f Mon Sep 17 00:00:00 2001 From: 4pplet Date: Mon, 3 Apr 2023 07:24:49 +0200 Subject: Adding Unextended Standard PCB (#20190) Co-authored-by: Drashna Jaelre Co-authored-by: 4pplet <4pplet@protonmail.com> Co-authored-by: 4pplet --- keyboards/4pplet/unextended_std/readme.md | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 keyboards/4pplet/unextended_std/readme.md (limited to 'keyboards/4pplet/unextended_std/readme.md') diff --git a/keyboards/4pplet/unextended_std/readme.md b/keyboards/4pplet/unextended_std/readme.md new file mode 100644 index 0000000000..2d276511ed --- /dev/null +++ b/keyboards/4pplet/unextended_std/readme.md @@ -0,0 +1,23 @@ +# Unextended Standard PCB + +PCB for the Unextended Standard Project. The PCB enables use of M0116, M0118, IIc and NeXT keycaps and is designed to fit in the open sourced Unextended case. + +* Keyboard Maintainer: [4pplet](https://github.com/4pplet) +* Hardware Supported: [Unextended Standard PCB](https://github.com/4pplet/Unextended-Standard-PCB) + +Make example for this keyboard (after setting up your build environment): + + make 4pplet/unextended_std/rev_a:default + +Flashing example for this keyboard: + + make 4pplet/unextended_std/rev_a:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the Escape-key and plug in the keyboard +* **Physical reset header**: Briefly short the header labled "BL/reset" on the PCB +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3