From 31a298f9d9bc78f504d662e1590ec333c1f37735 Mon Sep 17 00:00:00 2001
From: tmk <nobody@nowhere>
Date: Tue, 1 Jul 2014 04:29:45 +0900
Subject: Add RN-42 Bluetooth module support

---
 keyboard/hhkb_rn42/config.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

(limited to 'keyboard/hhkb_rn42/config.h')

diff --git a/keyboard/hhkb_rn42/config.h b/keyboard/hhkb_rn42/config.h
index a8f76ae6b0..a0ab878eb8 100644
--- a/keyboard/hhkb_rn42/config.h
+++ b/keyboard/hhkb_rn42/config.h
@@ -47,6 +47,35 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BOOTMAGIC_KEY_SALT      KC_FN6
 
 
+/*
+ * Hardware Serial(UART)
+ *     Baud rate are calculated with round off(+0.5).
+ */
+#ifdef __AVR_ATmega32U4__
+    /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
+    #define UCSR1D _SFR_MEM8(0xCB)
+    #define RTSEN 0
+    #define CTSEN 1
+
+    #define SERIAL_UART_BAUD       115200
+    #define SERIAL_UART_DATA       UDR1
+    #define SERIAL_UART_UBRR       ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
+    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
+    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
+    #define SERIAL_UART_INIT()     do { \
+        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
+        UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8);  /* baud rate */ \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+        UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
+        UCSR1C |= (0<<UPM11) | (0<<UPM10);  /* parity: none(00), even(01), odd(11) */ \
+        UCSR1D |= (0<<RTSEN) | (0<<CTSEN);  /* RTS, CTS */ \
+        sei(); \
+    } while(0)
+#else
+    #error "USART configuration is needed."
+#endif
+
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
-- 
cgit v1.2.3