From d9e4dad0a828a8a904f44dda090a4d6d08fe2948 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sat, 11 Jun 2016 13:31:31 -0400 Subject: Makefile redo & other features (#395) * .build containment implemented * no destructive variable setting - builds in either folder * make from 3 places * cleans before each build * make from root with keyboard=keyboard, keymap=keymap * make from keyboard/keyboard with keymap=keymap * make from keymaps/keymap * only implemented on planck * adds color diag to avr-gcc * makefiles for all plancks, clean-up * quick build-all makefile for plancks * reformatting of make output (colors) * color toggle, tmk path corrections * correct if statement for color * move config.h to main makefile, updates preonic, atomic * format update, all keyboards targets * makefile optional for build all target, alps and arrow_pad updated * alps updated * make planck default, trying out travis recipe for all-keyboards * all-keymaps target, different travis recipe * updates alps64 * updates keyboards to new format * updates clue* projects * all projects updated, specialise EZ .hex, let .hex through * updates travis * automatically find root, keyboard, keymap * silent echo, cleaned-up mass make output * updates all keyboards' .hex files except EZ * Rename Bantam44.c to bantam44.c * Rename Bantam44.h to bantam44.h * nananana * adds six key keyboard * does same to ez as rest * updates send_string example * brings ergodox_ez up to date * updates template/new project script * adds sixkeyboard * adds readme for sixkeyboard * adds sixkeyboard to travis * filenames, gitignore mess * define clock prescaler stuff manually * make quick, size test example * documentation and dfu-no-build --- keyboard/gh60_rev_c/Makefile | 140 ------------------------------ keyboard/gh60_rev_c/README.md | 60 ------------- keyboard/gh60_rev_c/config.h | 158 ---------------------------------- keyboard/gh60_rev_c/gh60.c | 68 --------------- keyboard/gh60_rev_c/gh60.h | 81 ----------------- keyboard/gh60_rev_c/gh60revc.jpg | Bin 1424987 -> 0 bytes keyboard/gh60_rev_c/keymaps/default.c | 69 --------------- keyboard/gh60_rev_c/pinout.txt | 18 ---- 8 files changed, 594 deletions(-) delete mode 100644 keyboard/gh60_rev_c/Makefile delete mode 100644 keyboard/gh60_rev_c/README.md delete mode 100644 keyboard/gh60_rev_c/config.h delete mode 100644 keyboard/gh60_rev_c/gh60.c delete mode 100644 keyboard/gh60_rev_c/gh60.h delete mode 100644 keyboard/gh60_rev_c/gh60revc.jpg delete mode 100644 keyboard/gh60_rev_c/keymaps/default.c delete mode 100644 keyboard/gh60_rev_c/pinout.txt (limited to 'keyboard/gh60_rev_c') diff --git a/keyboard/gh60_rev_c/Makefile b/keyboard/gh60_rev_c/Makefile deleted file mode 100644 index 09843dd83d..0000000000 --- a/keyboard/gh60_rev_c/Makefile +++ /dev/null @@ -1,140 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = gh60 - - -# Directory common source filess exist -TOP_DIR = ../.. -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# # project specific files -SRC = gh60.c - -ifdef KEYMAP - SRC := keymaps/$(KEYMAP).c $(SRC) -else - SRC := keymaps/default.c $(SRC) -endif - -CONFIG_H = config.h - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -# Optimize size but this may cause error "relocation truncated to fit" -#EXTRALDFLAGS = -Wl,--relax - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TOP_DIR) -VPATH += $(TMK_DIR) - -include $(TOP_DIR)/quantum/quantum.mk - diff --git a/keyboard/gh60_rev_c/README.md b/keyboard/gh60_rev_c/README.md deleted file mode 100644 index bf209be8c6..0000000000 --- a/keyboard/gh60_rev_c/README.md +++ /dev/null @@ -1,60 +0,0 @@ -## gh60 Rev C keyboard firmware - -![gh60 Rev C PCB](gh60revc.jpg) - - /* Column pin configuration - * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 - * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) - */ - - /* Row pin configuration - * row: 0 1 2 3 4 - * pin: D0 D1 D2 D3 D5 - */ - - GPIO pads - 0 F7 WASD LEDs - 1 F6 ESC LED - 2 F5 FN LED - 3 F4 POKER Arrow LEDs - - B2 Capslock LED - B0 not connected - -Functions to controls LED clusters - - gh60_caps_led_on() - gh60_poker_leds_on() - gh60_fn_led_on() - gh60_esc_led_on() - gh60_wasd_leds_on() - - gh60_caps_led_off() - gh60_poker_leds_off() - gh60_fn_led_off() - gh60_esc_led_off() - gh60_wasd_leds_off() - -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent README.md](/README.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboard/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make`. - -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` in the keymaps folder, and see keymap document (you can find in top README.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: -``` -$ make KEYMAP=[default|jack|] -``` -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboard/gh60_rev_c/config.h b/keyboard/gh60_rev_c/config.h deleted file mode 100644 index 827c08d1be..0000000000 --- a/keyboard/gh60_rev_c/config.h +++ /dev/null @@ -1,158 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER You -#define PRODUCT gh60 -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboard/gh60_rev_c/gh60.c b/keyboard/gh60_rev_c/gh60.c deleted file mode 100644 index 6da4d8ee3e..0000000000 --- a/keyboard/gh60_rev_c/gh60.c +++ /dev/null @@ -1,68 +0,0 @@ -#include "gh60.h" -#include "led.h" - -__attribute__ ((weak)) -void matrix_init_user(void) { - // leave this function blank - it can be defined in a keymap file -}; - -__attribute__ ((weak)) -void matrix_scan_user(void) { - // leave this function blank - it can be defined in a keymap file -} - -__attribute__ ((weak)) -bool process_action_user(keyrecord_t *record) { - // leave this function blank - it can be defined in a keymap file - return true; -} - -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - // leave this function blank - it can be defined in a keymap file -} - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_action_kb(keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_action_user(record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if (usb_led & (1< - -/* GH60 LEDs - * GPIO pads - * 0 F7 WASD LEDs - * 1 F6 ESC LED - * 2 F5 FN LED - * 3 F4 POKER Arrow LEDs - * B2 Capslock LED - * B0 not connected - */ -inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); } -inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); } -inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } -inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); } -inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); } - -inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); } -inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); } -inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } -inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); } -inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } - -/* GH60 keymap definition macro - * K2C, K31 and K3C are extra keys for ISO - */ -#define KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ -} - -/* ANSI valiant. No extra keys for ISO */ -#define KEYMAP_ANSI( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ - K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \ - K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \ -) - -#define KEYMAP_HHKB( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ - K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ -) - -void matrix_init_user(void); -void matrix_scan_user(void); -bool process_action_user(keyrecord_t *record); -void led_set_user(uint8_t usb_led); - -#endif diff --git a/keyboard/gh60_rev_c/gh60revc.jpg b/keyboard/gh60_rev_c/gh60revc.jpg deleted file mode 100644 index 6c88ad2442..0000000000 Binary files a/keyboard/gh60_rev_c/gh60revc.jpg and /dev/null differ diff --git a/keyboard/gh60_rev_c/keymaps/default.c b/keyboard/gh60_rev_c/keymaps/default.c deleted file mode 100644 index 3622be41b8..0000000000 --- a/keyboard/gh60_rev_c/keymaps/default.c +++ /dev/null @@ -1,69 +0,0 @@ -#include "gh60.h" -#include "action_layer.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: qwerty */ - KEYMAP( - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ - CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NO, ENT, \ - LSFT,FN1, Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, RSFT, \ - LCTL,LGUI,LALT, SPC, BSLS,RALT,RGUI,APP, RCTL), - /* 1: fn */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, \ - TRNS,TRNS,UP, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), - /* 2: arrows */ - KEYMAP( - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,UP, \ - TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,LEFT,DOWN,RGHT), -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay - [1] = ACTION_LAYER_TOGGLE(2), // toggle arrow overlay -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -void matrix_scan_user(void) { - -//Layer LED indicators - uint32_t layer = layer_state; - - if (layer & (1<<1)) { - gh60_wasd_leds_on(); - gh60_fn_led_on(); - } else { - gh60_wasd_leds_off(); - gh60_fn_led_off(); - } - - if (layer & (1<<2)) { - gh60_poker_leds_on(); - gh60_esc_led_on(); - } else { - gh60_poker_leds_off(); - gh60_esc_led_off(); - } - -}; diff --git a/keyboard/gh60_rev_c/pinout.txt b/keyboard/gh60_rev_c/pinout.txt deleted file mode 100644 index 3787f938e7..0000000000 --- a/keyboard/gh60_rev_c/pinout.txt +++ /dev/null @@ -1,18 +0,0 @@ - /* Column pin configuration - * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 - * pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) - */ - - /* Row pin configuration - * row: 0 1 2 3 4 - * pin: D0 D1 D2 D3 D5 - */ - - GPIO pads - 0 F7 WASD LEDs - 1 F6 ESC LED - 2 F5 FN LED - 3 F4 POKER Arrow LEDs - - B2 Capslock LED - B0 not connected \ No newline at end of file -- cgit v1.2.3