From 649b33d7783cf3021928534b7ae127e0a89e8807 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Tue, 21 Jun 2016 22:39:54 -0400 Subject: Renames keyboard folder to keyboards, adds couple of tmk's fixes (#432) * fixes from tmk's repo * rename keyboard to keyboards --- keyboard/ergodox_ez/keymaps/algernon/readme.md | 158 ------------------------- 1 file changed, 158 deletions(-) delete mode 100644 keyboard/ergodox_ez/keymaps/algernon/readme.md (limited to 'keyboard/ergodox_ez/keymaps/algernon/readme.md') diff --git a/keyboard/ergodox_ez/keymaps/algernon/readme.md b/keyboard/ergodox_ez/keymaps/algernon/readme.md deleted file mode 100644 index c9c481add2..0000000000 --- a/keyboard/ergodox_ez/keymaps/algernon/readme.md +++ /dev/null @@ -1,158 +0,0 @@ -algernon's layout -======================= - -This is an unconventional layout for the ErgoDox EZ. For more details about the -history of the layout, see my -[blog posts about my ErgoDox journey][blog-ergodox]. - - [blog-ergodox]: https://asylum.madhouse-project.org/blog/tags/ergodox/ - -Some of the things in the layout only work when one uses Spacemacs and GNOME -under Linux. Your mileage may vary. - -## Base layer - -[![Base layer](images/base-layer.png)](http://www.keyboard-layout-editor.com/#/gists/28f7eb305fdbff943613e1dc7aa9e82b) - -At its core, this is a Dvorak layout, with some minor changes (for example, `-` -being on the left half, and on the innermost key of the bottom row on the -right). The more interesting parts are how certain keys behave: - -* The keys on the number row double as function keys, when held for a bit longer - than an usual tap. This allows me to use the function keys without having to - switch layers. -* The `Shift`, `Alt`, and `Control` modifiers are one-shot. When tapped, they - are considered active for the next key press only. When double tapped, they - toggle on, until a third, single tap sometime later. When held, they act as - expected. My usual pattern is that I use these for the next keypress only, so - this behaviour is perfect. If I need them held, I'll just double-tap. -* The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, - which pops up an application selector. It also switches to a one-shot layer, - where the number row on the left half turns into app selector macros, for the - most common things I usually want to switch to. Otherwise it behaves as on a - normal layout. -* The `ESC` key also doubles as a one-shot cancel key: if tapped while any of - the one-shot modifiers are in-flight (as in, single-tapped, and not expired - yet), it cancels all one-shot modifiers. Otherwise it sends the usual keycode. -* The **Emacs** and **Hun** layer keys are one-shot, the **1Hand** and **STENO** - keys are toggles. -* The **Lead** key allows me to type in a sequence of keys, and trigger some - actions: - - `LEAD u` enters unicode input mode, by sending the GTK+ key sequence that - does this. - - `LEAD l` uses the unicode input method to enter a `λ`. - - `LEAD s` does a lot of magic to type in a shruggie: `¯\_(ツ)_/¯` - - `LEAD y` types `\o/`. - - `LEAD w m` maximises the currently focused window. - - `LEAD e` makes the [experimental layer](#experimental-layer) the default. - - `LEAD v` prints the firmware version, the keyboard and the keymap, if - compiled with a QMK version that has these available. - -## Hungarian layer - -[![Hungarian layer](images/hun-layer.png)](http://www.keyboard-layout-editor.com/#/gists/b160f6ec90d58c127c114c89f66e9dc9) - -On this layer, the accented characters are at the same position as their base -variant. For some, which can have other diatribes, the long one is on top, -short's on bottom. Tapping any of the accented characters takes us back to the -base layer. - -## Emacs layer - -[![Emacs layer](images/emacs-layer.png)](http://www.keyboard-layout-editor.com/#/gists/c59c453f9fe1a3238ba1494e7e5c6892) - -This layer is primarily for navigating text - and for some mousing and other -things, because there was space. Most of the keys should be pretty -self-explanatory, except for a few: - -* There are three keys on the bottom row of the left side, that change how some - of the other keys - explained just below - work. The keys are for *Emacs - mode* (the default), *Terminal mode*, and *Traditional mode*, respectively. -* The *Visual mode* key (the top big key on the left side) sends the `v` key in - *Emacs mode*, to enter Visual mode in Spacemacs. In all other modes, it is a - no-op. -* The *Copy/Cut* key (the bottom big key on the left side) sends the copy - command on tap, the cut one when held for longer than a normal tap. The **copy - command** is `y` in *Emacs mode*, `Ctrl-Shift-c` in *Terminal mode*, and - `Ctrl-c` in *Traditional mode*. The **cut command** is `x` in *Emacs mode*, - `Ctrl-Shift-x` in *Terminal Mode* and `Ctrl-x` in *Traditional mode*. -* The *Paste/Delete* key (the leftmost key on the left thumb cluster) sends the - paste command on tap, the delete one when held longer than a normal tap. The - **paste command** is `p` in *Emacs mode*, `Ctrl-Shift-v` in *Terminal mode*, - and `Ctrl-v` in *Traditional mode*. The **delete command** is `d` in *Emacs - mode*, and `DEL` in the other two. -* The `A`, `I` and `R` keys will - after sending themselves - clear the layer - back to the base layer. This allows a quick escape from the layer. - -## One-handed layer - -[![One-handed layer](images/one-handed-layer.png)](http://www.keyboard-layout-editor.com/#/gists/edff2495135955b8963198dace7f7ece) - -The one-handed layer is used in situations where the right hand is occupied, by -mousing around, for example. Tapping the `OTHER` key switches which side is -active. For the most part, keys remain in their usual position. When the right -half is active, keys are mirrored to the left half. - -The differences are as follows: - -* The `ESC` key has been moved to the bottom row, so the `OTHER` key is easier - to tap. -* Most keys on the thumb cluster now have dual uses, and these do not change - when switching sides: - - The `Space`/`Backspace` key sends `Space` on tap, `Backspace` when held - for longer than a normal tap. - - The `Enter`/`Shift` key sends `Enter` on short-tap, `Shift` on long-tap. -* The `Apps`/`BASE` key can be used to go back to the base layer, by - long-tapping it. A short-tap will send the `App` key, as usual. - -## Steno layer - -[![Steno layer for Plover](images/steno-layer.png)](http://www.keyboard-layout-editor.com/#/gists/401ef9a84369e47c57f9aedcf0a0d667) - -This is to be used with [Plover](http://www.openstenoproject.org/plover/), -nothing really fancy here. The **STENO** key toggles the layer on and off, and -sends the toggle command to Plover too. - -## Experimental layer - -[![Experimental layer](images/experimental-layer.png)](http://www.keyboard-layout-editor.com/#/gists/6ff50bf71248e05aab5b3fec4fae3d08) - -While using the standard Dvorak layout, I encountered a number of -inconveniences, and on this layer, I am playing with ideas to make the layout -feel better. Initially, it was based on [Capewell-Dvorak][cpd], but that too, -had shortcomings I was not happy with. So now this is something inbetween, with -own observations thrown in. How it works out in the long run remains to be seen. - - [cpd]: http://www.michaelcapewell.com/projects/keyboard/layout_capewell-dvorak.htm - -# Building - -To make my workflow easier, this layout is maintained in -[its own repository][algernon:ez-layout]. To build it, you will need the -[QMK][qmk] firmware checked out, and this repo either checked out, or symlinked -to `keyboard/ergodox_ez/algernon`. One way to achieve that is this: - - [algernon:ez-layout]: https://github.com/algernon/ergodox-layout - [qmk]: https://github.com/jackhumbert/qmk_firmware - -``` -$ git clone https://github.com/jackhumbert/qmk_firmware.git -$ cd qmk_firmware/keyboard/ergodox_ez -$ git clone https://github.com/algernon/ergodox-layout.git keymaps/algernon -$ make KEYMAP=algernon -``` - -From time to time, updates may be submitted back to the QMK repository. If you -are reading it there, you can build the firmware like any other firmware -included with it (assuming you are in the root directory of the firmware): - -``` -$ cd keyboard/ergodox_ez -$ make KEYMAP=algernon -``` - -# License - -The layout, being a derivative of the original TMK firmware which is under the -GPL-2+, this layout is under the GPL as well, but GPL-3+, rather than the older -version. -- cgit v1.2.3