From afb08462085132acf7a1962522952f7dbf064519 Mon Sep 17 00:00:00 2001
From: tmk <nobody@nowhere>
Date: Fri, 8 Jun 2012 00:37:46 +0900
Subject: Made directories for keyboard and converter projects.

---
 hhkb/Makefile.iwrap | 93 -----------------------------------------------------
 1 file changed, 93 deletions(-)
 delete mode 100644 hhkb/Makefile.iwrap

(limited to 'hhkb/Makefile.iwrap')

diff --git a/hhkb/Makefile.iwrap b/hhkb/Makefile.iwrap
deleted file mode 100644
index d922b0f501..0000000000
--- a/hhkb/Makefile.iwrap
+++ /dev/null
@@ -1,93 +0,0 @@
-#
-# Makefile for iWRAP
-#
-
-
-# Target file name (without extension).
-TARGET = hhkb_iwrap
-
-# Directory common source filess exist
-TOP_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =	main.c \
-	keymap.c \
-	matrix.c \
-	led.c
-
-CONFIG_H = config_iwrap.h
-
-
-# V-USB debug level: To use ps2_usart.c level must be 0
-# ps2_usart.c requires USART to receive PS/2 signal.
-OPT_DEFS = -DDEBUG_LEVEL=0
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-MCU = atmega168p
-# avrdude doesn't know atmega168p
-AVRDUDE_MCU = atmega168
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 12000000
-
-
-# Build Options
-#   comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-#NKRO_ENABLE = yes	# USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-AVRDUDE = avrdude
-# Type: avrdude -c ? to get a full listing.
-AVRDUDE_PROGRAMMER = usbasp
-AVRDUDE_PORT =
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level.  Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-#AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
-
-# Search Path
-VPATH = $(TARGET_DIR)
-
-include $(TOP_DIR)/protocol/iwrap.mk
-# To be swatchable btween Bluetooth and USB. Comment out if you don't need USB.
-include $(TOP_DIR)/protocol/vusb.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
-- 
cgit v1.2.3