From e4d2ba9a4d98a8ff7327156ff45cc6339cb40c95 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Mon, 7 Nov 2022 02:43:53 +0000 Subject: Align haptic feedback keycode names (#18964) --- docs/feature_haptic_feedback.md | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'docs') diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index f4546b6914..b456bad736 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -32,21 +32,21 @@ The following `config.h` settings are available for all types of haptic feedback Not all keycodes below will work depending on which haptic mechanism you have chosen. -| Name | Description | -|-----------|-------------------------------------------------------| -|`HPT_ON` | Turn haptic feedback on | -|`HPT_OFF` | Turn haptic feedback off | -|`HPT_TOG` | Toggle haptic feedback on/off | -|`HPT_RST` | Reset haptic feedback config to default | -|`HPT_FBK` | Toggle feedback to occur on keypress, release or both | -|`HPT_BUZ` | Toggle solenoid buzz on/off | -|`HPT_MODI` | Go to next DRV2605L waveform | -|`HPT_MODD` | Go to previous DRV2605L waveform | -|`HPT_CONT` | Toggle continuous haptic mode on/off | -|`HPT_CONI` | Increase DRV2605L continous haptic strength | -|`HPT_COND` | Decrease DRV2605L continous haptic strength | -|`HPT_DWLI` | Increase Solenoid dwell time | -|`HPT_DWLD` | Decrease Solenoid dwell time | +| Key | Aliases | Description | +|-----------------------------|---------|-------------------------------------------------------| +|`QK_HAPTIC_ON` |`HF_ON` | Turn haptic feedback on | +|`QK_HAPTIC_OFF` |`HF_OFF` | Turn haptic feedback off | +|`QK_HAPTIC_TOGGLE` |`HF_TOGG`| Toggle haptic feedback on/off | +|`QK_HAPTIC_RESET` |`HF_RST` | Reset haptic feedback config to default | +|`QK_HAPTIC_FEEDBACK_TOGGLE` |`HF_FDBK`| Toggle feedback to occur on keypress, release or both | +|`QK_HAPTIC_BUZZ_TOGGLE` |`HF_BUZZ`| Toggle solenoid buzz on/off | +|`QK_HAPTIC_MODE_NEXT` |`HF_NEXT`| Go to next DRV2605L waveform | +|`QK_HAPTIC_MODE_PREVIOUS` |`HF_PREV`| Go to previous DRV2605L waveform | +|`QK_HAPTIC_CONTINUOUS_TOGGLE`|`HF_CONT`| Toggle continuous haptic mode on/off | +|`QK_HAPTIC_CONTINUOUS_UP` |`HF_CONU`| Increase DRV2605L continous haptic strength | +|`QK_HAPTIC_CONTINUOUS_DOWN` |`HF_COND`| Decrease DRV2605L continous haptic strength | +|`QK_HAPTIC_DWELL_UP` |`HF_DWLU`| Increase Solenoid dwell time | +|`QK_HAPTIC_DWELL_DOWN` |`HF_DWLD`| Decrease Solenoid dwell time | ### Solenoids @@ -68,8 +68,8 @@ For relay switches, the hardware may already contain all of that ciruitry, and j |`SOLENOID_DEFAULT_DWELL` | `12` ms |Configures the default dwell time for the switch. | |`SOLENOID_MIN_DWELL` | `4` ms |Sets the lower limit for the dwell. | |`SOLENOID_MAX_DWELL` | `100` ms |Sets the upper limit for the dwell. | -|`SOLENOID_DWELL_STEP_SIZE` | `1` ms |The step size to use when `HPT_DWL*` keycodes are sent. | -|`SOLENOID_DEFAULT_BUZZ` | `0` (disabled) |On HPT_RST buzz is set "on" if this is "1" | +|`SOLENOID_DWELL_STEP_SIZE` | `1` ms |The step size to use when `HF_DWL*` keycodes are sent. | +|`SOLENOID_DEFAULT_BUZZ` | `0` (disabled) |On `HF_RST` buzz is set "on" if this is "1" | |`SOLENOID_BUZZ_ACTUATED` | `SOLENOID_MIN_DWELL` |Actuated-time when the switch is in buzz mode. | |`SOLENOID_BUZZ_NONACTUATED` | `SOLENOID_MIN_DWELL` |Non-Actuated-time when the switch is in buzz mode. | @@ -178,7 +178,7 @@ If haptic feedback is enabled, the keyboard will vibrate to a specific sequence ``` #define DRV_MODE_DEFAULT *sequence name or number* ``` -This will set what sequence HPT_RST will set as the active mode. If not defined, mode will be set to 1 when HPT_RST is pressed. +This will set what sequence `HF_RST` will set as the active mode. If not defined, mode will be set to 1 when `HF_RST` is pressed. ### DRV2605L Continuous Haptic Mode -- cgit v1.2.3