From 19b70b2737517b08beebe28ad5b2d084c9f59bf3 Mon Sep 17 00:00:00 2001 From: Ryan Date: Fri, 17 Jul 2020 03:01:34 +1000 Subject: MSYS2: Switch to bootloadHID package and bring back avrdude package (#9736) * MSYS2: Switch to bootloadHID package and bring back avrdude package * Update Zadig docs as well --- docs/driver_installation_zadig.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/driver_installation_zadig.md b/docs/driver_installation_zadig.md index b04a6fbef1..403b78da0c 100644 --- a/docs/driver_installation_zadig.md +++ b/docs/driver_installation_zadig.md @@ -23,7 +23,7 @@ Zadig will automatically detect the bootloader device. You may sometimes need to !> If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is probably not in bootloader mode. The arrow will be colored orange and you will be asked to confirm modifying a system driver. **Do not** proceed if this is the case! -If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. For flashing a USBaspLoader device via command line with msys2, the `libusbk` driver is recommended, otherwise `libusb-win32` will work fine if you are using QMK Toolbox for flashing. +If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. USBAspLoader devices must use the `libusbK` driver. ![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png) -- cgit v1.2.3