From 06aea834c420d5c11bbcf64d37596cb0cee9af98 Mon Sep 17 00:00:00 2001 From: Ryan Date: Thu, 27 May 2021 15:21:15 +1000 Subject: Backlight: add defines for default level and breathing state (#12560) --- docs/feature_backlight.md | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'docs/feature_backlight.md') diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index 74511dd43f..d47ecc6824 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -62,15 +62,17 @@ Valid driver values are `pwm`, `software`, `custom` or `no`. See below for help To configure the backlighting, `#define` these in your `config.h`: -| Define | Default | Description | -|------------------------|---------------|-------------------------------------------------------------------------------------------------------------------| -| `BACKLIGHT_PIN` | *Not defined* | The pin that controls the LED(s) | -| `BACKLIGHT_LEVELS` | `3` | The number of brightness levels (maximum 31 excluding off) | -| `BACKLIGHT_CAPS_LOCK` | *Not defined* | Enable Caps Lock indicator using backlight (for keyboards without dedicated LED) | -| `BACKLIGHT_BREATHING` | *Not defined* | Enable backlight breathing, if supported | -| `BREATHING_PERIOD` | `6` | The length of one backlight "breath" in seconds | -| `BACKLIGHT_ON_STATE` | `1` | The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low | -| `BACKLIGHT_LIMIT_VAL ` | `255` | The maximum duty cycle of the backlight -- `255` allows for full brightness, any lower will decrease the maximum. | +|Define |Default |Description | +|-----------------------------|------------------|-----------------------------------------------------------------------------------------------------------------| +|`BACKLIGHT_PIN` |*Not defined* |The pin that controls the LED(s) | +|`BACKLIGHT_LEVELS` |`3` |The number of brightness levels (maximum 31 excluding off) | +|`BACKLIGHT_CAPS_LOCK` |*Not defined* |Enable Caps Lock indicator using backlight (for keyboards without dedicated LED) | +|`BACKLIGHT_BREATHING` |*Not defined* |Enable backlight breathing, if supported | +|`BREATHING_PERIOD` |`6` |The length of one backlight "breath" in seconds | +|`BACKLIGHT_ON_STATE` |`1` |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low | +|`BACKLIGHT_LIMIT_VAL` |`255` |The maximum duty cycle of the backlight -- `255` allows for full brightness, any lower will decrease the maximum.| +|`BACKLIGHT_DEFAULT_LEVEL` |`BACKLIGHT_LEVELS`|The default backlight level to use upon clearing the EEPROM | +|`BACKLIGHT_DEFAULT_BREATHING`|*Not defined* |Whether to enable backlight breathing upon clearing the EEPROM | Unless you are designing your own keyboard, you generally should not need to change the `BACKLIGHT_PIN` or `BACKLIGHT_ON_STATE`. -- cgit v1.2.3