From 2721022078c30dd00c1063e4a2f8199b2b53e0d5 Mon Sep 17 00:00:00 2001 From: tmk Date: Tue, 23 Jul 2013 10:56:03 +0900 Subject: Add mechanical locking switch support for NumLock and ScrollLock --- converter/adb_usb/README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'converter/adb_usb/README.md') diff --git a/converter/adb_usb/README.md b/converter/adb_usb/README.md index 3033cfa620..5301557d43 100644 --- a/converter/adb_usb/README.md +++ b/converter/adb_usb/README.md @@ -9,10 +9,10 @@ Discuss: http://geekhack.org/showwiki.php?title=Island:14290 Build ----- -0. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data). By default Data line uses port F0. +0. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data). By default Data line uses port D0. This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable. The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended. -1. Define following macros for ADB connection in config.h if you use other than port F0. +1. Define following macros for ADB connection in config.h if you use other than port D0. ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT 2. make 3. program Teensy -- cgit v1.2.3