From b4f163864333a30d67323fd61c03d1d88380c405 Mon Sep 17 00:00:00 2001 From: tmk Date: Wed, 6 May 2015 10:12:46 +0900 Subject: Updated FAQ (markdown) --- FAQ.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'FAQ.md') diff --git a/FAQ.md b/FAQ.md index 39de3b5ef0..1e9c017b6d 100644 --- a/FAQ.md +++ b/FAQ.md @@ -53,7 +53,7 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666" # Miscellaneous ## NKRO Doesn't work -First you have to compile frimware with this build option `NKRO_ENABLE` in `Makefile`. +First you have to compile frimware with this build option `NKRO_ENABLE` in **Makefile**. Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work you need to switch to **6KRO** mode, in particular when you are in BIOS. @@ -106,7 +106,7 @@ http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf ## Bootloader jump doesn't work -Properly configure bootloader size in Makefile. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**. +Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**. ``` # Size of Bootloaders in bytes: # Atmel DFU loader(ATmega32U4) 4096 -- cgit v1.2.3