From b56707a5177489b01ad0b79b4ef0be80c8573d23 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Tue, 1 Feb 2022 10:07:33 +0800 Subject: [Keyboard] Simplify handedness for cradio (#16147) --- keyboards/cradio/config.h | 3 --- keyboards/cradio/readme.md | 33 ++------------------------------- 2 files changed, 2 insertions(+), 34 deletions(-) diff --git a/keyboards/cradio/config.h b/keyboards/cradio/config.h index 37c329a244..aba6050af1 100644 --- a/keyboards/cradio/config.h +++ b/keyboards/cradio/config.h @@ -67,9 +67,6 @@ /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D2 -/* Split handedness */ -#define EE_HANDS - /* Top left key on left half */ #define BOOTMAGIC_LITE_ROW 0 #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/cradio/readme.md b/keyboards/cradio/readme.md index c6013006d4..7f3cef0969 100644 --- a/keyboards/cradio/readme.md +++ b/keyboards/cradio/readme.md @@ -20,40 +20,11 @@ Make example for this keyboard (after setting up your build environment): See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -## Setting Handedness - -Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are: - - make cradio:default:dfu-split-left - make cradio:default:dfu-split-right - -[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand - ## Bootloader Enter the bootloader in 3 ways: -* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side. -* **Physical reset button**: Briefly press the reset button soldered on the PCB. * **Keycode in layout**: Press the key mapped to `RESET` if it is configured. - -## Swapped Pins - -If you have one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware: -```c -#undef DIRECT_PINS -#define DIRECT_PINS { \ - { D7, F7, F6, F5, F4 }, \ - { B1, B3, B2, B6, D3 }, \ - { D1, D0, D4, C6, E6 }, \ - { B4, B5, NO_PIN, NO_PIN, NO_PIN } \ -} -#undef DIRECT_PINS_RIGHT -#define DIRECT_PINS_RIGHT { \ - { F4, F5, F6, F7, D7 }, \ - { D3, B6, B2, B3, B1 }, \ - { E6, C6, D4, D0, D1 }, \ - { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ -} -``` +* **Physical reset button**: Briefly press the reset button soldered on the PCB. +* **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side. -- cgit v1.2.3