From ab0db3c52dacb1481e249b47e0cc986e225028ad Mon Sep 17 00:00:00 2001 From: Barry Huang Date: Mon, 14 May 2018 00:30:10 +0800 Subject: Play Keyboard60 PCB upload (#2953) * Play Keyboard60 PCB pk60 PCB files upload * Add readme files for pk60 * error solving * uneeded question marks removed --- keyboards/pk60/config.h | 58 +++++++++++++++++++++++++++++++ keyboards/pk60/keymaps/default/keymap.c | 59 ++++++++++++++++++++++++++++++++ keyboards/pk60/keymaps/default/readme.md | 3 ++ keyboards/pk60/pk60.c | 1 + keyboards/pk60/pk60.h | 20 +++++++++++ keyboards/pk60/readme.md | 11 ++++++ keyboards/pk60/rules.mk | 56 ++++++++++++++++++++++++++++++ 7 files changed, 208 insertions(+) create mode 100644 keyboards/pk60/config.h create mode 100644 keyboards/pk60/keymaps/default/keymap.c create mode 100644 keyboards/pk60/keymaps/default/readme.md create mode 100644 keyboards/pk60/pk60.c create mode 100644 keyboards/pk60/pk60.h create mode 100644 keyboards/pk60/readme.md create mode 100644 keyboards/pk60/rules.mk diff --git a/keyboards/pk60/config.h b/keyboards/pk60/config.h new file mode 100644 index 0000000000..06101349cc --- /dev/null +++ b/keyboards/pk60/config.h @@ -0,0 +1,58 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Play Keyboard +#define PRODUCT pk60 +#define DESCRIPTION A 60% keyboard PCB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, F7, B5, B4, D7, D6, B3, B2 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ +#define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 5 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif \ No newline at end of file diff --git a/keyboards/pk60/keymaps/default/keymap.c b/keyboards/pk60/keymaps/default/keymap.c new file mode 100644 index 0000000000..dce4600a53 --- /dev/null +++ b/keyboards/pk60/keymaps/default/keymap.c @@ -0,0 +1,59 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, MO(1), KC_RALT, MO(1), KC_NO, KC_APP, KC_RCTL), + + LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, + RESET, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_PSCR, KC_CALC, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_SLCK, KC_TRNS, + KC_TRNS, KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + DDRF |= (1 << 4); PORTF &= ~(1 << 4); + } else { + DDRF &= ~(1 << 4); PORTF &= ~(1 << 4); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} \ No newline at end of file diff --git a/keyboards/pk60/keymaps/default/readme.md b/keyboards/pk60/keymaps/default/readme.md new file mode 100644 index 0000000000..911cb37c59 --- /dev/null +++ b/keyboards/pk60/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# Default Play Keyboard60 Layout + +This is the default layout that comes flashed on every Play Keyboard60. All key pins are shown in the file. \ No newline at end of file diff --git a/keyboards/pk60/pk60.c b/keyboards/pk60/pk60.c new file mode 100644 index 0000000000..909230def2 --- /dev/null +++ b/keyboards/pk60/pk60.c @@ -0,0 +1 @@ +#include "pk60.h" diff --git a/keyboards/pk60/pk60.h b/keyboards/pk60/pk60.h new file mode 100644 index 0000000000..6930423945 --- /dev/null +++ b/keyboards/pk60/pk60.h @@ -0,0 +1,20 @@ +#ifndef pk60_H +#define pk60_H + +#include "quantum.h" + +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ + K400, K401, K402, K403, K407, K408, K409, K410, K411, K412, K413 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, K403, KC_NO, KC_NO, KC_NO, K407, K408, K409, K410, K411, K412, K413, KC_NO } \ +} + +#endif \ No newline at end of file diff --git a/keyboards/pk60/readme.md b/keyboards/pk60/readme.md new file mode 100644 index 0000000000..376a544cbe --- /dev/null +++ b/keyboards/pk60/readme.md @@ -0,0 +1,11 @@ +# Play Keyboard60 + +![Play Keyboard60](https://i.imgur.com/3pvC6I4.png) + +A 60% keyboard PCB made and sold by Play Keyboard. + +Keyboard Maintainer: [Barry Huang](https://github.com/yj7272098) +Hardware Supported: Play Keyboard60 +Hardware Availability: [Play Keyboard](http://playkeyboard.qdm.com.tw/) + +Powered by QMK Firmware. \ No newline at end of file diff --git a/keyboards/pk60/rules.mk b/keyboards/pk60/rules.mk new file mode 100644 index 0000000000..cf3f54c714 --- /dev/null +++ b/keyboards/pk60/rules.mk @@ -0,0 +1,56 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +BOOTLOADER=amtel-dfu + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = yes \ No newline at end of file -- cgit v1.2.3