From 383fae55c5d53626eda210298f15fa6810510d5e Mon Sep 17 00:00:00 2001 From: Liyang HU Date: Sat, 7 Aug 2021 08:12:57 +0100 Subject: Refactor `quantum/command.{c,h}` for code size & {read,maintain}ability (#11842) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * quantum/command.c: coalesce `print()`s in `command_common_help()` & `print_version()` Also undo some damage by clang-format in b624f32f94 * quantum/command.c: replace `print(…); print_{,val_}{dec,hex}*(…);` sequences with single `xprintf(…)` `print_{dec,hex}*(…)` are just `#define`s for `xprintf(…)` anyway. Each additional `xprintf(…)` costs ~8 bytes: the call instructions, plus an additional NUL terminator. This _really_ adds up: this commit saves 814 bytes on my ATmega32. * quantum/command.c: optimise `mousekey_console()` for size & legibility Made various tweaks to the interface, but still functionally identical. Assume `KC_1`…`KC_0` to be contiguous, and removed `numkey2num(…)` entirely. It was exported in `command.h` by 1a0bac8bcc for no obvious reason, before which it was `static`. I doubt anyone uses it. `mousekey_console()` is now enabled regardless of `MK_3_SPEED`. Needs fleshing out for things other than the X11 variant though. This commit saves 638 bytes on my ATmega32. --- quantum/command.c | 591 +++++++++++++++++++++++++----------------------------- quantum/command.h | 3 +- 2 files changed, 277 insertions(+), 317 deletions(-) diff --git a/quantum/command.c b/quantum/command.c index 3a7dc0f8ca..2ff640a7bc 100644 --- a/quantum/command.c +++ b/quantum/command.c @@ -55,7 +55,6 @@ static bool command_console(uint8_t code); static void command_console_help(void); #if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED) static bool mousekey_console(uint8_t code); -static void mousekey_console_help(void); #endif static void switch_default_layer(uint8_t layer); @@ -103,190 +102,220 @@ bool command_console_extra(uint8_t code) { /*********************************************************** * Command common ***********************************************************/ + static void command_common_help(void) { - print("\n\t- Magic -\n" STR(MAGIC_KEY_DEBUG) ": Debug Message Toggle\n" STR(MAGIC_KEY_DEBUG_MATRIX) ": Matrix Debug Mode Toggle - Show keypresses in matrix grid\n" STR(MAGIC_KEY_DEBUG_KBD) ": Keyboard Debug Toggle - Show keypress report\n" STR(MAGIC_KEY_DEBUG_MOUSE) ": Debug Mouse Toggle\n" STR(MAGIC_KEY_VERSION) ": Version\n" STR(MAGIC_KEY_STATUS) ": Status\n" STR(MAGIC_KEY_CONSOLE) ": Activate Console Mode\n" + print(/* clang-format off */ + "\n\t- Magic -\n" + + STR(MAGIC_KEY_DEBUG) ": Debug Message Toggle\n" + STR(MAGIC_KEY_DEBUG_MATRIX) ": Matrix Debug Mode Toggle" + " - Show keypresses in matrix grid\n" + STR(MAGIC_KEY_DEBUG_KBD) ": Keyboard Debug Toggle" + " - Show keypress report\n" + STR(MAGIC_KEY_DEBUG_MOUSE) ": Debug Mouse Toggle\n" + STR(MAGIC_KEY_VERSION) ": Version\n" + STR(MAGIC_KEY_STATUS) ": Status\n" + STR(MAGIC_KEY_CONSOLE) ": Activate Console Mode\n" #if MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM - STR(MAGIC_KEY_LAYER0) ": Switch to Layer 0\n" STR(MAGIC_KEY_LAYER1) ": Switch to Layer 1\n" STR(MAGIC_KEY_LAYER2) ": Switch to Layer 2\n" STR(MAGIC_KEY_LAYER3) ": Switch to Layer 3\n" STR(MAGIC_KEY_LAYER4) ": Switch to Layer 4\n" STR(MAGIC_KEY_LAYER5) ": Switch to Layer 5\n" STR(MAGIC_KEY_LAYER6) ": Switch to Layer 6\n" STR(MAGIC_KEY_LAYER7) ": Switch to Layer 7\n" STR(MAGIC_KEY_LAYER8) ": Switch to Layer 8\n" STR(MAGIC_KEY_LAYER9) ": Switch to Layer 9\n" + STR(MAGIC_KEY_LAYER0) ": Switch to Layer 0\n" + STR(MAGIC_KEY_LAYER1) ": Switch to Layer 1\n" + STR(MAGIC_KEY_LAYER2) ": Switch to Layer 2\n" + STR(MAGIC_KEY_LAYER3) ": Switch to Layer 3\n" + STR(MAGIC_KEY_LAYER4) ": Switch to Layer 4\n" + STR(MAGIC_KEY_LAYER5) ": Switch to Layer 5\n" + STR(MAGIC_KEY_LAYER6) ": Switch to Layer 6\n" + STR(MAGIC_KEY_LAYER7) ": Switch to Layer 7\n" + STR(MAGIC_KEY_LAYER8) ": Switch to Layer 8\n" + STR(MAGIC_KEY_LAYER9) ": Switch to Layer 9\n" #endif #if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS - "F1-F10: Switch to Layer 0-9 (F10 = L0)\n" + "F1-F10: Switch to Layer 0-9 (F10 = L0)\n" #endif #if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS - "0-9: Switch to Layer 0-9\n" + "0-9: Switch to Layer 0-9\n" #endif - STR(MAGIC_KEY_LAYER0_ALT) ": Switch to Layer 0 (alternate)\n" + STR(MAGIC_KEY_LAYER0_ALT) ": Switch to Layer 0 (alternate)\n" - STR(MAGIC_KEY_BOOTLOADER) ": Jump to Bootloader\n" STR(MAGIC_KEY_BOOTLOADER_ALT) ": Jump to Bootloader (alternate)\n" + STR(MAGIC_KEY_BOOTLOADER) ": Jump to Bootloader\n" + STR(MAGIC_KEY_BOOTLOADER_ALT) ": Jump to Bootloader (alternate)\n" #ifdef KEYBOARD_LOCK_ENABLE - STR(MAGIC_KEY_LOCK) ": Lock Keyboard\n" + STR(MAGIC_KEY_LOCK) ": Lock Keyboard\n" #endif - STR(MAGIC_KEY_EEPROM) ": Print EEPROM Settings\n" STR(MAGIC_KEY_EEPROM_CLEAR) ": Clear EEPROM\n" + STR(MAGIC_KEY_EEPROM) ": Print EEPROM Settings\n" + STR(MAGIC_KEY_EEPROM_CLEAR) ": Clear EEPROM\n" #ifdef NKRO_ENABLE - STR(MAGIC_KEY_NKRO) ": NKRO Toggle\n" + STR(MAGIC_KEY_NKRO) ": NKRO Toggle\n" #endif #ifdef SLEEP_LED_ENABLE - STR(MAGIC_KEY_SLEEP_LED) ": Sleep LED Test\n" + STR(MAGIC_KEY_SLEEP_LED) ": Sleep LED Test\n" #endif - ); + ); /* clang-format on */ } static void print_version(void) { - // print version & information - print("\n\t- Version -\n"); - print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") " - "PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") " - "VER: " STR(DEVICE_VER) "\n"); - print("BUILD: (" __DATE__ ")\n"); + print(/* clang-format off */ + "\n\t- Version -\n" + "VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") " + "PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") " + "VER: " STR(DEVICE_VER) "\n" + "BUILD: (" __DATE__ ")\n" #ifndef SKIP_VERSION # ifdef PROTOCOL_CHIBIOS - print("CHIBIOS: " STR(CHIBIOS_VERSION) ", CONTRIB: " STR(CHIBIOS_CONTRIB_VERSION) "\n"); + "CHIBIOS: " STR(CHIBIOS_VERSION) + ", CONTRIB: " STR(CHIBIOS_CONTRIB_VERSION) "\n" # endif #endif /* build options */ - print("OPTIONS:" + "OPTIONS:" #ifdef PROTOCOL_LUFA - " LUFA" + " LUFA" #endif #ifdef PROTOCOL_VUSB - " VUSB" + " VUSB" #endif #ifdef BOOTMAGIC_ENABLE - " BOOTMAGIC" + " BOOTMAGIC" #endif #ifdef MOUSEKEY_ENABLE - " MOUSEKEY" + " MOUSEKEY" #endif #ifdef EXTRAKEY_ENABLE - " EXTRAKEY" + " EXTRAKEY" #endif #ifdef CONSOLE_ENABLE - " CONSOLE" + " CONSOLE" #endif #ifdef COMMAND_ENABLE - " COMMAND" + " COMMAND" #endif #ifdef NKRO_ENABLE - " NKRO" + " NKRO" #endif #ifdef LTO_ENABLE - " LTO" + " LTO" #endif - " " STR(BOOTLOADER_SIZE) "\n"); + " " STR(BOOTLOADER_SIZE) "\n" - print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__) + "GCC: " STR(__GNUC__) + "." STR(__GNUC_MINOR__) + "." STR(__GNUC_PATCHLEVEL__) #if defined(__AVR__) - " AVR-LIBC: " __AVR_LIBC_VERSION_STRING__ " AVR_ARCH: avr" STR(__AVR_ARCH__) + " AVR-LIBC: " __AVR_LIBC_VERSION_STRING__ + " AVR_ARCH: avr" STR(__AVR_ARCH__) #endif - "\n"); - - return; + "\n" + ); /* clang-format on */ } static void print_status(void) { - print("\n\t- Status -\n"); + xprintf(/* clang-format off */ + "\n\t- Status -\n" + + "host_keyboard_leds(): %02X\n" +#ifndef PROTOCOL_VUSB + "keyboard_protocol: %02X\n" + "keyboard_idle: %02X\n" +#endif +#ifdef NKRO_ENABLE + "keymap_config.nkro: %02X\n" +#endif + "timer_read32(): %08lX\n" - print_val_hex8(host_keyboard_leds()); + , host_keyboard_leds() #ifndef PROTOCOL_VUSB - // these aren't set on the V-USB protocol, so we just ignore them for now - print_val_hex8(keyboard_protocol); - print_val_hex8(keyboard_idle); + /* these aren't set on the V-USB protocol, so we just ignore them for now */ + , keyboard_protocol + , keyboard_idle #endif #ifdef NKRO_ENABLE - print_val_hex8(keymap_config.nkro); + , keymap_config.nkro #endif - print_val_hex32(timer_read32()); - return; + , timer_read32() + + ); /* clang-format on */ } -static void print_eeconfig(void) { -// Print these variables if NO_PRINT or USER_PRINT are not defined. #if !defined(NO_PRINT) && !defined(USER_PRINT) - - print("default_layer: "); - print_dec(eeconfig_read_default_layer()); - print("\n"); +static void print_eeconfig(void) { + xprintf("eeconfig:\ndefault_layer: %u\n", eeconfig_read_default_layer()); debug_config_t dc; dc.raw = eeconfig_read_debug(); - print("debug_config.raw: "); - print_hex8(dc.raw); - print("\n"); - print(".enable: "); - print_dec(dc.enable); - print("\n"); - print(".matrix: "); - print_dec(dc.matrix); - print("\n"); - print(".keyboard: "); - print_dec(dc.keyboard); - print("\n"); - print(".mouse: "); - print_dec(dc.mouse); - print("\n"); + xprintf(/* clang-format off */ + + "debug_config.raw: %02X\n" + ".enable: %u\n" + ".matrix: %u\n" + ".keyboard: %u\n" + ".mouse: %u\n" + + , dc.raw + , dc.enable + , dc.matrix + , dc.keyboard + , dc.mouse + ); /* clang-format on */ keymap_config_t kc; kc.raw = eeconfig_read_keymap(); - print("keymap_config.raw: "); - print_hex8(kc.raw); - print("\n"); - print(".swap_control_capslock: "); - print_dec(kc.swap_control_capslock); - print("\n"); - print(".capslock_to_control: "); - print_dec(kc.capslock_to_control); - print("\n"); - print(".swap_lctl_lgui: "); - print_dec(kc.swap_lctl_lgui); - print("\n"); - print(".swap_rctl_rgui: "); - print_dec(kc.swap_rctl_rgui); - print("\n"); - print(".swap_lalt_lgui: "); - print_dec(kc.swap_lalt_lgui); - print("\n"); - print(".swap_ralt_rgui: "); - print_dec(kc.swap_ralt_rgui); - print("\n"); - print(".no_gui: "); - print_dec(kc.no_gui); - print("\n"); - print(".swap_grave_esc: "); - print_dec(kc.swap_grave_esc); - print("\n"); - print(".swap_backslash_backspace: "); - print_dec(kc.swap_backslash_backspace); - print("\n"); - print(".nkro: "); - print_dec(kc.nkro); - print("\n"); + xprintf(/* clang-format off */ + + "keymap_config.raw: %02X\n" + ".swap_control_capslock: %u\n" + ".capslock_to_control: %u\n" + ".swap_lctl_lgui: %u\n" + ".swap_rctl_rgui: %u\n" + ".swap_lalt_lgui: %u\n" + ".swap_ralt_rgui: %u\n" + ".no_gui: %u\n" + ".swap_grave_esc: %u\n" + ".swap_backslash_backspace: %u\n" + ".nkro: %u\n" + + , kc.raw + , kc.swap_control_capslock + , kc.capslock_to_control + , kc.swap_lctl_lgui + , kc.swap_rctl_rgui + , kc.swap_lalt_lgui + , kc.swap_ralt_rgui + , kc.no_gui + , kc.swap_grave_esc + , kc.swap_backslash_backspace + , kc.nkro + ); /* clang-format on */ # ifdef BACKLIGHT_ENABLE + backlight_config_t bc; bc.raw = eeconfig_read_backlight(); - print("backlight_config.raw: "); - print_hex8(bc.raw); - print("\n"); - print(".enable: "); - print_dec(bc.enable); - print("\n"); - print(".level: "); - print_dec(bc.level); - print("\n"); -# endif /* BACKLIGHT_ENABLE */ + xprintf(/* clang-format off */ + "backlight_config" + + ".raw: %02X\n" + ".enable: %u\n" + ".level: %u\n" + + , bc.raw + , bc.enable + , bc.level -#endif /* !NO_PRINT */ + ); /* clang-format on */ + +# endif /* BACKLIGHT_ENABLE */ } +#endif /* !NO_PRINT && !USER_PRINT */ static bool command_common(uint8_t code) { #ifdef KEYBOARD_LOCK_ENABLE @@ -306,8 +335,9 @@ static bool command_common(uint8_t code) { // print stored eeprom config case MAGIC_KC(MAGIC_KEY_EEPROM): - print("eeconfig:\n"); +#if !defined(NO_PRINT) && !defined(USER_PRINT) print_eeconfig(); +#endif /* !NO_PRINT && !USER_PRINT */ break; // clear eeprom @@ -519,265 +549,196 @@ static bool command_console(uint8_t code) { case KC_H: case KC_SLASH: /* ? */ command_console_help(); - break; + print("C> "); + return true; case KC_Q: case KC_ESC: command_state = ONESHOT; return false; -#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED) +#if defined(MOUSEKEY_ENABLE) case KC_M: - mousekey_console_help(); - print("M> "); command_state = MOUSEKEY; + mousekey_console(KC_SLASH /* ? */); return true; #endif default: print("?"); return false; } - print("C> "); - return true; } -#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED) /*********************************************************** * Mousekey console ***********************************************************/ -static uint8_t mousekey_param = 0; - -static void mousekey_param_print(void) { -// Print these variables if NO_PRINT or USER_PRINT are not defined. -# if !defined(NO_PRINT) && !defined(USER_PRINT) - print("\n\t- Values -\n"); - print("1: delay(*10ms): "); - print_dec(mk_delay); - print("\n"); - print("2: interval(ms): "); - print_dec(mk_interval); - print("\n"); - print("3: max_speed: "); - print_dec(mk_max_speed); - print("\n"); - print("4: time_to_max: "); - print_dec(mk_time_to_max); - print("\n"); - print("5: wheel_max_speed: "); - print_dec(mk_wheel_max_speed); - print("\n"); - print("6: wheel_time_to_max: "); - print_dec(mk_wheel_time_to_max); - print("\n"); -# endif /* !NO_PRINT */ -} -//#define PRINT_SET_VAL(v) print(#v " = "); print_dec(v); print("\n"); -# define PRINT_SET_VAL(v) xprintf(# v " = %d\n", (v)) -static void mousekey_param_inc(uint8_t param, uint8_t inc) { - switch (param) { - case 1: - if (mk_delay + inc < UINT8_MAX) - mk_delay += inc; - else - mk_delay = UINT8_MAX; - PRINT_SET_VAL(mk_delay); - break; - case 2: - if (mk_interval + inc < UINT8_MAX) - mk_interval += inc; - else - mk_interval = UINT8_MAX; - PRINT_SET_VAL(mk_interval); - break; - case 3: - if (mk_max_speed + inc < UINT8_MAX) - mk_max_speed += inc; - else - mk_max_speed = UINT8_MAX; - PRINT_SET_VAL(mk_max_speed); - break; - case 4: - if (mk_time_to_max + inc < UINT8_MAX) - mk_time_to_max += inc; - else - mk_time_to_max = UINT8_MAX; - PRINT_SET_VAL(mk_time_to_max); - break; - case 5: - if (mk_wheel_max_speed + inc < UINT8_MAX) - mk_wheel_max_speed += inc; - else - mk_wheel_max_speed = UINT8_MAX; - PRINT_SET_VAL(mk_wheel_max_speed); - break; - case 6: - if (mk_wheel_time_to_max + inc < UINT8_MAX) - mk_wheel_time_to_max += inc; - else - mk_wheel_time_to_max = UINT8_MAX; - PRINT_SET_VAL(mk_wheel_time_to_max); - break; - } -} +#if defined(MOUSEKEY_ENABLE) -static void mousekey_param_dec(uint8_t param, uint8_t dec) { - switch (param) { - case 1: - if (mk_delay > dec) - mk_delay -= dec; - else - mk_delay = 0; - PRINT_SET_VAL(mk_delay); - break; - case 2: - if (mk_interval > dec) - mk_interval -= dec; - else - mk_interval = 0; - PRINT_SET_VAL(mk_interval); - break; - case 3: - if (mk_max_speed > dec) - mk_max_speed -= dec; - else - mk_max_speed = 0; - PRINT_SET_VAL(mk_max_speed); - break; - case 4: - if (mk_time_to_max > dec) - mk_time_to_max -= dec; - else - mk_time_to_max = 0; - PRINT_SET_VAL(mk_time_to_max); - break; - case 5: - if (mk_wheel_max_speed > dec) - mk_wheel_max_speed -= dec; - else - mk_wheel_max_speed = 0; - PRINT_SET_VAL(mk_wheel_max_speed); - break; - case 6: - if (mk_wheel_time_to_max > dec) - mk_wheel_time_to_max -= dec; - else - mk_wheel_time_to_max = 0; - PRINT_SET_VAL(mk_wheel_time_to_max); - break; - } +# if !defined(NO_PRINT) && !defined(USER_PRINT) +static void mousekey_param_print(void) { + xprintf(/* clang-format off */ + +#ifndef MK_3_SPEED + "1: delay(*10ms): %u\n" + "2: interval(ms): %u\n" + "3: max_speed: %u\n" + "4: time_to_max: %u\n" + "5: wheel_max_speed: %u\n" + "6: wheel_time_to_max: %u\n" + + , mk_delay + , mk_interval + , mk_max_speed + , mk_time_to_max + , mk_wheel_max_speed + , mk_wheel_time_to_max +#else + "no knobs sorry\n" +#endif + + ); /* clang-format on */ } +# endif /* !NO_PRINT && !USER_PRINT */ +# if !defined(NO_PRINT) && !defined(USER_PRINT) static void mousekey_console_help(void) { - print("\n\t- Mousekey -\n" - "ESC/q: quit\n" - "1: delay(*10ms)\n" - "2: interval(ms)\n" - "3: max_speed\n" - "4: time_to_max\n" - "5: wheel_max_speed\n" - "6: wheel_time_to_max\n" - "\n" - "p: print values\n" - "d: set defaults\n" - "up: +1\n" - "down: -1\n" - "pgup: +10\n" - "pgdown: -10\n" - "\n" - "speed = delta * max_speed * (repeat / time_to_max)\n"); - xprintf("where delta: cursor=%d, wheel=%d\n" - "See http://en.wikipedia.org/wiki/Mouse_keys\n", - MOUSEKEY_MOVE_DELTA, MOUSEKEY_WHEEL_DELTA); + mousekey_param_print(); + xprintf(/* clang-format off */ + "p: print values\n" + "d: set defaults\n" + "up: +1\n" + "dn: -1\n" + "lt: +10\n" + "rt: -10\n" + "ESC/q: quit\n" + +#ifndef MK_3_SPEED + "\n" + "speed = delta * max_speed * (repeat / time_to_max)\n" + "where delta: cursor=%d, wheel=%d\n" + "See http://en.wikipedia.org/wiki/Mouse_keys\n" + , MOUSEKEY_MOVE_DELTA, MOUSEKEY_WHEEL_DELTA +#endif + + ); /* clang-format on */ } +# endif /* !NO_PRINT && !USER_PRINT */ + +/* Only used by `quantum/command.c` / `command_proc()`. To avoid + * any doubt: we return `false` to return to the main console, + * which differs from the `bool` that `command_proc()` returns. */ +bool mousekey_console(uint8_t code) { + static uint8_t param = 0; + static uint8_t *pp = NULL; + static char * desc = NULL; + +# if defined(NO_PRINT) || defined(USER_PRINT) /* -Wunused-parameter */ + (void)desc; +# endif + + int8_t change = 0; -static bool mousekey_console(uint8_t code) { switch (code) { case KC_H: case KC_SLASH: /* ? */ +# if !defined(NO_PRINT) && !defined(USER_PRINT) + print("\n\t- Mousekey -\n"); mousekey_console_help(); +# endif break; + case KC_Q: case KC_ESC: - if (mousekey_param) { - mousekey_param = 0; - } else { - print("C> "); - command_state = CONSOLE; - return false; - } + print("q\n"); + if (!param) return false; + param = 0; + pp = NULL; + desc = NULL; break; + case KC_P: +# if !defined(NO_PRINT) && !defined(USER_PRINT) + print("\n\t- Values -\n"); mousekey_param_print(); +# endif break; - case KC_1: - case KC_2: - case KC_3: - case KC_4: - case KC_5: - case KC_6: - mousekey_param = numkey2num(code); - break; - case KC_UP: - mousekey_param_inc(mousekey_param, 1); - break; - case KC_DOWN: - mousekey_param_dec(mousekey_param, 1); - break; - case KC_PGUP: - mousekey_param_inc(mousekey_param, 10); - break; - case KC_PGDN: - mousekey_param_dec(mousekey_param, 10); - break; + + case KC_1 ... KC_0: /* KC_0 gives param = 10 */ + param = 1 + code - KC_1; + switch (param) { /* clang-format off */ +# define PARAM(n, v) case n: pp = &(v); desc = #v; break + +#ifndef MK_3_SPEED + PARAM(1, mk_delay); + PARAM(2, mk_interval); + PARAM(3, mk_max_speed); + PARAM(4, mk_time_to_max); + PARAM(5, mk_wheel_max_speed); + PARAM(6, mk_wheel_time_to_max); +#endif /* MK_3_SPEED */ + +# undef PARAM + default: + param = 0; + print("?\n"); + break; + } /* clang-format on */ + if (param) xprintf("%u\n", param); + break; + + /* clang-format off */ + case KC_UP: change = +1; break; + case KC_DOWN: change = -1; break; + case KC_LEFT: change = -10; break; + case KC_RIGHT: change = +10; break; + /* clang-format on */ + case KC_D: + +# ifndef MK_3_SPEED mk_delay = MOUSEKEY_DELAY / 10; mk_interval = MOUSEKEY_INTERVAL; mk_max_speed = MOUSEKEY_MAX_SPEED; mk_time_to_max = MOUSEKEY_TIME_TO_MAX; mk_wheel_max_speed = MOUSEKEY_WHEEL_MAX_SPEED; mk_wheel_time_to_max = MOUSEKEY_WHEEL_TIME_TO_MAX; - print("set default\n"); +# endif /* MK_3_SPEED */ + + print("defaults\n"); break; + default: - print("?"); - return false; + print("?\n"); + break; + } + + if (change) { + if (pp) { + int16_t val = *pp + change; + if (val > (int16_t)UINT8_MAX) + *pp = UINT8_MAX; + else if (val < 0) + *pp = 0; + else + *pp = (uint8_t)val; + xprintf("= %u\n", *pp); + } else { + print("?\n"); + } } - if (mousekey_param) { - xprintf("M%d> ", mousekey_param); + + if (param) { + xprintf("M%u:%s> ", param, desc ? desc : "???"); } else { - print("M>"); + print("M> "); } return true; } -#endif + +#endif /* MOUSEKEY_ENABLE */ /*********************************************************** * Utilities ***********************************************************/ -uint8_t numkey2num(uint8_t code) { - switch (code) { - case KC_1: - return 1; - case KC_2: - return 2; - case KC_3: - return 3; - case KC_4: - return 4; - case KC_5: - return 5; - case KC_6: - return 6; - case KC_7: - return 7; - case KC_8: - return 8; - case KC_9: - return 9; - case KC_0: - return 0; - } - return 0; -} static void switch_default_layer(uint8_t layer) { xprintf("L%d\n", layer); diff --git a/quantum/command.h b/quantum/command.h index 4f77be085c..676507d3bd 100644 --- a/quantum/command.h +++ b/quantum/command.h @@ -28,8 +28,7 @@ bool command_extra(uint8_t code); bool command_console_extra(uint8_t code); #ifdef COMMAND_ENABLE -uint8_t numkey2num(uint8_t code); -bool command_proc(uint8_t code); +bool command_proc(uint8_t code); #else # define command_proc(code) false #endif -- cgit v1.2.3