From 95a7c2282466252641a1d0bb1b15d50752193f4b Mon Sep 17 00:00:00 2001 From: Tran Kim Tung Date: Fri, 23 Jul 2021 00:39:08 +0800 Subject: [Keyboard] adds new revision: dztech/dz60rgb/v2_1 (#13636) --- keyboards/dztech/dz60rgb/readme.md | 5 ++- keyboards/dztech/dz60rgb/v2_1/config.h | 79 ++++++++++++++++++++++++++++++++++ keyboards/dztech/dz60rgb/v2_1/rules.mk | 26 +++++++++++ 3 files changed, 109 insertions(+), 1 deletion(-) create mode 100644 keyboards/dztech/dz60rgb/v2_1/config.h create mode 100644 keyboards/dztech/dz60rgb/v2_1/rules.mk diff --git a/keyboards/dztech/dz60rgb/readme.md b/keyboards/dztech/dz60rgb/readme.md index 1b2eb6f85f..6accc60765 100644 --- a/keyboards/dztech/dz60rgb/readme.md +++ b/keyboards/dztech/dz60rgb/readme.md @@ -8,14 +8,17 @@ A hotswap 60% RGB keyboard. * Hardware Supported: DZtech DZ60RGB V1 and V2 * Hardware Availability: [KBDfans](https://kbdfans.com/) -There are two versions of the DZ60RGB. Please use the appropriate firmware for your board. +There are three versions of the DZ60RGB. Please use the appropriate firmware for your board. * V1: STM32F303 (Arm), takes .bin files * V2: ATmega32U4 (AVR), takes .hex files +* V2.1: ATmega32U4 (AVR), takes .bin files [Flash Manual](https://docs.google.com/document/d/111qx6Qec4JqtIhWaZlMND-VuRnFtn9a-gJaHN8fsL7M/edit?usp=sharing) + Started shipping in June 2021 as a slightly modified version of v2. Make example for this keyboard (after setting up your build environment): make dztech/dz60rgb/v1:default # Arm (STM32F303) make dztech/dz60rgb/v2:default # AVR (ATmega32U4) + make dztech/dz60rgb/v2_1:default # AVR (ATmega32U4) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dztech/dz60rgb/v2_1/config.h b/keyboards/dztech/dz60rgb/v2_1/config.h new file mode 100644 index 0000000000..6928ad50ad --- /dev/null +++ b/keyboards/dztech/dz60rgb/v2_1/config.h @@ -0,0 +1,79 @@ +/* Copyright 2021 trankimtung + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x445A +#define PRODUCT_ID 0x1121 +#define DEVICE_VER 0x0003 +#define MANUFACTURER DZTECH +#define PRODUCT DZ60RGB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 } +#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 3 + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#ifdef RGB_MATRIX_ENABLE +# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +# define RGB_MATRIX_KEYPRESSES +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define DISABLE_RGB_MATRIX_BAND_SAT +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define DISABLE_RGB_MATRIX_SPLASH +# define DISABLE_RGB_MATRIX_MULTISPLASH +# define DISABLE_RGB_MATRIX_SOLID_SPLASH +# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +# define DRIVER_ADDR_1 0b1010000 +# define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +# define DRIVER_COUNT 2 +# define DRIVER_1_LED_TOTAL 63 +# define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif diff --git a/keyboards/dztech/dz60rgb/v2_1/rules.mk b/keyboards/dztech/dz60rgb/v2_1/rules.mk new file mode 100644 index 0000000000..7fdadb18dc --- /dev/null +++ b/keyboards/dztech/dz60rgb/v2_1/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = lufa-ms + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes # Use RGB matrix +RGB_MATRIX_DRIVER = IS31FL3733 +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in +LTO_ENABLE = yes -- cgit v1.2.3