From 1ed336a06499c1baee2421141d59d115f0ee3c4b Mon Sep 17 00:00:00 2001 From: tmk Date: Sat, 11 Dec 2010 23:20:49 +0900 Subject: change keyboard report descriptor for NKRO. It uses 1byte for modifiers and 15bytes(120bits) for keys now. --- USB_NKRO.txt | 77 ++++++++++++++++++++++++++++++++++++++++++++++------------ usb.c | 66 ++++++++++++++++++++++++------------------------- usb_keyboard.c | 3 ++- usb_keyboard.h | 2 +- 4 files changed, 98 insertions(+), 50 deletions(-) diff --git a/USB_NKRO.txt b/USB_NKRO.txt index 9bd8f704c3..b681d85dc5 100644 --- a/USB_NKRO.txt +++ b/USB_NKRO.txt @@ -1,6 +1,6 @@ USB NKRO MEMO ============= -2010/12/07 +2010/12/09 References @@ -9,6 +9,9 @@ USB - boot mode, NKRO, compatibility, etc... http://geekhack.org/showthread.php?t=13162 NKey Rollover - Overview, Testing Methodology, and Results http://geekhack.org/showwiki.php?title=NKey+Rollover+-+Overview+Testing+Methodology+and+Results +dfj's NKRO(2010/06) + http://geekhack.org/showpost.php?p=191195&postcount=251 + http://geekhack.org/showthread.php?p=204389#post204389 Terminogy @@ -22,18 +25,26 @@ membrane OS Support Status ----------------- -NKRO is possible at least relatively new OS. -Following OS supports both Extended and Bitmarp report. +USB NKRO is possible *without* a custom driver. +At least following OSes supports. Windows7 64bit + WindowsXP Windows2000 SP4 - Ubuntu 10.4(Linux 2.6) + Ubuntu10.4(Linux 2.6) + MacOSX(To be tested) + + +Custom Driver for USB NKRO +-------------------------- +NOT NEEDED +at least when using fllowing report formats on Windows, Linux or MacOSX. USB NKRO methods ---------------- 1. Virtual keyboards Keyboard can increase its KRO by using virtual keyboards with Standard or Extended report. - If the keyboard has 2 virtul keyboard with Standard report(6KRO), it gets 12KRO. + If the keyboard has 2 virtual keyboard with Standard report(6KRO), it gets 12KRO. Using this method means the keyboard is a composite device. 2. Exteded report @@ -70,28 +81,64 @@ Extended report is expected to be compatible with boot protocol. Bitmap report can send at most 128keys by 16bytes and 256keys by 32bytes. Bitmap report can achieve USB NKRO efficiently in terms of report size. Bitmap report needs a deliberation for boot protocol implementation. - - -Compatibility Problem ---------------------- -Some BIOS doesn't send SET_PROTCOL request, a keyboard can't switch to boot protocol mode. -This may cuase a problem on a keyboard which uses other report than Standard. +Bitmap report descriptor sample: + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x06, // Usage (Keyboard), + 0xA1, 0x01, // Collection (Application), + // bitmap of modifiers + 0x75, 0x01, // Report Size (1), + 0x95, 0x08, // Report Count (8), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0xE0, // Usage Minimum (224), + 0x29, 0xE7, // Usage Maximum (231), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum (1), + 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte + // LED output report + 0x95, 0x05, // Report Count (5), + 0x75, 0x01, // Report Size (1), + 0x05, 0x08, // Usage Page (LEDs), + 0x19, 0x01, // Usage Minimum (1), + 0x29, 0x05, // Usage Maximum (5), + 0x91, 0x02, // Output (Data, Variable, Absolute), + 0x95, 0x01, // Report Count (1), + 0x75, 0x03, // Report Size (3), + 0x91, 0x03, // Output (Constant), + // bitmap of keys + 0x95, (REPORT_BYTES-1)*8, // Report Count (), + 0x75, 0x01, // Report Size (1), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum(1), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0x00, // Usage Minimum (0), + 0x29, (REPORT_BYTES-1)*8-1, // Usage Maximum (), + 0x81, 0x02, // Input (Data, Variable, Absolute), + 0xc0 // End Collection +where REPORT_BYTES is a report size in bytes. + + +Considerations +-------------- +Compatibility + boot protocol + minor/old system + Some BIOS doesn't send SET_PROTCOL request, a keyboard can't switch to boot protocol mode. + This may cuase a problem on a keyboard which uses other report than Standard. +Reactivity + USB polling time + OS/Driver processing time Windows Problem --------------- 1. Windows accepts only 6keys in case of Standard report. It should be able to send 6keys plus 8modifiers. - 2. Windows accepts only 10keys in case of 16bytes Extended report. It should be able to send 14keys plus 8modifiers. - 3. Windows accepts only 18keys in case of 32bytes Extended report. It should be able to send 30keys plus 8modifiers. - If keys are pressed in excess of the number, wrong keys are registered on Windows. - This problem will be reportedly fixed soon.(2010/12/05) http://forums.anandtech.com/showpost.php?p=30873364&postcount=17 diff --git a/usb.c b/usb.c index 215f05de18..803fd340ec 100755 --- a/usb.c +++ b/usb.c @@ -95,7 +95,7 @@ static const uint8_t PROGMEM endpoint_config_table[] = { 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(DEBUG_TX_SIZE) | DEBUG_TX_BUFFER, // 3 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(EXTRA_SIZE) | EXTRA_BUFFER, // 4 #ifdef NKRO_ENABLE - 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KBD2_SIZE) | KBD2_BUFFER, // 5 + 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KBD2_SIZE) | KBD2_BUFFER, // 5 #else 0, // 5 #endif @@ -170,38 +170,38 @@ static uint8_t PROGMEM keyboard_hid_report_desc[] = { }; #ifdef NKRO_ENABLE static uint8_t PROGMEM keyboard2_hid_report_desc[] = { - 0x05, 0x01, // Usage Page (Generic Desktop), - 0x09, 0x06, // Usage (Keyboard), - 0xA1, 0x01, // Collection (Application), - 0x75, 0x01, // Report Size (1), - 0x95, 0x08, // Report Count (8), - 0x05, 0x07, // Usage Page (Key Codes), - 0x19, 0xE0, // Usage Minimum (224), - 0x29, 0xE7, // Usage Maximum (231), - 0x15, 0x00, // Logical Minimum (0), - 0x25, 0x01, // Logical Maximum (1), - 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte - 0x95, 0x01, // Report Count (1), - 0x75, 0x08, // Report Size (8), - 0x81, 0x03, // Input (Constant), ;Reserved byte - 0x95, 0x05, // Report Count (5), - 0x75, 0x01, // Report Size (1), - 0x05, 0x08, // Usage Page (LEDs), - 0x19, 0x01, // Usage Minimum (1), - 0x29, 0x05, // Usage Maximum (5), - 0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report - 0x95, 0x01, // Report Count (1), - 0x75, 0x03, // Report Size (3), - 0x91, 0x03, // Output (Constant), ;LED report padding - 0x95, KBD2_REPORT_KEYS*8, // Report Count (), - 0x75, 0x01, // Report Size (1), - 0x15, 0x00, // Logical Minimum (0), - 0x25, 0x01, // Logical Maximum(1), - 0x05, 0x07, // Usage Page (Key Codes), - 0x19, 0x00, // Usage Minimum (0), - 0x29, KBD2_REPORT_KEYS*8-1, // Usage Maximum (), - 0x81, 0x02, // Input (Data, Variable, Absolute), - 0xc0 // End Collection + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x06, // Usage (Keyboard), + 0xA1, 0x01, // Collection (Application), + // bitmap of modifiers + 0x75, 0x01, // Report Size (1), + 0x95, 0x08, // Report Count (8), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0xE0, // Usage Minimum (224), + 0x29, 0xE7, // Usage Maximum (231), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum (1), + 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte + // LED output report + 0x95, 0x05, // Report Count (5), + 0x75, 0x01, // Report Size (1), + 0x05, 0x08, // Usage Page (LEDs), + 0x19, 0x01, // Usage Minimum (1), + 0x29, 0x05, // Usage Maximum (5), + 0x91, 0x02, // Output (Data, Variable, Absolute), + 0x95, 0x01, // Report Count (1), + 0x75, 0x03, // Report Size (3), + 0x91, 0x03, // Output (Constant), + // bitmap of keys + 0x95, KBD2_REPORT_KEYS*8, // Report Count (), + 0x75, 0x01, // Report Size (1), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum(1), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0x00, // Usage Minimum (0), + 0x29, KBD2_REPORT_KEYS*8-1, // Usage Maximum (), + 0x81, 0x02, // Input (Data, Variable, Absolute), + 0xc0 // End Collection }; #endif diff --git a/usb_keyboard.c b/usb_keyboard.c index 7055a653fb..3b071e336f 100644 --- a/usb_keyboard.c +++ b/usb_keyboard.c @@ -211,7 +211,8 @@ static inline int8_t _send_report(usb_keyboard_report_t *report, uint8_t endpoin UENUM = endpoint; } UEDATX = report->mods; - UEDATX = 0; + if (!usb_keyboard_nkro) + UEDATX = 0; for (uint8_t i = keys_start; i < keys_end; i++) { UEDATX = report->keys[i]; } diff --git a/usb_keyboard.h b/usb_keyboard.h index 88a641f767..ebb3eb0487 100644 --- a/usb_keyboard.h +++ b/usb_keyboard.h @@ -18,7 +18,7 @@ #define KBD2_ENDPOINT 5 #define KBD2_SIZE 16 #define KBD2_BUFFER EP_DOUBLE_BUFFER -#define KBD2_REPORT_KEYS (KBD2_SIZE - 2) +#define KBD2_REPORT_KEYS (KBD2_SIZE - 1) #endif #if defined(KBD2_REPORT_KEYS) && KBD2_REPORT_KEYS > KBD_REPORT_KEYS -- cgit v1.2.3