summaryrefslogtreecommitdiffstats
path: root/tmk_core/protocol/chibios
Commit message (Collapse)AuthorAgeFilesLines
* format code according to conventions [skip ci]QMK Bot2020-08-291-12/+16
|
* Hid joystick interface (#4226)a-chol2020-08-291-0/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol <allecooll@hotmail.com> Co-authored-by: José Júnior <jose.junior@gmail.com> Co-authored-by: a-chol <achol@notamail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com>
* Add dual-bank STM32 bootloader support, given GPIO toggle on BOOT0 to charge ↵Nick Brassel2020-08-291-0/+1
| | | | RC circuit. (#8778)
* `qmk cformat` on `develop` (#9501)Nick Brassel2020-08-291-3/+1
|
* Various tidyups for USB descriptor code (#9005)Ryan2020-08-291-4/+4
|
* 2020 May 30 Breaking Changes Update (#9215)James Young2020-05-303-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Branch point for 2020 May 30 Breaking Change * Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954) * Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957) * Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958) * Migrate `ACTION_LAYER_MODS` to `LM()` (#8959) * Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968) * Convert V-USB usbdrv to a submodule (#8321) * Unify Tap Hold functions and documentation (#8348) * Changing board names to prevent confusion (#8412) * Move the Keyboardio Model01 to a keyboardio/ subdir (#8499) * Move spaceman keyboards (#8830) * Migrate miscellaneous `fn_actions` entries (#8977) * Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979) * Organizing my keyboards (plaid, tartan, ergoinu) (#8537) * Refactor Lily58 to use split_common (#6260) * Refactor zinc to use split_common (#7114) * Add a message if bin/qmk doesn't work (#9000) * Fix conflicting types for 'tfp_printf' (#8269) * Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480) * Refactor and updates to TKC1800 code (#8472) * Switch to qmk forks for everything (#9019) * audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484) * Audio enable corrections (2/3) (#8903) * Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582) * Audio enable corrections (Part 4) (#8974) * Fix typo from PR7114 (#9171) * Augment future branch Changelogs (#8978) * Revert "Branch point for 2020 May 30 Breaking Change"
* Revert "Fix conflicting types for 'tfp_printf' (#8269)"skullY2020-05-043-1/+9
| | | | This reverts commit e17b55e33ad5b3dcefcf7b828ac99aeb2daeeae2.
* format code according to conventions [skip ci]QMK Bot2020-05-041-3/+1
|
* Fix conflicting types for 'tfp_printf' (#8269)Joel Challis2020-05-033-8/+2
| | | | | | | | | | | | | * Refactor to use mpaland/printf * trim firmware size * remove keymap changes * run clang format * Fixup after rebase * fix up git-submodule command for printf
* Add support for hardware and board initialisation overrides. (#8330)Nick Brassel2020-04-132-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | * Add support for hardware and board initialisation overrides. * qmk cformat. * Add some documentation. * Docs clarity. * Make early_hardware_init_pre a no-op for now, until migrations occur. * Doco update * Make distinction between keyboard and ChibiOS board in docs * Doc anchors. * Update tmk_core/protocol/chibios/main.c Co-Authored-By: Joel Challis <git@zvecr.com> * Rework bootloader entry to be off by default, allow opting-in. Co-authored-by: Joel Challis <git@zvecr.com>
* Remove unnecessary import of rgblight.h in tmk_core/protocol/*/*.c (#8432)Takeshi ISHII2020-03-161-3/+0
| | | | | | | | | | * Remove unnecessary import of rgblight.h in tmk_core/protocol/*/*.c * tmk_core/protocol/chibios/main.c * tmk_core/protocol/lufa/lufa.c see #8380 for tmk_core/protocol/vusb/main.c. * Remove '#include "rgblight.h"' from tmk_core/protocol/vusb/main.c.
* Refactor rgblight_reconfig.h (#7773)Takeshi ISHII2020-03-101-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Moved contents of rgblight_reconfig.h to rgblight_post_config.h. In #3582, rgblight_reconfig.h had to be newly created. Now, the build system of qmk_firmware has a post_cofig feature, so that what was done in rgblight_reconfig.h can now be realized in rgblight_post_config.h. **This commit does not change the build result.** Testing script ```shell # build on master git checkout master echo master > /tmp/master_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # build on refactor_rgblight_reconfig.h git checkout refactor_rgblight_reconfig.h echo refactor_rgblight_reconfig.h > /tmp/branch_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt diff -u /tmp/master_md5.txt /tmp/branch_md5.txt ``` Test result: ``` --- /tmp/master_md5.txt 2020-01-03 15:42:22.000000000 +0900 +++ /tmp/branch_md5.txt 2020-01-03 15:42:42.000000000 +0900 @@ -1,4 +1,4 @@ -master +refactor_rgblight_reconfig.h MD5 (helix_rev2_default.hex) = f360032edd522448366d471d8f4f8181 MD5 (helix_rev2_back_default.hex) = 0c663acc6cccc44476b3b969ad22a48f MD5 (helix_rev2_back_default.hex) = e66b1195ff6d38e6e22c975b8ae42fd3 ``` * Expressions that are too long are difficult to read, so wrap them. * Edit the expression again * remove `defined(RGBLIGHT_ANIMATIONS)` in `tmk_core/common/*/suspend.c`, `tmk_core/protocol/*/main.c` move contents of rgblight_reconfig.h to rgblight.h. The following changes were made to rgblight.h. ```diff +#ifdef RGBLIGHT_USE_TIMER void rgblight_task(void); void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); void rgblight_timer_toggle(void); +#else +#define rgblight_task() +#define rgblight_timer_init() +#define rgblight_timer_enable() +#define rgblight_timer_disable() +#define rgblight_timer_toggle() +#endif ``` The following changes were made to tmk_core/common/avr/suspend.c, tmk_core/common/chibios/suspend.c, tmk_core/protocol/chibios/main.c, tmk_core/protocol/lufa/lufa.c, tmk_core/protocol/vusb/main.c. ```diff -# ifdef RGBLIGHT_ANIMATIONS rgblight_timer_enable(); -# endif ``` ```diff -#if defined(RGBLIGHT_ANIMATIONS) && defined(RGBLIGHT_ENABLE) +#if defined(RGBLIGHT_ENABLE) rgblight_task(); #endif ``` * remove 'defined(RGBLIGHT_ANIMATIONS)' in tmk_core/common/keyboard.c Co-authored-by: Joel Challis <git@zvecr.com>
* 2020 February 29 Breaking Changes Update (#8064)James Young2020-02-292-9/+9
|
* Improvements to extrakey HID descriptors (#8156)Ryan2020-02-251-8/+12
|
* Add Midi Endpoint task to ChibiOS main (#8071)Drashna Jaelre2020-02-042-1/+17
|
* Dedupe extrakey report struct, and send functions in V-USB & LUFA (#7993)fauxpark2020-02-021-14/+0
| | | | | | | | | | * Dedupe extrakey report struct, and send functions in V-USB & LUFA * Doc comment for consistency * Wrap it in ifdef to prevent unused function error * Do the same for ATSAM
* format code according to conventions [skip ci]QMK Bot2020-01-251-53/+53
|
* Fix unaligned access with LTO (#7801)George Harris2020-01-251-2/+2
| | | Forces 4 byte alignment for USB input & output buffers to prevent unaligned accesses by chibios with LTO enabled
* format code according to conventions [skip ci]QMK Bot2020-01-211-4/+4
|
* Fix lock LEDs for ChibiOS when using shared endpoints (#7877)fauxpark2020-01-211-15/+12
| | | | | | | | * Fix lock LEDs for ChibiOS when using shared endpoints * Tweak comments * Doesn't need to be uint16 anymore
* Move rgblight and backlight task to common location (#7733)Joel Challis2020-01-191-3/+0
|
* chibios/usb_main: re-check USB status in send_keyboard after sleeping the ↵xyzz2020-01-131-7/+14
| | | | | | | | thread (#7784) * chibios/usb_main: re-check USB status in send_keyboard after sleeping the thread * change send_keyboard to only have 1 exit point
* Fix KEYBOARD_SHARED_EP on ChibiOS (#7860)Joel Challis2020-01-131-1/+1
|
* Fix ChibiOS USB config for chips which support OTGv1 (#7564)Joel Challis2019-12-141-55/+69
| | | | | | | | | | * Align endpoint config as per rest of file (fixes #4783) * Add comments about explicit order use * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Run clang-format manually to fix recently changed fileszvecr2019-11-171-3/+3
|
* Fix chibios when mouse and nkro disabled (#7312)Joel Challis2019-11-101-16/+6
|
* ARM - ws2812 bitbang (#7173)Joel Challis2019-11-071-0/+8
| | | | | | | | | | | | | | | | | | | | * Initial ARM bitbang ws2812 driver * Unify chibios platform to run rgblight_task * Remove 'avr only' comments from ws2812 docs * Remove 'avr only' comments from ws2812 docs * Unify chibios platform to run rgblight_task - review comments * Remove debug flags from keymap * Add comments from review * Add defines for STM32L0XX * Attempt to get arm ws2812 working on multiple gcc versions
* clang-format changesskullY2019-08-306-973/+873
|
* Add kb and user level keyboard initialization functions (#3113)Drashna Jaelre2019-02-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add suspend functions * Disable RGB code if it's disabled * Add keyboard_init functions * Change where references so it will compile * Wrong command chained in wake up kb function * Fix non-feature file changes * Add documentation * Re-add matrix init docs * add rgblight code to example * Remove suspend code * Clean up docs * Fix docs * Fix suspend code * more doc fixes * change function to startup_* rather than keyboard_init_ * fix spelling error * fix up docs to finish removing keyboard_init * Use Pre and Post init functions * Update Documenation * Remove changes to my keymap and userspace code * Cleanup * Revert changes to extra files * Forgot a semicolon * Make sure all protocols call keyboard_setup * Cleanup functions * Unset startup_user * Remove changes from division keyboard * Readd startup_user function * Remove all to startup_user * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Add suggestion line * Rebase fixes * Update documentation to be more useful/accurate * Cleanup of documentation * Fix spacing inconsistency * Revert unexpected change to keymap
* Final HS60v2 changes. (#4790)yiancar2019-01-061-1/+1
| | | | | | | | | | | | | | | | | | | | | * initial commit, this now mostly works - RGB controls work - Dynamic keymap still broken due to eeprom - Via works * STM32 eeprom update - Update EEPROM emulation library to handle 8bit data like AVR. - This library also allows for multiple page pairs resulting in greater EEPROM size flexibility * hs60 changes * HS60 hhkb added * Update keyboards/hs60/v2/config.h Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
* fixed misplaced paranthesis in arm usb mouse send function (#4478)Christon DeWan2018-11-271-1/+1
| | | bug was causing lots of dropped events for me.
* Fix raw hid define for chibios (#4460)yiancar2018-11-211-2/+2
|
* Use a single endpoint for HID reports (#3951)James Laird-Wah2018-11-152-97/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Unify multiple HID interfaces into one This reduces the number of USB endpoints required, which frees them up for other things. NKRO and EXTRAKEY always use the shared endpoint. By default, MOUSEKEY also uses it. This means it won't work as a Boot Procotol mouse in some BIOSes, etc. If you really think your keyboard needs to work as a mouse in your BIOS, set MOUSE_SHARED_EP = no in your rules.mk. By default, the core keyboard does not use the shared endpoint, as not all BIOSes are standards compliant and that's one place you don't want to find out your keyboard doesn't work.. If you are really confident, you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here too. * unify endpoints: ChibiOS protocol implementation * fixup: missing #ifdef EXTRAKEY_ENABLEs broke build on AVR with EXTRAKEY disabled * endpoints: restore error when too many endpoints required * lufa: wait up to 10ms to send keyboard input This avoids packets being dropped when two reports are sent in quick succession (eg. releasing a dual role key). * endpoints: fix compile on ARM_ATSAM * endpoint: ARM_ATSAM fixes No longer use wrong or unexpected endpoint IDs * endpoints: accommodate VUSB protocol V-USB has its own, understandably simple ideas about the report formats. It already blasts the mouse and extrakeys through one endpoint with report IDs. We just stay out of its way. * endpoints: document new endpoint configuration options * endpoints: respect keyboard_report->mods in NKRO The caller(s) of host_keyboard_send expect to be able to just drop modifiers in the mods field and not worry about whether NKRO is in use. This is a good thing. So we just shift it over if needs be. * endpoints: report.c: update for new keyboard_report format
* Fix mouse_send() on chibiOS so it won't lock up the firmwareDrashna Jaelre2018-10-271-3/+4
|
* stm32f1xx EEPROM emulation (#3914)Takuya Urakawa2018-10-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | * * Add stm32f1xx EEPROM emulation * Fix eeprom update compare bug Squashed commit of the following: commit b8f248ae08cec0cd81ecbb8854d9b39221d4d573 Author: hsgw <urkwtky@gmail.com> Date: Sat Sep 15 19:13:48 2018 +0900 fix EEPROM_update wrong compare commit d4ed4e6ea864e967a3e17f7edee4b0c3b4a25541 Author: hsgw <urkwtky@gmail.com> Date: Sat Sep 15 17:43:47 2018 +0900 eeprom fix initialization define commit b61aa7c04d70c64df3416d63e5da08b73b6053af Author: hsgw <urkwtky@gmail.com> Date: Sat Sep 15 16:33:40 2018 +0900 maybe working * Fix FLASH_KEY defines
* Add the ability to disable the USB startup check for Chibiosyiancar2018-09-051-0/+7
| | | | | | - Added support for NO_USB_STARTUP_CHECK. This allows the keyboard do function and not get stuck in a SUSPENDED state loop in case of no USB connection. - Added support for WAIT_FOR_USB. In LUFA no keyboard has this flag enable therefor no keyboard waits for usb to be active. - Added documentation for both configuration flags as they were missing.
* STM32 EEPROM Emulation (#3741)yiancar2018-08-291-0/+7
| | | | | | | | | | | | * STM32 EEPROM Emulation - Added EEPROM emulation libaries from libmaple and Arduino_STM32. https://github.com/rogerclarkmelbourne/Arduino_STM32 and https://github.com/leaflabs/libmaple. - Renamed teensy EEPROM library and added conditional selection of library. - Remapped EEPROM memory map for 16 byte blocks (as is with STM32f3xx MCUs). - Added EEPROM initialization in main.c of Chibios. - Added EEPROM format to clear the emulated pages when EEPROM is marked as invalid. * Fixed ifdef
* Adds support for Planck Rev 6 (#2666)Jack Humbert2018-07-161-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * initial files for rev 6 with encoder * music map init, dip scan added * adds ws2812 driver for arm * flesh out dip and encoder support * adds default encoder res * adds default encoder res * start muse implementation * muse working with encoder as control * flip direction * try mouse wheel again * dont break other revs * dont break other revs * conditional autio * pwm ws driver (not working) * update build includes for chibios * update ws2812 driver/config * last commit for glasser code * working example * remove rgb for now * finish up rev6 * working encoder keycodes * add warnings to planck keymaps about the LAYOUT
* Add a custom USB driver for ARM (#2750)fredizzimo2018-04-153-42/+728
| | | | | | | | | | | | | | | | | | | | * Copy Chibios serial_usb_driver into the chibios/protocol It's renamed to usb_driver to avoid name conflicts * Make the usb driver compile * Disable ChibiOS serial usb driver for all keyboards * Change usb_main to use QMKUSBDriver * Initialize the usb driver buffers * Add support for fixed size queues * Fix USB driver initialization * Don't transfer an empty packet for fixed size streams
* Merge ChibiOS and LUFA descriptor support (#2362)fredizzimo2018-02-084-782/+348
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <