summaryrefslogtreecommitdiffstats
path: root/tmk_core/common/avr
Commit message (Collapse)AuthorAgeFilesLines
* Move tmk_core/common/backlight to quantum/backlight (#6710)Joel Challis2019-10-171-1/+4
| | | | | | | | | | | | * Move tmk_core/common/backlight to quantum/backlight * Add guards to backlight inclusion * Add guards to backlight inclusion * Update backlight guards on clueboard/60 * Use full paths to avoid vpath issues
* Banish some more magic numbers (#6662)fauxpark2019-09-072-19/+13
|
* clang-format changesskullY2019-08-307-354/+361
|
* Have clang ignore the code in bootloader_size.cskullY2019-08-301-1/+2
|
* Usbasploader bootloader option addition (#6304)yiancar2019-07-151-34/+43
| | | | | | | | | | | | | | | | | | | | | | * Added USBasp bootloader option for USBasploader * author comment * ifdef fix :) * Add usbasp target * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Make sure NOBITS is set on reset_keyDanny Nguyen2019-04-191-1/+1
| | | | | | | | Patch from https://github.com/qmk/qmk_firmware/issues/3657#issuecomment-415147411 Long story short, in avr-gcc pre-8.2, reset_key was assigned to a memory area that was in a normal range, but when 8.2 came out, that memory got moved to an out of range area, causing errors like 0x800293 out of range. Apparently, this was fixed up in avr-gcc, but we haven't seen a release with the fix yet (we expected it in 8.3, but that didn't happen for some reason). What this commit does is move the reset_key back to the original memory location it was in before.
* Next set of split_common changes (#4974)James Churchill2019-03-121-9/+0
| | | | | | | | | | | | | | | | * Update split_common to use standard i2c drivers * Eliminate RGB_DIRTY/BACKLIT_DIRTY * Fix avr i2c_master error handling * Fix i2c_slave addressing * Remove unneeded timeout on i2c_stop() * Fix RGB I2C transfers * Remove incorrect comment
* Add kb and user level keyboard initialization functions (#3113)Drashna Jaelre2019-02-141-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add suspend functions * Disable RGB code if it's disabled * Add keyboard_init functions * Change where references so it will compile * Wrong command chained in wake up kb function * Fix non-feature file changes * Add documentation * Re-add matrix init docs * add rgblight code to example * Remove suspend code * Clean up docs * Fix docs * Fix suspend code * more doc fixes * change function to startup_* rather than keyboard_init_ * fix spelling error * fix up docs to finish removing keyboard_init * Use Pre and Post init functions * Update Documenation * Remove changes to my keymap and userspace code * Cleanup * Revert changes to extra files * Forgot a semicolon * Make sure all protocols call keyboard_setup * Cleanup functions * Unset startup_user * Remove changes from division keyboard * Readd startup_user function * Remove all to startup_user * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Add suggestion line * Rebase fixes * Update documentation to be more useful/accurate * Cleanup of documentation * Fix spacing inconsistency * Revert unexpected change to keymap
* Backlight - New option : BACKLIGHT_CAPS_LOCK (#4769)Rockman182019-01-281-25/+32
| | | | | | | | | | | | | | | | | | | | | | * [BACKLIGHT_CAPS_LOCK_INDICATOR] Use backlight toggling as Caps Lock LED I've implemented this feature because S65-X doesn't have LED indicators and the existing led_set_kb(usb_led) function try to use backlight as indicator but that creates an inconsistency with backlight_config state. - define `BACKLIGHT_CAPS_LOCK_INDICATOR` to enable Caps Lock indicator using backlight (for keyboards without dedicated LED) - Don't turn off LED indicators when suspend because backlight is already turned off. Else led_set(0) will turn back on backlight. - Documentation has been updated * [BACKLIGHT_CAPS_LOCK_INDICATOR] Turn off all LED indicators except Caps Lock if BACKLIGHT_CAPS_LOCK_INDICATOR * [BACKLIGHT_CAPS_LOCK] Rename BACKLIGHT_CAPS_LOCK_INDICATOR * [BACKLIGHT_CAPS_LOCK] Use new IS_LED_ON method
* Fix RGBLIGHT_SLEEP function (#4865)Drashna Jaelre2019-01-251-17/+30
| | | | | | | | | | * Only re-enable RGBLIGHT if it was on when going to sleep * Reformat file to follow QMK Standards * Fix check, since this is a loop, whoops Much thanks to @Rockman18 for catching this and posting the additional code!
* Zeal60/Zeal65/M60-A implementation (#3879)Wilba65822018-09-131-16/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Initial version of zeal60 * WIP * Fixes issue #900 * Adding RGB underglow functionality. Fixed a compile-time conflict caused by enabling RGB underglow functionality. * Refactor RPC protocol * Fix last merge * README for RGB underglow updated. * Additional README changes. * Adding RGBW strip software-based current-limiting functionality. * RGBW current-limiting functionality should be handled by RGBSTRIP_MAX_CURRENT_PER_LIGHT instead. * Updated README to reflect implementation of built-in current limiting. * Keymap readability improvements. * Minor keymap improvements. * Fixed LED driver init sequence, formatting * Dimming implementation tested, working. * Stab LEDs synced with spacebar hits in effects. * RGB underglow tested and functional. Simplified README for RGB underglow. * Undid accidental file deletion from previous merge conflict. Safer values for RGB underglow. * Improved arrow key positions in keymap. * Added functionality to correct uneven RGB underglow. Refactored related code. * Reverted to safer values for underglow. * Changes for v0.3 * Custom LED brightness scaling will take place after current adjustment in order to avoid being overridden. * Create keymap.c Added split backspace and split shift to ISO layout * Create config.h Turned on LEDs for new layout * Fixed bug where left spacebar stabilizer LED (LC06) would adopt color of row above. * Added hhkb_wilba keymap * Update keymap.c * Update keymap.c * Update keymap.c * Added indicators, full param setting via host * Added "mousekey" layout * Added Zeal65 support, factory test mode * Keycode safe range changed, caused bugs * Bumped EEPROM version due to change in QMK keycodes * Disable HHKB "blocked" LEDs if KC_NO in keymap * Added "disable_hhkb_blocker_leds" * Required overridden function for keymaps in EEPROM * Added polar coordinate mapping, effect speed * Force Raw HID interface number to 1 always * Fixed last merge from master * Added effect speed to default keymaps * add BACKLIGHT_ prefix to vars * add BACKLIGHT_ prefix to vars * Keymap speed effect; keymap improvements/fixes Readme updated to match changes * Refactored to use common IS31FL3731/I2C drivers * Fixed make rules, backlight disabled feature * Make split rightshift default for Zeal65 * Added M60-A as a "version" of Zeal60. * Renamed IS31FL3731 driver functions * Fix suspend_wakeup_init_kb() being defined twice * First pass refactor dynamic keymaps * Updated to changed I2C and ISSI drivers * Refactor zeal_color.* usage to quantum/color.* * Updated Zeal65, fixed dynamic_keymap * Major refactoring of Zeal60 backlight and API * Lots of little cleanups * Added readme.md * Added readme.md * Added LAYOUT_60*() macros, refactored and cleaned up default keymaps * Fix compile error in suspend.c * Added Zeal65 LAYOUT macros, info.json * Added rama/m60_a, deleted zeal60/keymaps/m60_a * Fixed rama/m60_a/keymaps/proto * Fixed compilation error for suspend.c * Requested changes for PR * Fixed readme.md images * Another readme.md fix * Added drashna's requested changes
* rgblight.[ch] more configurable (#3582)Takeshi ISHII2018-09-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * add temporary test code rgblight-macro-test1.[ch] * rgblight.h : mode auto numberring and auto generate mode name symbol No change in build result. * rgblight.c use RGBLIGHT_MODE_xxx symbols No change in build result. * quantum.c use RGBLIGHT_MODE_xxx symbols No change in build result. * fix build break. when RGB_MATRIX_ENABLE defined * add temporary test code rgblight-macro-test2.[ch] * modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper() * modify rgblight_task() * configurable each effect compile on/off in config.h * update docs/feature_rgblight.md * fix conflict. docs/feature_rgblight.md * remove temporary test code rgblight-macro-test*.[ch] * fix comment typo. * remove old mode number from comment * update docs/feature_rgblight.md about effect mode * Revert "update docs/feature_rgblight.md about effect mode" This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d. * some change docs/feature_rgblight.md * fix typo * docs/feature_rgblight.md update: revise mode number table
* Fix RG Sleep issues for Teensy ControllersDrashna Jaelre2018-09-111-0/+3
| | | | | | | Appearenly, teensy controllers have some issues with waking up. If the rgblight is called "too soon", it will cause the controller to lock up, intermittently. Adding a 10 ms delay seems to fix this issue, as it lets it have enough time to handle things properly. This has been tested extensively on my Ergodox EZ, and can be seen in the @drashna userspace, under the "suspend_wakeup_init_user" function.
* Make sure that both RGBLIGHT_ENABLE is defined, for RGBLIGHT_SLEEPDrashna Jaelre2018-06-281-3/+3
|
* Add Suspend functions (#3112)Drashna Jaelre2018-06-031-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | * Add suspend functions * Disable RGB code if it's disabled * Add suspend code to ChibiOS for future compatibility * Add keyboard_init functions * Change where references so it will compile * Wrong command chained in wake up kb function * Fix non-feature file changes * Add documentation * Re-add matrix init docs * add rgblight code to example * Remove keyboard init stuff for separate PR
* Add and fix _noeeprom functions to many of the RGB Underglow functions (#3070)Drashna Jaelre2018-05-291-2/+2
| | | | | | | | | | | | | | * And and fix _noeeprom functions to many of the RGB Underglow functions * Many functions are unnecessarily calling the eeprom write code. The toggle/enable is command is especially guilty of this, as it writes to EEPROM 3 times. But rgb mode writes twice, every time it's called. And init resets the rgb eeprom range and then writes back to it twice! * Fixed the rgblight_sethsv_noeeprom to work as expected, by moving a lot of the code to a helper function. * Added a noeeprom function for mode, enable, disable, and toggle functions. (didn't bother for increase/decrease stuff, and didn't add new keycodes) * Add to predefined colors list * Add new functions to manual/docs * Update RGB Sleep feature to use _noeeprom Because that's exactly what it should be doing, actually!
* Fix compile issues for atmega328pDrashna Jaelre2018-05-201-4/+4
|
* Fix RGB Sleep codeU-LANDSRAAD\drashna2018-03-281-1/+1
|
* Generate API docs from source code comments (#2491)skullydazed2018-03-224-11/+67
| | | | | | | | | | | | | | | | | | * Generate api docs from source code * Add a bunch of doxygen comments * more doxygen comments * Add the in-progress api docs * script to generate docs from travis * Add doc generation to the travis job * make travis_docs.sh commit the work it does * make sure the docs script exits cleanly
* [Proposal?] Allow RGB Underglow to turn off when host is idle/asleep (#2104)Drashna Jaelre2018-03-191-1/+15
| | | | | | | | | | * Add RGB Underglow Sleeping * Add RGBLIGHT_SLEEP to toggle/control RGB light behavior * Update rgb docs * Update for RGB disable command
* Updates bootloader settings, adds file size check (#2029)Jack Humbert2017-11-272-91/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * pull fuse settings for bootloader jump * fix 32a chips * make automatic bootloader selection optional * quantify bootloaders * fixs #164, speeds up dfu reset * fix for chips w/o usb * missing an n * fix bootloader sizes, use words for addresses * fix bmini, pearl, and [[ issue, make things quiet * ignore avr errors on arm for now * update settings for the light * document bootloader stuff * add bootloader title
* Include host.h from suspend.cFred Sundvik2017-04-131-0/+1
|
* Simplified and polished a bit the code changes on tmk_coreLuiz Ribeiro2017-01-212-4/+4
|
* Got ps2avrGB to work with the V-USB protocolLuiz Ribeiro2017-01-213-9/+36
|
* Tidy up atomicity in timer.c and ring_buffer.hWez Furlong2016-11-271-20/+16
| | | | | | | | Adopt the macros for saving/restoring the interrupt state that are provided by the avr gcc environment. Removing intialization of the timer value; this shaves off a few bytes because globals are default initialized to zero.
* Fixed NO_SUSPEND_POWER_DOWN handlingWilba65822016-11-231-6/+1
|
* Fixed NO_SUSPEND_POWER_DOWN handlingWilba65822016-11-231-1/+7
|
* Fix #770, Fix #779IBNobody2016-09-281-4/+4
|
* Added User Print - A "light" console out option (#8)IBNobody2016-09-071-3/+3
| | | | | | | User print disables the normal print messages in the body of QMK/TMK code and is meant as a lightweight alternative to NOPRINT. Use it when you only want to do a spot of debugging but lack flash resources for allowing all of the codebase to print (and store their wasteful strings).
* Normalize line endingsFred Sundvik2016-08-272-611/+611
|
* default keymap, reset sorted out for now, added serial to makefileJack Humbert2016-07-061-17/+37
|
* reverts #343 for the most part (#474)Jack Humbert2016-07-041-2/+4
|
* Add ChibiOS support for QMK (#465)fredizzimo2016-07-012-56/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Modularity and gcc warnings fixes. * Add ChibiOS support (USB stack + support files). * Make usb_main more USB_DRIVER #define independent. * Move chibios to tool. * Implement jump-to-bootloader. * Small updates. * Fix bootloader-jump compiling. * Move AVR specific sleep_led.c into avr. * Add basic sleep_led for chibios. * Update chibios README. * NKRO fixes. * Rename some Makefile defines. * Move STM32 bootloader address config to separate .h file. * Add ARM Teensies bootloader code. * Fix chibios/usb_main GET_REPORT handing. * Add missing #include to keymap.c. * Make bootmagic.c code portable (_delay_ms -> wait_ms). * Move declaration of keymap_config. Should really not declare variables in .h files - since it's included in different .c files, a proper linker then complains that the same variable is declared more than once (once for each .c file that the offending .h is included in). * Add eeprom support for chibios/kinetis. * Rename chibios example keyboard. * Move chibios/cortex selection to local Makefiles. * Chibios: use WFI in idle. WIP suspend stuff. * ChibiOS/kinetis: sending remote wakeup. * ChibiOS/STM32: send remote wakeup. * Fix report size of boot protocol. * Fix drop key stroke Keyboard report should be checked if its transfer finishs successfully. Otherwise key stroke can be missing when other key event occurs before the last report transfer is done. Boot protocol 10ms interval probably causes this problem in case it receives key events in a row within the period. NKRO protocol suffers less or nothing due to its interval 1ms. * Chibios/usb_main: rename a variable for clarity. * Add correct chibios/bootloader_jump for infinity KB. * ChibiOS: make reset request more CMSISy. * Chibios: Add breathing sleep LED on Kinetis MCUs. * ChibiOS: Update infinity bootloader code to match updated ChibiOS. * ChibiOS: prettify/document sleep_led code. * Chibios: Remove the wait in the main loop. * Add maple mini code. * Do timeout when writing to CONSOLE EP queue. Fixes TMK bug #266. * Chibios: add 'core/protocol' to the makefiles' search path. * Chibios: Update to new USB API. * Chibios: add more guards for transmitting (fix a deadlock bug). * Add update for chibios in README * Chibios: Fix a HardFault bug (wait after start). * Chibios: cleanup usb_main code. * Chibios: Revert common.mk change (fix AVR linking problem). * core: Fix chibios user compile options Compile options can be defined in project Makefile such as UDEFS, UADEFS, UINCDIR, ULIBDIR and ULIBS. * Sysv format for ChibiOS arm-none-eabi-size Some new patches to ChibiOS puts heap as it's own section. So the berkeley format is now useless, as the heap will be included in the BSS report. The sysv format displays the bss size correctly. * Fix hard-coded path of CHIBIOS * Add support for new version of ChibiOS and Contrib The Kinetis support has moved to a separate Contrib repository in the newest version of Chibios. There has also been some structure changes. So this adds support for those, while maintaining back- wards compability. * Update ChibiOS instructions * Chibios: implement sleep LED for STM32. * Chibios: Update the main chibios README. * Chibios: fix STM32_BOOTLOADER_ADDRESS name. * Chibios: make the default bootloader_jump redefinable (weak). * Chibios: disable LTO (link-time optimisation). With LTO enabled, sometimes things fail for mysterious reasons (e.g. bootloader jump on WF with LEDs enabled), just because the linker optimisation is too aggressive. * Chibios: add default location for chibios-contrib. * ChibiOS: update mk to match chibios/master. * ChibiOS: update instructions.md. * Add chibi_onekey example. * Add comments to chibi_onekey Makefile. * Rename some Makefile defines. * Move STM32 bootloader address config to separate .h file. * Rename chibios example keyboard. * Move chibios/cortex selection to local Makefiles. * Add Teensy LC onekey example. * Chibios: use WFI in idle. WIP suspend stuff. * Update chibi/teensy instructions. * Update chibios/Teensy instructions. * Add infinity_chibios * Add keymap_hasu.c * Infinity_chibios: select correct bootloader_jump. * Infinity_chibios: improve comments. * Add generic STM32F103C8T6 example. * Add maple mini code. * STM32F103x fixes. * Add maple mini pinout pic. * Chibios: updates for 3.0.4 git. * Chibios: rename example stm32_onekey -> stm32_f072_onekey. * Chibios: add makefiles for Teensy 3.x examples. * Chibios: update Teensy 3.x instructions. * Chibios: Tsy LC is cortex-m0plus. * Chibios: add more guards for transmitting (fix a deadlock bug). * Change README for chibios * Chibios: update examples to current chibios git. Match the changes in mainline chibios: - update chconf.h - update supplied ld scripts structure - update Teensy instructions (switch to official chibios and introduce contrib) * Add ChibiOS and ChibiOS-Contrib submodules Also fix the makefile path for them. * Moves chibios keyboards to keyboards folder * First version of ChibiOS compilation Only the stm32_f072_onkey keyboard is ported at the moment. It compiles, but still doesn't link. * More chibios fixes It now compiles without warnings and links * Move the teensy_lc_onekey to the keyboards folder * Clean up the make file rule structure * Remove keymap_fn_to_action * Update more ChibiOS keyboards to QMK Most of them does not compile at the moment though. * Use older version of Chibios libraries The newest ones have problems with compilation * Remove USB_UNCONFIGURED event It isn't present in the older version of ChibiOS * Fix the infinity_chibios compilation * Fix potentially uninitialized variable * Add missing include * Fix the ChibiOS makefile * Fix some Chibios keyboard compilation * Revert the rules.mk file back to master version * Combine the chibios and AVR makefiles With just the required overrides in the respective platform specific one. * Slight makefile restrucuring Platform specific compiler options * Move avr specific targets out of the main rules * Fix ChibiOS objcopy The ChibiOS objcopy needs different parameters, so the parameters are moved to the corresponding platform rule file * Fix the objcopy for real this time The comands were moved around, so chibios used avr and the ohter way around. Also change the objsize output format * Fix the thumb flags * Fix the infinity hasu keymap * Per platform cpp flags * Add gcc-arm-none-eabi package to travis * Add arm-none-eabi-newlib to travis * Fix the name of the libnewlib-arm-none-eabi lib * Fix the ChibiOS paths So that they are properly relative, and builds don't generate extra folders * Fix the board path of stm32_f103_onekey * Only consider folders with Makefiles as subproject
* reduces rgblight warnings, integrates completely (#428)Jack Humbert2016-06-211-1/+4
|
* Optimize matrix scanning (#343)Eric Tang2016-05-231-4/+1
|
* Update functions used to write to EEPROMEric Tang2016-04-211-15/+15
|
* start-up sound working, removes tick with some devicesJack Humbert2016-04-201-1/+2
|