summaryrefslogtreecommitdiffstats
path: root/quantum/process_keycode/process_tap_dance.c
Commit message (Collapse)AuthorAgeFilesLines
* Do not leak weak mods from tap dance to the interrupting keypress (#12471)Sergey Vlasov2021-04-251-0/+4
| | | | | | | | | | | | | Tap dance callbacks may register weak mods; one case when it happens is when a tap dance registers a key with modifiers. When the tap dance is interrupted by pressing another key, these weak mods could affect the interrupting key (normally any stale weak mods are cleared at the start of action_exec() when handling a keypress event, but the tap dance interrupt check code is called later, and the weak mods left by that code were not cleared). Add another clear_weak_mods() call to preprocess_tap_dance() to make sure that the interrupting keypress is not affected by unrelated weak mods from the previous tap dance. Fixes #12445.
* Fix Tap-Hold Configs (#11127)Drashna Jaelre2021-01-041-1/+4
| | | | | | | | | | | | | | | * Add proper prototypes for Tap-Hold Per Key functions * Fix handwired/tennie default keymap * Remove unneeded references * Fix tapping term per key check in space cadet * Pre-emptive fix for tap dance * Fix marksard/leftover30 * Replace hard coded tapping term with define
* Update features to use Custom Tapping Term when appropriate (#6259)Drashna Jaelre2020-08-291-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Update Space Cadet to use Custom Tapping Term functionality * Detect correct keycode for space cadet tapping term * Update tap dancing to use global custom tapping term * Update documentation for Tap Dances * formatting pass * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/feature_tap_dance.md Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update for future * Update user keymaps for space cadet * Fix typos * Clean up tapping term stuff * Fix compiler issue if NO_ACTION_TAPPING is enabled Co-authored-by: fauxpark <fauxpark@gmail.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Generalize Tap Dance Layer functions (#6629)Drashna Jaelre2019-09-211-1/+1
| | | | | | | | | | | | | | * made tapdance dual_role general * updated original dual_role functionality * added toggling layer example * Fix dual role and add alias * Update docs about new layer tap dances * Fix up based on feedback
* clang-format changesskullY2019-08-301-143/+125
|
* Register the interrupting keycode in the tap dance state structGiuseppe Rota2018-12-301-0/+2
|
* Adds default value for TAPPING_TERM if Tap Dance is enabled (#2785)Drashna Jaelre2018-10-011-0/+4
| | | | | | * Force require TAPPING_TERM if Tap Dance is enabled * Handle lack of TAPPING_TERM more gracefully
* Fix tapdance when one-shot is disabled.Joe Wasson2018-07-151-0/+6
|
* Fixes to get tap dance to fire at proper places (#2272)scauligi2018-02-041-29/+44
| | | | | | | | * tap dance fixes: fire immediately upon completion and also get properly interrupted before macros * bugfix for tapdance improvement * fix build
* added the possibility to hav shifted(modded) tap dancepmalecka2018-01-121-0/+4
|
* fix for toggle tap dancePtomerty2017-09-101-1/+1
|
* tap-dance: key + layer helperGergely Nagy2017-08-021-0/+18
| | | | | | | | | This adds the `ACTION_TAP_DANCE_DUAL_ROLE` helper, which makes it easy to have keys that act as a key on the first tap, and as a layer toggle on the second. Fixes #1532, reported by @Ptomerty. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* switched to uint8 and 16Nick Choi2017-05-291-2/+2
|
* moved specific tap term to its own functionNick Choi2017-05-251-2/+4
| | | | included custom_tapping_term in action struct
* Added per case tapping term, updated FF-nikchi keymap.Nick Choi2017-05-251-2/+8
|
* Worked around some new Makefile issues.nielsenz2017-03-301-0/+2
|
* Clarify the quantum license (#1042)skullydazed2017-03-281-0/+15
| | | | | | | | | | * Clarify the license for files we have signoff on * Update against the currently signed off files * Remove unused and not clearly licensed headers * Replace an #endif I accidentally removed while resolving merge conflicts
* race condition between oneshot_mods and tap_danceSjB2017-01-291-1/+6
| | | | | | | | | since the keycode for a tap dance process gets process only after the TAPPING_TERM timeout, you really only have ONESHOT_TIMEOUT - TAPPING_TERM time to tap or double tap on the key. This fix save the oneshot_mods into the action.state structure and applies the mods with the keycode when it's registered. It also unregisters the mod when the the tap dance process gets reset.
* restore each_tap callbackPavlos Vinieratos2016-09-211-0/+1
|
* tap-dance: Do not start a sequence on keyupGergely Nagy2016-09-011-2/+3
| | | | | | | | | | | | | | | | | | | | There was an odd case, which confused the hell out of tap-dance: suppose you had a number of tap-dance keys, on a layer, and as part of the tap-dance, you turned that layer off - or had it on one-shot to begin with. In this case, the keydown event would trigger the tap-dance key, but the keyup would not. This had two funky consequences: - tap-dance did not correctly register that the dance has ended. - pressing any other tap-dance key would interrupt the previous tap-dance, and potentially input unwanted characters. To fix this, we simply do not start a tap-dance sequence on keyup, only when it is pressed. This way the previous sequence has enough time to time-out and finish properly, and we don't get confused. This fixes algernon/ergodox-layout#107. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Add a register/unregister_code16 pair of functionsGergely Nagy2016-08-181-4/+4
| | | | | | | | | | | | | | These functions register not only the 8bit keycode, but the modifiers too. It doesn't handle the full range of the upper 8bits, just the mods, but that's a good start. Changed the tap-dance pair functions to use these, so one can do: `ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN)` ...and that will do the right thing. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap-dance: Major rework, to make it more reliableGergely Nagy2016-08-171-60/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reworks how the tap-dance feature works: instead of one global state, we have a state for each tap-dance key, so we can cancel them when another tap-dance key is in flight. This fixes #527. Since we have a state for each key, we can avoid situation where a keyup would mess with our global state. This fixes #563. And while here, we also make sure to fire events only once, and this fixes #574. There is one breaking change, though: tap-dance debugging support was removed, because dumping the whole state would increase the firmware size too much. Any keymap that made use of this, will have to be updated (but there's no such keymap in the repo). Also, there's a nice trick used in this rework: we need to iterate through tap_dance_actions in a few places, to check for timeouts, and so on. For this, we'd need to know the size of the array. We can't discover that at compile-time, because tap-dance gets compiled separately. We'd like to avoid having to terminate the list with a sentinel value, because that would require updates to all keymaps that use the feature. So, we keep track of the highest tap-dance code seen so far, and iterate until that index. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap-dance: Include action_tapping.h for TAPPING_TERMGergely Nagy2016-08-171-0/+1
| | | | | | | Include `action_tapping.h`, so the keymap does not have to define a `TAPPING_TERM` for us, and we can use the default. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap-dance: Add some debugging supportGergely Nagy2016-07-271-0/+15
| | | | Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap-dance: Code cleanupGergely Nagy2016-07-221-21/+24
| | | | | | | | Removes a number of duplicated code, by passing actions around instead of keycodes, so the various dance action functions do not have to look up the action, but the caller does that for them. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap-dance: Support user_data for the callbacksGergely Nagy2016-07-221-41/+20
| | | | | | | | | | | Refactored the code a little, so all callbacks now receive a `user_data` pointer, which can be anything. As an example, the key pairs from `ACTION_TAP_DANCE_DOUBLE` now use this, and custom, built-in functions. This makes it easier to extend the tap dance functionality, and also simplifies the code a little. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap-dance: Support for holding keysGergely Nagy2016-07-221-1/+10
| | | | | | | | | | | | With this change, tap dance will now store the pressed state of the tap-dance key, and allow one to make an action sooner, while the key is still held, and only unregister when the key is released. The registration must happen in the `on_dance_finished` callback, while unregistering goes to `on_reset`. The surrounding code makes sure not to call either multiple times. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* add a couple of commentsPavlos Vinieratos2016-07-191-0/+2
|
* on_each_tap_fn is called on tap down and tap upPavlos Vinieratos2016-07-191-1/+1
|
* in the default case, it should be called if there is actually a tapPavlos Vinieratos2016-07-181-2/+2
| | | | | dance happening, and in the normal case, it should be called when the tap down is happening.
* change naming, and remove extraneous definitionPavlos Vinieratos2016-07-171-17/+15
|
* add an `anyway` and a `reset` callbackPavlos Vinieratos2016-07-161-1/+35
| | | | | | | when using tap dance, we have the `regular` callback that is called on the last tap. this commit adds an `anyway` callback that is called on every tap, and a `reset` callback that is called on reset of the tap dance taps.
* in case its NULLPavlos Vinieratos2016-07-161-1/+3
|
* Moves features to their own files (process_*), adds tap dance feature (#460)Jack Humbert2016-06-291-0/+90
* non-working commit * working * subprojects implemented for planck * pass a subproject variable through to c * consolidates clueboard revisions * thanks for letting me know about conflicts.. * turn off audio for yang's * corrects starting paths for subprojects * messing around with travis * semicolon * travis script * travis script * script for travis * correct directory (probably), amend files to commit * remove origin before adding * git pull, correct syntax * git checkout * git pull origin branch * where are we? * where are we? * merging * force things to happen * adds commit message, adds add * rebase, no commit message * rebase branch * idk! * try just pull * fetch - merge * specify repo branch * checkout * goddammit * merge? idk * pls * after all * don't split up keyboards * syntax * adds quick for all-keyboards * trying out new script * script update * lowercase * all keyboards * stop replacing compiled.hex automatically * adds if statement * skip automated build branches * forces push to automated build branch * throw an add in there * upstream? * adds AUTOGEN * ignore all .hex files again * testing out new repo * global ident * generate script, keyboard_keymap.hex * skip generation for now, print pandoc info, submodule update * try trusty * and sudo * try generate * updates subprojects to keyboards * no idea * updates to keyboards * cleans up clueboard stuff * setup to use local readme * updates cluepad, planck experimental * remove extra led.c [ci skip] * audio and midi moved over to separate files * chording, leader, unicode separated * consolidate each [skip ci] * correct include * quantum: Add a tap dance feature (#451) * quantum: Add a tap dance feature With this feature one can specify keys that behave differently, based on the amount of times they have been tapped, and when interrupted, they get handled before the interrupter. To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets explore a certain setup! We want one key to send `Space` on single tap, but `Enter` on double-tap. With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be send first. Thus, `SPC a` will result in `a SPC` being sent, if they are typed within `TAPPING_TERM`. With the tap dance feature, that'll come out as `SPC a`, correctly. The implementation hooks into two parts of the system, to achieve this: into `process_record_quantum()`, and the matrix scan. We need the latter to be able to time out a tap sequence even when a key is not being pressed, so `SPC` alone will time out and register after `TAPPING_TERM` time. But lets start with how to use it, first! First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array. This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are two possible options: * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the current state of the tap-dance action. The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. And that's the bulk of it! Do note, however, that this implementation does have some consequences: keys do not register until either they reach the tapping ceiling, or they time out. This means that if you hold the key, nothing happens, no repeat, no nothing. It is possible to detect held state, and register an action then too, but that's not implemented yet. Keys also unregister immediately after being registered, so you can't even hold the second tap. This is intentional, to be consistent. And now, on to the explanation of how it works! The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and the timer. This means that you have `TAPPING_TERM` time to tap the key again, you do not have to input all the taps within that timeframe. This allows for longer tap counts, with minimal impact on responsiveness. Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of tap-dance keys. For the sake of flexibility, tap-dance actions can be either a pair of keycodes, or a user function. The latter allows one to handle higher tap counts, or do extra things, like blink the LEDs, fiddle with the backlighting, and so on. This is accomplished by using an union, and some clever macros. In the end, lets see a full example! ```c enum { CT_SE = 0, CT_CLN, CT_EGG }; /* Have the above three on the keymap, TD(CT_SE), etc... */ void dance_cln (qk_tap_dance_state_t *state) { if (state->count == 1) { register_code (KC_RSFT); register_code (KC_SCLN); unregister_code (KC_SCLN); unregister_code (KC_RSFT); } else { register_code (KC_SCLN); unregister_code (KC_SCLN); reset_tap_dance (state); } } void dance_egg (qk_tap_dance_state_t *state) { if (state->count >= 100) { SEND_STRING ("Safety dance!"); reset_tap_dance (state); } } const qk_tap_dance_action_t tap_dance_actions[] = { [CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT) ,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln) ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg) }; ``` This addresses #426. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org> * hhkb: Fix the build with the new tap-dance feature Signed-off-by: Gergely Nagy <algernon@madhouse-project.org> * tap_dance: Move process_tap_dance further down Process the tap dance stuff after midi and audio, because those don't process keycodes, but row/col positions. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org> * tap_dance: Use conditionals instead of dummy functions To be consistent with how the rest of the quantum features are implemented, use ifdefs instead of dummy functions. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org> * Merge branch 'master' into quantum-keypress-process # Conflicts: # Makefile # keyboards/planck/rev3/config.h # keyboards/planck/rev4/config.h * update build script