summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired
Commit message (Collapse)AuthorAgeFilesLines
* [Keyboard] Fix compiler issues for handwired/6macro (#11098)Drashna Jaelre2020-12-012-18/+10
|
* fix handwired/swiftrax/beegboy keymaps (#11071)Brandon Claveria2020-12-012-2/+2
| | | Co-authored-by: Swiftrax <swiftrax@gmail.com>
* fix handwired/swiftrax/bebol keymaps (#11072)Brandon Claveria2020-12-012-6/+6
| | | Co-authored-by: Swiftrax <swiftrax@gmail.com>
* 2020 November 28 Breaking Changes Update (#11053)James Young2020-11-2812-247/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
* Remove references to ch-bootloader-jump.patch (#10998)Joel Challis2020-11-221-2/+0
|
* add unsplit (#10892)Brandon Claveria2020-11-199-0/+208
| | | | | Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com> Co-authored-by: Swiftrax <swiftrax@gmail.com>
* [Keyboard] added Pill60 to handwired/pill60 (#10798)Ikta2020-11-1521-0/+1976
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * added to handwired pill60 * Update keyboards/handwired/pill60/config.h and all other PR suggested changes Deleted DESCRIPTION Co-authored-by: Drashna Jaelre <drashna@live.com> Update keyboards/handwired/pill60/readme.md Smaller image in readme Co-authored-by: Drashna Jaelre <drashna@live.com> Update keyboards/handwired/pill60/info.json Deleted key_count Co-authored-by: Ryan <fauxpark@gmail.com> Update keyboards/handwired/pill60/keymaps/default/keymap.c Deleted backslash on keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> Update keyboards/handwired/pill60/pill60.h Deleted led.h Co-authored-by: Ryan <fauxpark@gmail.com> Update keyboards/handwired/pill60/blackpill_f401/rules.mk Update stm32f401 rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> Update keyboards/handwired/pill60/blackpill_f411/rules.mk Update stm32f411 rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> Update keyboards/handwired/pill60/bluepill/rules.mk Update bluepill rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> Update keyboards/handwired/pill60/rules.mk Added comment on rules.mk to help ] Co-authored-by: Ryan <fauxpark@gmail.com> deleted bootloader_defs.h added GPL2 + compatible license header updated keymap readme updated those that don't need common_config.h and deleted some unnecessary spaces in f411/rules.mk updated default folder in rules.mk * fix and simplify build files according to onekey example * Added GPL2+ Compatible license header
* [Keyboard] add Symmetric70 keyboard prototype (#10780)Takeshi ISHII2020-11-1511-0/+702
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * proto_symmetric70 作成中 74hc157 無しで 片手動作は、右と左でそれぞれうごいた。 * add 74HC157 support * add keymaps/default_mac * update proto_symmetric70/keymaps/default_mac/readme.md * update 74HC157 support * add keyboards/handwired/proto_symmetric70/matrix.c.patch * update keyboards/handwired/proto_symmetric70/readme.md * rename proto_symmetric70 to symmetric70_proto * Update keyboards/handwired/symmetric70_proto/config.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/symmetric70_proto/symmetric70_proto.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/symmetric70_proto/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * update readme.md * update keyboards/handwired/symmetric70_proto/config.h * remove keyboards/handwired/symmetric70_proto/matrix.c.patch * Update keyboards/handwired/symmetric70_proto/matrix.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/symmetric70_proto/matrix.c Co-authored-by: Drashna Jaelre <drashna@live.com> * use KC_NO, _______ Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
* handwired/onekey/blackpill_f401: Fix I2C pin config mismatch (#10322)Sergey Vlasov2020-11-121-0/+23
| | | | | | | | | | | | | | By default the `i2c_master` driver for ChibiOS uses the B6 pin for `I2C1_SCL` and the B7 pin for `I2C1_SDA`. However, the ChibiOS board file used for the F401 Blackpill board (`ST_STM32F401C_DISCOVERY`) configures B6 as `I2C1_SCL` and B9 as `I2C1_SDA`, and if that configuration is left unchanged, enabling the `i2c_master` driver results in having two pins (B7 and B9) configured as `I2C1_SDA` at the same time, which does not work properly (experimental results show that the B9 pin still works as `I2C1_SDA` in that case, and the B7 pin does not work). Configure the B9 pin as an input with pull-up in `board_init()`, so that the B7 pin can be configured as `I2C1_SDA` by the I2C driver.
* Add OLED support for Riblee F411 (#10778)Reibl János Dániel2020-11-024-2/+52
| | | | | * Add OLED support for Riblee F422 * Fix typo
* [Keyboard] add bebol keyboard (#10763)Brandon Claveria2020-11-019-0/+228
| | | | | | | | | | | | * add bebol keyboard * Change PID * Update keyboards/handwired/swiftrax/bebol/rules.mk Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Swiftrax <swiftrax@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
* add beegboy keyboard (#10762)Brandon Claveria2020-11-019-0/+239
| | | | | | | | | | | | | | | | * add layout macro * add beegboy keymaps * fix matrix pins * Change PID * Update keyboards/handwired/swiftrax/beegboy/config.h Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Swiftrax <swiftrax@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
* Fix `implicit declaration of function 'get_host_led_state'` (#10803)Ryan2020-10-301-1/+1
|
* Hnah108 refactor (#10787)Ryan2020-10-309-275/+494
| | | Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add brightness level API to OLED driver (#10772)Ryan2020-10-291-0/+6
| | | | | * Add brightness level API to OLED driver * Set default brightness to 255
* [Keyboard] Add handwired F411 (#10504)Reibl János Dániel2020-10-286-0/+340
| | | Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* Rename keyboard-level readmes to lower-case (#10759)Erovia2020-10-2510-0/+0
| | | | | This is the recommendation in the [PR Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it will make working with them easier in the CLI/API/etc.
* [Keyboard] Freoduo - handwired split ortho keyboard. (#10724)Filip Paryż2020-10-249-0/+384
| | | | | | | * Freoduo v1 - with fixes from @fauxpark and rebased to master branch of QMK. * One more suggested fix from @fauxpark * Fixes after @drashna review.
* [Keyboard] Add pteron44 keyboard (#10708)Fidel Coria2020-10-237-0/+299
| | | | | | | | | | | | | * Add pteron44 * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> * Apply suggestions from code review part 2 Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
* Ferris reorganization (#10564)Pierre Chevalier2020-10-1711-843/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add my own keymap * Layer 0: Workman * Layer 1: RSTHD (my own take on it) * Layer 2: Mouse * Layer 3: Navigation * Layer 4: Symbols right * Layer 5: Symbols left * Layer 6: Fn keys * Layer 7: Numbers * Layer 8: Vim and misceallaneaous accessible from any other layer * Move the current code to a 0.1 folder in preparation for upcoming changes Version 0.2 is currently being prototyped and uses an arm chip which will need its own firmware. There is also the Ferris sweep which uses a pro-micro compatible board which will need its own directory. * Move Ferris out of handwired and into the light The keyboard is now well out of the prototype phase as tens of them have been produced and acquired by various people. With 0.2 coming out, adoption is going to increase again as the board will be available for sale at some recognized vendors. Now is probably a good time to recognize its status as more than a prototype :) * Add code for the Ferris Sweep (a.k.a cradio) The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB. It has the key layout of a Ferris and uses a pro-micro connected to the switches via direct pins so that diodes are not needed and the soldering is minimal. With their blessing, I took the code for it from DPB's own repo: https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio and did some adaptations such as removing commented out code, enabling EE_HANDS and mouse keys for consistency with my existing Ferris code. * Fix indentation in rules.mk * Fix indentation in sweep's config * Remove unnecessary lines from sweep's rules.mk * Remove unnecessary lines from sweep's rules.mk * Rename 0.1 to 0_1 This avoids the dot looking like the separation between a filename and its extension. In the same commit, bring matrix.c to the 0_1 folder as this was needed for the code to compile properly (matrix.c is referred to in the readme under `0_1` and is specific to that revision of the firmware). * Update copyright statements for Sweep
* [Keyboard] update keymap of zergo keyboard (#10402)Evgenii2020-10-134-41/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Rename keyboards/handwired/zergo/keymap.c to keyboards/handwired/zergo/keymaps/default/keymap.c * Update rules.mk * Update rules.mk * Update bootloader.mk * Update rules.mk * Update bootloader.mk * Update info.json * Update rules.mk * Update zergo.h * Update info.json * Update keymap.c * Update keyboards/handwired/zergo/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/handwired/zergo/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * update layout * update zergo layout * update layout * Update keyboards/handwired/zergo/keymaps/default/keymap.c Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
* Add STM32Duino to bootloader selection (#10558)Ryan2020-10-134-31/+6
|
* Clean ChibiOS platform files (#10505)Reibl János Dániel2020-10-084-1492/+0
| | | | | | | | | * Clean ChibiOs platform files * Remove I2C and timer definitions * Remove unnecessary files and rename readme Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* [Keyboard] LeftyNumpad Keyboard (#10500)Tom Swartz2020-10-078-0/+348
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Clean LeftyNumpad code * Fix typo in recently renamed file * Fix issues with keymap layout * Initial PR Feedback fixes * Update keyboards/handwired/leftynumpad/config.h Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/leftynumpad/config.h Co-authored-by: Joel Challis <git@zvecr.com> * Apply suggestions from code review Co-authored-by: Joel Challis <git@zvecr.com> * Apply suggestions from code review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add fixes based on PR feedback * Update keyboards/handwired/leftynumpad/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
* [CLI] Add c2json (#8817)Erovia2020-10-062-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Basic keymap parsing finally works * Add 'keymap.json' creation to the qmk.keymap module * Add tests and fix formatting * Fix/exclude flake8 errors * Convert keymap.c to valid keymap.json * Fix some errors * Add tests * Finalize keymap.json creation, add json template * Add docs * Move pygments to the standard requirements * Add support for nameless layers, fix tests * Fix things after rebase * Add missing 'keymap' value. * Fix missing layer numbers from advanced keycodes Buckwich noticed that if the advanced keycode / layer toggling key contains a number, it goes missing. Now we properly handle them. Thx for noticing! * Apply suggestions from code review * fixup tests Co-authored-by: Zach White <skullydazed@drpepper.org> Co-authored-by: skullY <skullydazed@gmail.com>
* [Keymap] Move my custom functions and keymaps to userspace (#10502)Reibl János Dániel2020-10-046-447/+3
| | | | | | | | | * Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality * Move keymaps to community layouts * Remove keymaps from userspace readme.md Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* [Keymap] Add onekey keymap for OLED testing (#10380)Sergey Vlasov2020-10-043-0/+477
| | | | | * Add onekey keymap for OLED testing * Add license header
* [Keymap] Added 333fred 5x6_5 keymap (#10272)Fred Silberberg2020-10-045-0/+667
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * First pass at manuform layout. * Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer. * Use a 32-bit timer that can actually hit 5 minutes. * Some updates after a day of usage: * Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes. * Turn off the OLEDs after 5 minutes * Move the keys around a bit. * Add many more quotes. * Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots. * Revert osm on lgui as it makes start menu search impossible to use. * Use LTO_ENABLE flag. * License all of my (333fred's) keymaps as MIT. * Update users/333fred/rgb.c Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keyboard] Add astro65 handwired (#10449)Brandon Claveria2020-09-299-0/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add pandemic keyboard * Fix default keymap * Add via keymap * Fix via keymap * Fix keymaps and pandamic.h * add info.json * update info.json * Apply suggestions from code review * Update keyboards/handwired/swiftrax/pandamic/info.json * make suggested changes * Add astro65 * fix info.json * Apply suggestions from code review * add more layers for via * Apply suggestions from code review * halp * add other layout * fix astro65.h * commit suggestions * Update keyboards/handwired/swiftrax/astro65/info.json
* Add Unicode modes for `handwired/riblee_f401:riblee` (#10461)Reibl János Dániel2020-09-283-3/+21
| | | | | | * Add unicode modes * Update keyboards/handwired/riblee_f401/keymaps/riblee/config.h
* [Keyboard] Add SiCK-PAD handwired keyboard (#10429)Joel Schneider2020-09-287-0/+193
| | | | | | | | | | | | | * Add sick_pad * Adjust setup for Proton C * Add readme * Add info.json * Make requested changes * Resolve PR issues
* format code according to conventions [skip ci]QMK Bot2020-09-242-97/+97
|
* [Keyboard] add 3dp660 handwired (#10296)gooberpsycho2020-09-239-0/+313
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Create keymap.c * Add files via upload * Added files for handwired 3d printed clueboard 660 * create via layout files * added layout files for via * updated product ID to fix id conflicts * change product ID to fix ID conflicts. * fixed capitalization error that was causing issues * fixed capitalization issues. * fix syntax errors * Fixed syntax errors (stray punctuation) * Compatibility fixes * Compatibility fixes * Compatibility fixes * Compatibility fixes * capitalization fixes * Compatibility fixes * Compatibility fixes * Compatibility Fixes * Compatibility fixes * Compatibility fixes * Compatibility changes * upkeep, fixing typos * Update keyboards/handwired/3dp660/config.h Removed Description line * Update keyboards/handwired/3dp660/rules.mk correct bootloader * Update keyboards/handwired/3dp660/3dp660.h fix case sensitive typos * Update keyboards/handwired/3dp660/keymaps/default/keymap.c change tab indentation to space indentations. * Update keyboards/handwired/3dp660/keymaps/via/keymap.c change tab indentations to space indentations * Delete 3dp660.json This file was for VIA, and shouldn't be in this repo. I placed it here so I wouldn't misplace it in my filesystem. My apologies. * Update info.json change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi". * Update keymap.c change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi". * Update keymap.c more capitalization fixes * Update keyboards/handwired/3dp660/readme.md shortened imgur url * Update keyboards/handwired/3dp660/rules.mk remove extraneous comments * Delete config.h * Update keyboards/handwired/3dp660/rules.mk * Update 3dp660.c add license headers to all .c and .h files * Update 3dp660.h added license header to all .c and .h files. * Update keymap.c added license header to all .c and .h files. * Update keymap.c added license header to all .c and .h files. * Update keyboards/handwired/3dp660/readme.md Add maintainer URL * Update keyboards/handwired/3dp660/keymaps/default/keymap.c remove extraneous default keymap layers * Update keyboards/handwired/3dp660/keymaps/default/rules.mk * Update rules.mk Moved LTO to keyboard level. * Update rules.mk Moved LTO to keyboard level. * Delete rules.mk Made obsolete by LTO move to keyboard level. * Update keyboards/handwired/3dp660/rules.mk capitalization errors. * Apply suggestions from code review Housekeeping, changing code for readability.
* add handwired/swiftrax/retropad (#10331)Brandon Claveria2020-09-229-0/+298
| | | | | | | | | | | | | | | | | |