summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* Fix battery level code in adafruit_ble.cpp (#6648)bwhelm2019-09-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Fix battery level code in adafruit_ble.cpp The code in tsk_core/protocol/lufa/adafluit_ble.cpp that polls the battery level for the Adafruit feather BLE controller reads the regulated voltage, not the raw voltage coming from the battery. To do that, the Adafruit Feather docs say you should read from pin A9: https://learn.adafruit.com/adafruit-feather-32u4-basic-proto/power-management#measuring-battery-4-9. (See also https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/pinouts#logic-pins-2-9.) I'm not sure why, but analogRead(9); doesn't read the correct pin. Checking all available analog pins experimentally, it turns out that analogRead(7); returns the correct value. So the code above should read: state.vbat = analogRead(7); * Update tmk_core/protocol/lufa/adafruit_ble.cpp Co-Authored-By: Drashna Jaelre <drashna@live.com> * Remove old comment * Fix linking error * Remove `#ifdef` around `#include analog.h`. * Really fix linking error
* Removed prescaler define from avr i2c, as it was impossible to use (#6617)Mikkel Jeppesen2019-08-301-2/+2
|
* Fix Redefinition of OLED_TIMEOUT (#6628)Drashna Jaelre2019-08-301-1/+0
|
* clang-format changesskullY2019-08-3057-7001/+4882
|
* Added OLED Display autoscroll during periods of OLED data inactivity (#6546)XScorpion22019-08-252-6/+42
| | | | | | | | * Added OLED Display autoscroll during periods of OLED data inactivity. * Fixing compile errors * Feedback from review
* Relocate pca9555 driver to core (#6563)Joel Challis2019-08-222-0/+133
| | | | | | | | * Move pca9555 files to central location * Get pca9555 boards compiling * Slight alignment of rules.mk
* (OLED) Added support for CR (#6399)XScorpion22019-07-271-1/+6
| | | | | Currently OLED Dirver only supports LF (\n) character in a string to clear out the rest of the current line and advance to the next line for writing. This PR adds support for CR (\r) character as well to advance to the next line, however not clear out the rest of the current line. This is extremely useful when you want to display a multi-line logo using a single array without wiping out exiting lines and flagging the OLED as dirty unnecessarily.
* Refactoring wilba.tech PCBs, updating Rama Works U80-A (#6272)Wilba2019-07-212-21/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Added WT65-B, WT75-B, minor fixes * Update keyboards/wilba_tech/wt65_b/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/wilba_tech/wt65_b/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/wilba_tech/wt75_b/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Change DEBOUNCING_DELAY to DEBOUNCE * Change DEBOUNCING_DELAY to DEBOUNCE * Move Zeal60/Zeal65 files to keyboards/wilba_tech * Change DEBOUNCING_DELAY to DEBOUNCE * Refactoring zeal60 code to wilba_tech * Moved Rama Works PCBs to wilba_tech * Rename Rama Works files * Cleanup info.json * Cleanup readme.md * Cleanup USB device strings * U80-A RGB matrix, IS31FL3731 driver changes * Fixed #include from keyboards/zeal60
* Align ARM i2c_readReg with AVR (#6314)Joel Challis2019-07-162-3/+3
| | | | | | * Align arm i2c_readReg with avr * Align arm i2c_readReg with avr - fix cannonkeys
* Add ARM I2Cv1 support to i2c_master (#6262)Joel Challis2019-07-162-23/+52
| | | | | | * Add ARM I2Cv1 support to i2c_master * Add I2Cv1 docs
* Add GPL3 header to avr i2c files (#6332)Drashna Jaelre2019-07-154-2/+62
| | | | | | | | * Add GPL3 header to avr i2c files * Add for i2c_slave as well * Fix formatting of license header
* Use QUANTUM_LIB_SRC for i2c_master.c inclusion (#5617)Drashna Jaelre2019-07-091-3/+1
| | | Using QUANTUM_LIB_SRC prevents the warning when multiple sources add the i2c_master.c file. Boards such as the Ergodox EZ Glow see this warning every time they compile because the board uses the file in general, and because the RGB LED Matrix requires it, as well.
* Add SH1106 OLED support (#5787)Michael F. Lamb2019-06-112-4/+41
| | | | | | | | | | | | | | | | | * modify oled_driver to support SH1106 also: - improve mechanism to specify which OLED IC we use - comment calc_bounds() - give OLED_COLUMN_OFFSET a default value - inline comment re: OLED MEMORY_MODE and SH1106 - update docs/feature_oled_driver.h for SH1106 support and related changes - docs: OLED: note we have tested SSD1306 on ARM boards (per @XScorpion2) - define out MEMORY_MODE when using SH1106 OLED driver * document that SSD1306 128x64 on AVR works Per @XScorpion2: https://github.com/qmk/qmk_firmware/pull/5787#discussion_r291837842
* Fixing OLED Driver for 128x64 displays (#6085)XScorpion22019-06-072-4/+49
|
* Moving rgb typedefs into a single location (#5978)XScorpion22019-06-042-2/+2
| | | | | Because someone named the define poorly Using full relative path as handwired/promethium has a color.h file
* Parameterise STM32 I2C pin modes and timing parameters. (#5671)Nick Brassel2019-06-012-11/+45
| | | | I2C timing parameters were seemingly set up for an STM32F303 target MCU, at a specific clock speed. This commit allows specifying the timing parameters via config.h, allowing other STM32 MCUs to be targeted, potentially at different clock frequencies. Alternate function modes for the I2C pins are now also configurable, allowing for remapping to other pins.
* NK65 Addition (#5865)yiancar2019-05-152-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | * Nk65 initial commit * Minor fix for compatibility * Make everything pretty * Update keyboards/nk65/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/nk65/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Chmod Dummy * Update getting_started_introduction.md * Revert "Update getting_started_introduction.md" This reverts commit daf446acf7ae4ae00488b389ce04f2cfca708d44.
* Fixing incorrect usage of RGBLED_NUM in ws2812 driver when used with RGB ↵XScorpion22019-05-011-1/+1
| | | | Matrix (#5744)
* Removed / replaced questionable logos and added licenses file for safe logosRyan Caltabiano2019-04-202-12/+57
|
* Reducing size of data send in one frame & update Zen rev2 oled usageRyan Caltabiano2019-04-202-19/+31
|
* OLED Driver FeatureRyan Caltabiano2019-04-207-25/+996
|
* Features/ws2812 matrix driver (#5418)XScorpion22019-04-142-1/+29
| | | | | | * WS2812 driver implementation for RGB Matrix * Added driver configuration docs
* Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes (#5532)Jack Humbert2019-04-082-0/+459
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * RGB Matrix overhaul Breakout of animations to separate files Integration of optimized int based math lib Overhaul of rgb_matrix.c and animations for performance * Updating effect function api for future extensions * Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary * Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain * Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes * fix bug in quantum/rgb_matrix_drivers.c Co-Authored-By: jackhumbert <jack.humb@gmail.com> * update command setting to the correct default * correct rgb config * remove commented-out lines * update docs for the 3737 * Update docs/feature_rgb_matrix.md Co-Authored-By: jackhumbert <jack.humb@gmail.com>
* i2c_init update to work with atmega32a boards (#5562)MechMerlin2019-04-061-0/+12
| | | | | | | * On i2c_init, enable two wire interface, twi interrupt, and slave address ACK along with pull up resistors. * thanks to some testing by drashna, we know that setting TWI doesn't work for all boards. Putting the new code into an ifdef block
* Fix return value of i2c_readReg and i2c_receive (#5410)zvecr2019-03-151-2/+2
|
* Next set of split_common changes (#4974)James Churchill2019-03-125-98/+71
| | | | | | | | | | | | | | | | * Update split_common to use standard i2c drivers * Eliminate RGB_DIRTY/BACKLIT_DIRTY * Fix avr i2c_master error handling * Fix i2c_slave addressing * Remove unneeded timeout on i2c_stop() * Fix RGB I2C transfers * Remove incorrect comment
* Haptic feedback generalized - DRV2605 and solenoids (#4939)ishtob2019-02-166-20/+523
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards * Haptic feedback enhancements: on/off toggle working, feedback order working todo: -work on modes switching -get modes switching to save to eeprom * haptic enhancement - eeprom and modes added * Added set and get functions for haptic feedback * initial implementation of solenoids under haptic feedback * changed eeprom to 32 bits to reserve blocks for future features * start documentation of haptic feedback * change keycode per comment from reviewers * typo fixes * added eeprom for solenoid configs * added solenoid and docs * Add/fix default parameters configs, improve docs * more doc cleanup * add in solenoid buzz toggle, clean up doc * some fixes for error in compiling solenoid * fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c * fixes for avr side issues * update keymap * fix keymap compile error * fix bugs found during solenoid testing * set pin that is not powered during bootloader * added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
* Added APA102 support (#4940)Mikkel Jeppesen2019-02-152-0/+147
| | | | | | | | | | | | * Fixed pin for RGB * Re-did apa102 stuff * changed to use pincontrol functions * Removed a newline? * Changed to comply with project style
* Add Satisfaction75 to QMK, Enable EEPROM on stm32f072 (#5094)Andrew Kannan2019-02-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add stm32f072 base ck4x4 to handwired * add prints * Save these tries * Save changes again * Working hadron oled * OLEd working but ws2812b still iffy: * save another try * Encoder feature + OLED * RTC code * Implement clock setting mode * Whitespace * Encoder hooked up to working LED PWM code * Add missing files * eeprom changes * Save changes * Move i2c master * Move satisfaction75 under cannonkeys * Set proper default folder * Revert some core changes * Undo paved iris changes * Reorganize code for maintainability and prep for new features * Add starting code for clock OLED mode * Clock set mode finished * Add custom encoder modes * Actually add VIA keymap * Gate to only 072 * fix gate for only 072 * Update header guards and includes * Update i2c selection strategy * Update board.c to handle software reset to DFU
* cleanupskullY2019-02-103-1/+2
|
* led_matrix works nowskullY2019-02-103-10/+16
|
* compiles, but long delay on startup and problemsskullY2019-02-102-5/+15
|
* The beginning of a simple led matrix driver for is31fl3731skullY2019-02-102-0/+449
|
* Practice60 RGB and PWM Backlight (#4929)Andrew Kannan2019-01-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | * Update Practice60 to enable RGB via SPI DMA and use PWM backlight breathing * Correct stm32f103c8t6 flash size in eeprom definition * Remove unused files and improve ifdef checks * Update quantum/rgblight.c Co-Authored-By: awkannan <andrew.kannan@klaviyo.com> * Update quantum/rgblight.c Co-Authored-By: awkannan <andrew.kannan@klaviyo.com> * EEPROM implementation fix and updated p60 code * Update define * Remove dead code * Update keymap to remove test key * Update keymap again
* Rename i2c_slave functions so it can coexist with i2c_master (#4875)James Churchill2019-01-222-20/+18
| | | Also merges tx/rx buffers, as only one is necessary.
* Adds support for JacoBurge's TouchPad (#4186)Jack Humbert2019-01-101-1/+4
| | | | | | | | | | | | | | | | * add touchpad * progress * working with leds and vibrations * adds readme * Update keyboards/touchpad/readme.md Co-Authored-By: jackhumbert <jack.humb@gmail.com> * updates
* Adds Proton C Conversion (#4661)Jack Humbert2019-01-104-0/+1325
| | | | | | | | | | | | | | | | | | | | | | | | * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
* Final HS60v2 changes. (#4790)yiancar2019-01-061-1/+1
| | | | | | | | | | | | | | | | | | | | | * initial commit, this now mostly works - RGB controls work - Dynamic keymap still broken due to eeprom - Via works * STM32 eeprom update - Update EEPROM emulation library to handle 8bit data like AVR. - This library also allows for multiple page pairs resulting in greater EEPROM size flexibility * hs60 changes * HS60 hhkb added * Update keyboards/hs60/v2/config.h Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
* Also fix use of weak stm32 internal pullupyiancar2018-12-191-2/+2
|
* Minor STM32 i2c driver cleanupyiancar2018-12-191-2/+0
|
* adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support ↵ishtob2018-12-0411-4/+1849
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (#4462) * add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice
* I2C driver docs (#4298)yiancar2018-11-101-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | * I2C driver docs - Added I2C driver docs. - Changed arm master i2c driver to have a weak i2c_init as it is impossible to account for all possible port configuration in the STM32 world. * Update docs/i2c_driver.md Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy> * Update docs/i2c_driver.md Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy> * Update docs/i2c_driver.md Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy> * Update docs/i2c_driver.md Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy> * GPIO release fix
* Remove all of the deprecated RGB definesDrashna Jaelre2018-10-221-3/+0
| | | | Fixes #3641
* DC01 updates and I2C avr speed overwrite (#4088)yiancar2018-10-081-0/+2
| | | | | | | | | * DC01 updates and I2C avr speed overwrite - General updating of DC01 - Made F_SCL define in AVR I2C driver overwritable from config.h * Update drivers/avr/i2c_master.c
* RAMA M6-B and IS31FL3218 driver (#4021)Wilba65822018-09-302-0/+126
| | | | | | | | | | | | | | | | | | | | * Initial RAMA M6-B commit. * Moved IS31FL3218 driver, minor cleanups * Refactor, added dynamic keymap. * Added dynamic keymaps to RAMA M6-A * Refactor M6-A and M6-B to use common code. * Formatting * Cleanup * Cleanup * Changes from review
* RAMA U80-A, wilba.tech WT60-A, WT65-A, WT80-A, IS31FL3736 driver (#3925)Wilba65822018-09-272-0/+478
| | | | | | | | | | | | | | * Initial commit of RAMA U80-A * Initial commit of RAMA U80-A * Moved IS31FL3736 driver, minor cleanups * Superficial stuff * Review changes * Refactored to use common code.
* RGB Matrix refactoring to open up for new drivers (#3913)James Laird-Wah2018-09-272-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * rgb_matrix: use a driver ops struct This is intended to avoid #ifdef proliferation on adding more drivers, eg. model01, which use different architectures. * rgb_matrix: document driver struct members * rgb_matrix: remove unused LED testing code * rgb_matrix: don't build into IS31x drivers unless being used * rgb_matrix: refactor make config options This ensures that the necessary files are included for any custom RGB_MATRIX_ENABLE value, without having to add entries here for specific boards. This particularly affects model01 because its controller is integrated and won't be used anywhere else, so it's preferable not to put it in common_features.mk. This now validates the value of RGB_MATRIX_ENABLE. It was necessary to fix an error in ergodox_ez rules.mk using the wrong comment separator, yielding an invalid value. * IS31x drivers: don't write the control registers all the time This is only needed when they are changed. This is done in init() and board- or keymap-specific code is free to make further changes. * rgb_matrix: move structs from chip drivers to rgb_matrix_drivers.c This approach is specific to the rgb_matrix functionality, so keep it neatly separated from the raw chip drivers.
* ISSI31FL3733 driver (#3679)yiancar2018-08-286-41/+550
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * ISSI31FL3733 driver - Addapted IS31 driver for the above driver * fix my branch * ISSI31FL3733 driver - Inclusion of above ISSI led driver * IS31fl3733 driver - Added correct function for control registers * Finalized support for ISSI31fl3733 led driver - Finalized and tested driver. - Modified i2c_master for arm due to declaration mistake. - Fixed spaces/tabs in quantum.h file. - Fixed spaces/tabs in common_features.mk file. - Removed unnecessary includes from rgb_matrix.c file. - Added local definitions for MIN and MAX macros in rgb_matrix.c file. - Adjusted chevron effect. - Added necessary define (RGB_3733_MATRIX_ENABLE) for makefile. - Added necessary C define (ISSI3733) to aid with inclusion of the correct header file. - Added documentation for the new driver. * Driver structure update - Changed rule includes to be more condensed (RGB_MATRIX_ENABLE = IS31FL3731) and (RGB_MATRIX_ENABLE = IS31FL3733) - Updated documentation - Reverted to the use of differently named functions for each driver and selecting the needed ones within rgb_matrix.c * ISSI Drivers refractoring - Moved issi drivers in a dedicated folder - Updated documentation * I2C library fix I released the special pins incorrectly before. It is now fixed.
* Rgb matrix arm (#3648)yiancar2018-08-155-271/+422
| | | | | | | | | | | * Addition of I2C master driver for STM32, Generalization of ISSI3731 driver - Addition of an i2c_master driver for STM32 to replicate expectations of AVR driver. - Moved ISSI3731 driver one level up to make it accesible by both architectures. - Renamed ISSI3731 functions to a more general name for preparation of other ISSI drivers. - Added compiler directives where necessary to differenciate each architecture. * converted tabs to spaces
* DC01 keyboard addition (#3428)yiancar2018-07-184-142/+114
| | | | | | | | |