summaryrefslogtreecommitdiffstats
path: root/drivers/chibios
Commit message (Collapse)AuthorAgeFilesLines
* Add Full-duplex serial driver for ARM boards (#9842)Stefan Kerkmann2021-05-263-49/+359
|
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)Sergey Vlasov2021-04-251-6/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation
* Format code according to conventions (#12292)github-actions[bot]2021-03-191-9/+6
| | | Co-authored-by: QMK Bot <hello@qmk.fm>
* ARM WS2812 SPI config (baudrate and circular buffer) (#12216)Xelus222021-03-191-4/+40
| | | | | | | | | | | | | | | * initial commit * include circular buffer command * add endif * circular buffer mode * remove untrue comment * revamp and add documentation * do not allow WS2812_SPI_SYNC & CIRCULAR_BUFFER
* Add support for complementary outputs to the WS2812 PWM driver (#11988)Sergey Vlasov2021-03-021-1/+10
|
* Format code according to conventions (#11907)github-actions[bot]2021-02-151-1/+1
| | | Co-authored-by: QMK Bot <hello@qmk.fm>
* Add support for analog USBPD on STM32G4xx. (#11824)Nick Brassel2021-02-151-0/+76
| | | | | * Add support for analog USBPD on STM32G4xx. * Split up to a list of driver types, allow for custom.
* Format code according to conventions (#11905)github-actions[bot]2021-02-151-12/+3
| | | Co-authored-by: QMK Bot <hello@qmk.fm>
* UART driver refactor (#11637)Ryan2021-01-272-0/+136
|
* Merge remote-tracking branch 'origin/master' into developQMK Bot2021-01-153-0/+45
|\
| * Add BGR byte order for WS2812 drivers (#11562)kb-elmo2021-01-163-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | * add byte order bgr for ws2812 * update docs for driver change * Update ws2812_driver.md * Update docs/ws2812_driver.md Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
* | Merge remote-tracking branch 'upstream/master' into developNick Brassel2021-01-031-2/+8
|\|
| * Align ChibiOS spi_master behaviour with AVR (#11404)Ryan2021-01-031-2/+8
| | | | | | | | | | * Align ChibiOS spi_master behaviour with AVR * Rollback `spi_transmit()` and `spi_receive()` to preserve DMA
* | Merge remote-tracking branch 'upstream/master' into developfauxpark2020-12-182-7/+7
|\|
| * Run cformat and dos2unix manually (#11235)Ryan2020-12-172-7/+7
| |
* | Merge remote-tracking branch 'origin/master' into developQMK Bot2020-12-161-1/+1
|\|
| * Normalise include statements in keyboard code (#11185)Ryan2020-12-161-1/+1
| |
* | Merge remote-tracking branch 'origin/master' into developQMK Bot2020-12-117-9/+9
|\|
| * Normalise include statements in core code (#11153)Ryan2020-12-117-9/+9
| | | | | | | | | | * Normalise include statements in core code * Missed one
* | Merge remote-tracking branch 'origin/master' into developQMK Bot2020-12-063-3/+55
|\|
| * add definition WS2812_BYTE_ORDER to fix RGB LED issues (#10184)Josh Hinnebusch2020-12-063-3/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * add define for WS2812B-2020 to fix RGB issues * update driver doc * add WS2812_BYTE_ORDER definition to correct RGB byte issues * add definition variable thing * update per PR request * update per PR reqs * update per PR request * inital changes * move defines to color.h and add rgbw incase * Update docs/ws2812_driver.md Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: hineybush <hineybushkeyboards@gmail.com> Co-authored-by: Xelus22 <preyas22@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
* | Configurable serial usart timeout (#11057)XScorpion22020-11-301-5/+8
|/
* 2020 November 28 Breaking Changes Update (#11053)James Young2020-11-282-19/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
* Fix DMA stream ID calculation in ws2812_pwm (#10008)Sergey Vlasov2020-08-291-1/+1
| | | | | | | Some STM32 chips have STM32_DMA1_STREAM1 as the first DMA stream, others (F4xx, F7xx, H7xx) have STM32_DMA1_STREAM0. Instead of those names, use STM32_DMA_STREAM(0), which should always give the first stm32_dma_stream_t structure in the DMA streams array, so that the stream ID would be calculated correctly.
* Add support for DMAMUX-capable MCU configuration with WS2812 PWM driver. (#9471)Nick Brassel2020-08-291-0/+8
|
* Enable OLED support for Teensy 3.2/LC (#7591)Joel Challis2020-07-262-4/+13
| | | | | | | | | | | | | * I2C_TIMEOUT is not defined on arm teensy * Work round teensy having different ChibiOS config options * Stash OLED conf files * update comment * update comment * Remove stm32 alias to allow teensy alt mode
* format code according to conventions [skip ci]QMK Bot2020-06-201-1/+1
|
* Fix incorrect delay when setting WS2812 (and similar) leds (#9302)Joshua Diamond2020-06-204-22/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Fix incorrect delay when setting WS2812 (and similar) leds * Add documentation for WS2812_DELAY_MICROSECONDS * Remove improper cast to uint8_t Co-authored-by: Sergey Vlasov <sigprof@gmail.com> * Remove unneeded cast to uint8_t and correct math Co-authored-by: Sergey Vlasov <sigprof@gmail.com> * microseconds -> µs Co-authored-by: Ryan <fauxpark@gmail.com> * Make documentation better match the spec sheet. Co-authored-by: Ryan <fauxpark@gmail.com> * Rename macro to match spec sheet * Further correction to the delay maths for the SPI case. Co-authored-by: Joel Challis <git@zvecr.com> * Move ws2812_common.h to the drivers directory * Revert "Further correction to the delay maths for the SPI case." This reverts commit e61b56a2cfc7dfec9992a7a3af92afa50e5b8ec0. * Remove ws2812_setleds_pin(); consolidate ws2812.h Co-authored-by: Sergey Vlasov <sigprof@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com>
* STM32 WS2812 Open Drain Configuration (#9414)Xelus222020-06-203-11/+43
| | | | * update docs stm32 only and applies to all 3 driver * cformat
* Initial arm serial partially based on old lets split codezvecr2020-05-211-0/+290
|
* ARM split - Add uart half duplex transport support (#7987)Joel Challis2020-05-212-0/+296
| | | | | | | | | | | | | | | * ARM split - Add uart half duplex transport support * Fix for f103 * initial full duplex pass * partially remove full duplex * Correct speeds within driver docs Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>
* Add SPI master for ChibiOS/ARM. (#8779)Nick Brassel2020-04-292-0/+215
|
* Initial arm->chibios pass - simplify some platform logic (#8450)Joel Challis2020-03-218-0/+945
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 12:26:43 +0000