diff options
Diffstat (limited to 'users/manna-harbour_miryoku')
| l--------- | users/manna-harbour_miryoku/README.org | 1 | ||||
| -rw-r--r-- | users/manna-harbour_miryoku/config.h | 13 | ||||
| -rw-r--r-- | users/manna-harbour_miryoku/manna-harbour_miryoku.c | 56 | ||||
| -rw-r--r-- | users/manna-harbour_miryoku/miryoku.org | 609 | ||||
| -rw-r--r-- | users/manna-harbour_miryoku/rules.mk | 5 |
5 files changed, 684 insertions, 0 deletions
diff --git a/users/manna-harbour_miryoku/README.org b/users/manna-harbour_miryoku/README.org new file mode 120000 index 0000000000..b6caaade16 --- /dev/null +++ b/users/manna-harbour_miryoku/README.org @@ -0,0 +1 @@ +miryoku.org
\ No newline at end of file diff --git a/users/manna-harbour_miryoku/config.h b/users/manna-harbour_miryoku/config.h new file mode 100644 index 0000000000..c3c513d063 --- /dev/null +++ b/users/manna-harbour_miryoku/config.h @@ -0,0 +1,13 @@ + +// generated from users/manna-harbour_miryoku/miryoku.org + +#pragma once + +// Prevent normal rollover on alphas from accidentally triggering mods. +#define IGNORE_MOD_TAP_INTERRUPT + +// Enable rapid switch from tap to hold, disables double tap hold auto-repeat. +#define TAPPING_FORCE_HOLD + +// Recommended for heavy chording. +#define QMK_KEYS_PER_SCAN 4 diff --git a/users/manna-harbour_miryoku/manna-harbour_miryoku.c b/users/manna-harbour_miryoku/manna-harbour_miryoku.c new file mode 100644 index 0000000000..bb4770afc2 --- /dev/null +++ b/users/manna-harbour_miryoku/manna-harbour_miryoku.c @@ -0,0 +1,56 @@ + +// generated from users/manna-harbour_miryoku/miryoku.org + +#include QMK_KEYBOARD_H + +#define KC_NP KC_NO // key is not present +#define KC_NA KC_NO // present but not available for use +#define KC_NU KC_NO // available but not used +#define KC_RST RESET + +enum layers { BASE, MEDR, NAVR, MOUR, NSSL, NSL, FUNL }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT_miryoku( + KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, + LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_G, KC_M, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O), + KC_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, + KC_NP, KC_NP, LT(MEDR, KC_ESC), LT(NAVR, KC_SPC), LT(MOUR, KC_TAB), LT(NSSL, KC_ENT), LT(NSL, KC_BSPC), LT(FUNL, KC_DEL), KC_NP, KC_NP + ), + [NAVR] = LAYOUT_miryoku( + KC_RST, KC_NA, KC_NA, KC_NA, KC_NA, KC_AGIN, KC_UNDO, KC_CUT, KC_COPY, KC_PSTE, + KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_NA, KC_CAPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, + KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, KC_INS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, + KC_NP, KC_NP, KC_NA, KC_NA, KC_NA, KC_ENT, KC_BSPC, KC_DEL, KC_NP, KC_NP + ), + [MOUR] = LAYOUT_miryoku( + KC_RST, KC_NA, KC_NA, KC_NA, KC_NA, KC_NU, KC_NU, KC_NU, KC_NU, KC_NU, + KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_NA, KC_NU, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, + KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, KC_NU, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, + KC_NP, KC_NP, KC_NA, KC_NA, KC_NA, KC_BTN3, KC_BTN1, KC_BTN2, KC_NP, KC_NP + ), + [MEDR] = LAYOUT_miryoku( + KC_RST, KC_NA, KC_NA, KC_NA, KC_NA, KC_NU, KC_NU, KC_NU, KC_NU, KC_NU, + KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_NA, KC_NU, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, + KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, KC_NU, KC_NU, KC_NU, KC_NU, KC_NU, + KC_NP, KC_NP, KC_NA, KC_NA, KC_NA, KC_MSTP, KC_MPLY, KC_MUTE, KC_NP, KC_NP + ), + [FUNL] = LAYOUT_miryoku( + KC_F12, KC_F7, KC_F8, KC_F9, KC_PSCR, KC_NA, KC_NA, KC_NA, KC_NA, KC_RST, + KC_F11, KC_F4, KC_F5, KC_F6, KC_SLCK, KC_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, + KC_F10, KC_F1, KC_F2, KC_F3, KC_PAUS, KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, + KC_NP, KC_NP, KC_APP, KC_SPC, KC_TAB, KC_NA, KC_NA, KC_NA, KC_NP, KC_NP + ), + [NSL] = LAYOUT_miryoku( + KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, KC_NA, KC_NA, KC_NA, KC_NA, KC_RST, + KC_SCLN, KC_4, KC_5, KC_6, KC_EQL, KC_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, + KC_GRV, KC_1, KC_2, KC_3, KC_BSLS, KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, + KC_NP, KC_NP, KC_DOT, KC_0, KC_MINS, KC_NA, KC_NA, KC_NA, KC_NP, KC_NP + ), + [NSSL] = LAYOUT_miryoku( + KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, KC_NA, KC_NA, KC_NA, KC_NA, KC_RST, + KC_COLN, KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, KC_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_PIPE, KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, + KC_NP, KC_NP, KC_GT, KC_RPRN, KC_UNDS, KC_NA, KC_NA, KC_NA, KC_NP, KC_NP + ) +}; diff --git a/users/manna-harbour_miryoku/miryoku.org b/users/manna-harbour_miryoku/miryoku.org new file mode 100644 index 0000000000..556f95f60e --- /dev/null +++ b/users/manna-harbour_miryoku/miryoku.org @@ -0,0 +1,609 @@ +#+Title: miryoku.org + +The miryoku layout is an ergonomic, minimal, orthogonal layout for ergo or ortho +keyboards, implemented as part of the QMK firmware. The layout is maintained in +emacs org-mode tables and converted to QMK keymap data structures using embedded +python scripts. The layout is mapped onto keyboards with different physical +layouts as a subset without code duplication using the QMK userland feature and +C macros. Versions of the layout can also be seen outside of the QMK source at +[[https://github.com/manna-harbour/miryoku/]]. + +* Contents + +- [[#layout][Layout]] +- [[#code-generation][Code Generation]] +- [[#subset-mapping][Subset Mapping]] + + +* Layout +:PROPERTIES: +:CUSTOM_ID: layout +:END: + +** Info + +*** General Principles + + - Use layers instead of reaching. + - Use both hands instead of contortions. + - Use the home positions as much as possible. + - Make full use of the thumbs. + - Avoid unnecessary complication. + + +*** Specifics + + - 5 columns, 3 rows, 3 thumb keys, 2 hands. + - Can be used on almost any split or non-split ergo or ortho keyboard. + - Includes all keys found on a US layout TKL keyboard, plus media keys and + mouse emulation. + - Home row is the middle row, home thumb key is the middle thumb key. + - Maximum 1-u movement from home position for fingers and thumbs, and only + along one axis (except for the inner index finger column which is + deprioritised compared with the home columns). + - Dual-function modifiers on home row, mirrored on both hands. + - Dual-function layer change on thumbs. + - Layers are designed orthogonally with a single purpose per hand and are + accessed by holding a thumb key on the opposite hand. + - Holding layer change and modifiers on one hand combined with a single key + press on the other hand can produce any combination of modifiers and + single keys without any finger contortions. + - Single function mods are also defined on layers on the same hand as the + layer change thumb key so layer change and mods can be held in any order + or simultaneously without race conditions. + - As mods are only enabled on the opposite hand, auto-repeat is available on + the home row on layers for use with cursor and mouse keys. + - Tap-hold auto-repeat is disabled to enable faster tap-hold switching on + thumbs but thumb tap keys are mirrored onto some layers for use with + auto-repeat. + + +** Layers + +The layers are maintained in tables, with the thumb keys on the bottom row. NP +indicates the key is not present and is used to fill in the table around the +thumb keys. The grid arrangement of the tables does not imply a particular +physical layout. + +Basic keycodes are entered without the KC_ prefix. Symbols can be entered as-is +(excepting '"' (DQUO) and '|' (PIPE)). Empty cells are unused. + +The base layer has both halves of the layout joined for convenience. Other +layers are specified as a single hand. + +*** Base (BASE) + + +The base layer is maintained as separate tap and hold tables and are combined +into the corresponding tap-hold keycodes for mods and layer change. RST and +mods will be available on sub layers on the same hand as the layer change thumb +key. Unknown names are considered to be layer names. + +Base layer alphas are Colemak DHm. Thumb keys are backspace, enter, delete on +the right and space, tab, escape on the left. Dot, comma and apostrophe are +included for prose, dot and slash for file and directory names. + +#+NAME: tap +| Q | W | F | P | B | J | L | U | Y | ' | +| A | R | S | T | G | M | N | E | I | O | +| Z | X | C | D | V | K | H | , | . | / | +| NP | NP | ESC | SPC | TAB | ENT | BSPC | DEL | NP | NP | + +#+NAME: hold +| RST | | | | | | | | | RST | +| LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI | +| | | | | | | | | | | +| NP | NP | MEDR | NAVR | MOUR | NSSL | NSL | FUNL | NP | NP | + + +*** Navigation (NAVR) + +Primary right-hand layer (left home thumb) is navigation and editing. Cursor +keys are on the home position, line and page movement below, clipboard above, +caps and insert on the inner column. Thumb keys are duplicated from the base +layer to avoid having to layer change mid edit and to enable auto-repeat. + +#+NAME: navr +| AGIN | UNDO | CUT | COPY | PSTE | +| CAPS | LEFT | DOWN | UP | RGHT | +| INS | HOME | PGDN | PGUP | END | +| ENT | BSPC | DEL | NP | NP | + + +*** Mouse (MOUR) + +Secondary RH layer is mouse emulation. Mouse movement mirrors cursor navigation +on home and wheel mirrors line / page movement below. Buttons are on the +thumbs. Mouse movement, click, and drag with modifiers can be performed from +the home position. Unused keys are available for other related functions. + +#+NAME: mour +| | | | | | +| | MS_L | MS_D | MS_U | MS_R | +| | WH_L | WH_D | WH_U | WH_R | +| BTN3 | BTN1 | BTN2 | NP | NP | + + +*** Media (MEDR) + +Tertiary RH layer is media control, with volume up / down and next / prev +mirroring the navigation keys. Pause, stop and mute are on thumbs. Unused keys +are available for other related functions. + +#+NAME: medr +| | | | | | +| | MPRV | VOLD | VOLU | MNXT | +| | | | | | +| MSTP | MPLY | MUTE | NP | NP | + + +*** Numerals and Symbols (NSL) + +Primary left-hand layer (right home thumb) is numerals and symbols. Numerals +are in the standard numpad locations with symbols in the remaining positions. +Dot is duplicated from the base layer for convenience. + +#+NAME: nsl +| [ | 7 | 8 | 9 | ] | +| ; | 4 | 5 | 6 | = | +| ` | 1 | 2 | 3 | \ | +| NP | NP | . | 0 | - | + + +*** Shifted Numerals and Symbols (NSSL) + +Secondary LH layer has shifted symbols in the same locations to reduce chording +when using mods with shifted symbols. Automatically generated from unshifted +table. + + +*** Function and System (FUNL) + +Tertiary LH layer has function keys mirroring the numerals on the primary layer +with extras on the pinkie column, plus system keys on the inner column. App +(menu) is on the tertiary thumb key and other thumb keys are duplicated from the +base layer to enable auto-repeat. + + +#+NAME: funl +| F12 | F7 | F8 | F9 | PSCR | +| F11 | F4 | F5 | F6 | SLCK | +| F10 | F1 | F2 | F3 | PAUS | +| NP | NP | APP | SPC | TAB | + + +*** COMMENT Templates + +#+NAME: tem +| <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | +|------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | +| | | | | | | | | | | +| | | | | | | | | | | +| NP | NP | | | | | | | NP | NP | + + +Duplicate base layer tap keys on thumbs rather than trans to enable auto-repeat. + +#+NAME: temr +| <l4> | <l4> | <l4> | <l4> | <l4> | +|------+------+------+------+------| +| | | | | | +| | | | | | +| | | | | | +| ENT | BSPC | DEL | NP | NP | + +#+NAME: teml +| <l4> | <l4> | <l4> | <l4> | <l4> | +|------+------+------+------+------| +| | | | | | +| | | | | | +| | | | | | +| NP | NP | ESC | SPC | TAB | + + +* Code Generation +:PROPERTIES: +:CUSTOM_ID: code-generation +:END: + +** Table Conversion Scripts + +*** table-layout-taphold + +Produce base layer from separate tap and hold tables. + +#+NAME: table-layout-taphold +#+BEGIN_SRC python :var tap_table=tap :var hold_table=hold :var symbol_names_table=symbol-names :var mods_list=mods :tangle no :results verbatim +width = 19 +mods_dict = dict.fromkeys(mods_list) +symbol_names_dict = {} +for symbol, name, shifted_symbol, shifted_name in symbol_names_table: + symbol_names_dict[symbol] = name + symbol_names_dict[shifted_symbol] = shifted_name +results = ' [BASE] = LAYOUT_miryoku(\n' +for tap_row, hold_row in map(None, tap_table, hold_table): + results += ' ' + for tap, hold in map(None, tap_row, hold_row): + if tap == '': + code = 'NU' + elif tap in symbol_names_dict: + code = symbol_names_dict[tap] + else: + code = tap + code = 'KC_' + str(code) + if hold in mods_dict: + code = str(hold) + '_T(' + code + ')' + elif hold != '' and hold != 'NP' and hold != 'RST': + code = 'LT(' + str(hold) + ', ' + code + ')' + results += (code + ', ').ljust(width) + results = results.rstrip(' ') + '\n' +results = results.rstrip('\n, ') + '\n )' +return results +#+END_SRC + +#+RESULTS: table-layout-taphold +: [BASE] = LAYOUT_miryoku( +: KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, +: LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_G, KC_M, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O), +: KC_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, +: KC_NP, KC_NP, LT(MEDR, KC_ESC), LT(NAVR, KC_SPC), LT(MOUR, KC_TAB), LT(NSSL, KC_ENT), LT(NSL, KC_BSPC), LT(FUNL, KC_DEL), KC_NP, KC_NP +: ) + + +*** table-layout-half + +Produce sub layers given layer name and corresponding table for single hand and +incorporating mods and reset from base layer. Layer names must end with R or L. +A layer with shifted symbols can also be generated. + +#+NAME: table-layout-half +#+BEGIN_SRC python :var hold_table=hold :var layer_name="NSL" :var half_table=nsl :var symbol_names_table=symbol-names :var mods_list=mods :var shift="false" :tangle no :results verbatim +width = 9 +mods_dict = dict.fromkeys(mods_list) +symbol_names_dict = {} +shifted_symbol_names_dict = {} +for symbol, name, shifted_symbol, shifted_name in symbol_names_table: + symbol_names_dict[symbol] = name + symbol_names_dict[shifted_symbol] = shifted_name + shifted_symbol_names_dict[symbol] = shifted_name +length = len(half_table[0]) +mode = layer_name[-1:].lower() +results = ' [' + layer_name + '] = LAYOUT_miryoku(\n' +for half_row, hold_row in map(None, half_table, hold_table): + results += ' ' + hold_row_l, hold_row_r = hold_row[:length], hold_row[length:] + for lr, hold_row_lr in ('l', hold_row_l), ('r', hold_row_r): + if lr == mode: + for half in half_row: + if half == '': + code = 'NU' + elif shift == "true" and half in shifted_symbol_names_dict: + code = shifted_symbol_names_dict[half] + elif half in symbol_names_dict: + code = symbol_names_dict[half] + else: + code = half + results += ('KC_' + str(code) + ', ').ljust(width) + else: + for hold in hold_row_lr: + if hold == '' or hold != 'NP' and hold != 'RST' and hold not in mods_dict: + code = 'NA' + else: + code = hold + results += ('KC_' + str(code) + ', ').ljust(width) + results = results.rstrip(' ') + '\n' +results = results.rstrip('\n, ') + '\n )' +return results +#+END_SRC + +#+RESULTS: table-layout-half +: [NSL] = LAYOUT_miryoku( +: KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, KC_NA, KC_NA, KC_NA, KC_NA, KC_RST, +: KC_SCLN, KC_4, KC_5, KC_6, KC_EQL, KC_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, +: KC_GRV, KC_1, KC_2, KC_3, KC_BSLS, KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, +: KC_NP, KC_NP, KC_DOT, KC_0, KC_MINS, KC_NA, KC_NA, KC_NA, KC_NP, KC_NP +: ) + + +*** table-enums + +Produce layer enums from layer names in hold table. + +#+NAME: table-enums +#+BEGIN_SRC python :var hold_table=hold :var mods_list=mods :tangle no +mods_dict = dict.fromkeys(mods_list) +results = 'enum layers { BASE, ' +for hold_row in hold_table: + for hold in hold_row: + if hold not in mods_dict and hold != '' and hold != 'NP' and hold != 'RST': + results += hold + ', ' +results = results.rstrip(', ') + ' };' +return results +#+END_SRC + +#+RESULTS: table-enums +: enum layers { BASE, MEDR, NAVR, MOUR, NSSL, NSL, FUNL }; + + +** Data + +*** symbol-names + +Symbol, name, and shifted symbol mappings for use in tables. + +#+NAME: symbol-names +| ` | GRV | ~ | TILD | +| - | MINS | _ | UNDS | +| = | EQL | + | PLUS | +| [ | LBRC | { | LCBR | +| ] | RBRC | } | RCBR | +| \ | BSLS | PIPE | PIPE | +| ; | SCLN | : | COLN | +| ' | QUOT | DQUO | DQUO | +| , | COMM | < | LT | +| . | DOT | > | GT | +| / | SLSH | ? | QUES | +| 1 | 1 | ! | EXLM | +| 2 | 2 | @ | AT | +| 3 | 3 | # | HASH | +| 4 | 4 | $ | DLR | +| 5 | 5 | % | PERC | +| 6 | 6 | ^ | CIRC | +| 7 | 7 | & | AMPR | +| 8 | 8 | * | ASTR | +| 9 | 9 | ( | LPRN | +| 0 | 0 | ) | RPRN | + + +*** mods + +Modifiers usable in hold table. Need to have the same name for KC_ and _T versions. + +#+NAME: mods +- LSFT +- LCTL +- LALT +- LGUI +- LAGR + + +** Other + +*** header + +Header for tangled src files. + +#+NAME: header +#+BEGIN_SRC C :tangle no +generated from users/manna-harbour_miryoku/miryoku.org +#+END_SRC + + +* Subset Mapping +:PROPERTIES: +:CUSTOM_ID: subset-mapping +:END: + +** Userspace + +The keymap and configuration are shared between keyboards. The keymap is +defined for LAYOUT_miryoku which is 10x4, with the outer 2 positions on the +bottom row unused and the rest of the bottom row are the thumb keys. + + +*** manna-harbour_miryoku.c + +Contains the keymap. Included from keymap.c + +[[./manna-harbour_miryoku.c][users/manna-harbour_miryoku/manna-harbour_miryoku.c]] +#+BEGIN_SRC C :noweb yes :tangle manna-harbour_miryoku.c + +// <<header>> + +#include QMK_KEYBOARD_H + +#define KC_NP KC_NO // key is not present +#define KC_NA KC_NO // present but not available for use +#define KC_NU KC_NO // available but not used +#define KC_RST RESET + +<<table-enums()>> + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +<<table-layout-taphold()>>, +<<table-layout-half(layer_name="NAVR", half_table=navr)>>, +<<table-layout-half(layer_name="MOUR", half_table=mour)>>, +<<table-layout-half(layer_name="MEDR", half_table=medr)>>, +<<table-layout-half(layer_name="FUNL", half_table=funl)>>, +<<table-layout-half(layer_name="NSL", half_table=nsl)>>, +<<table-layout-half(layer_name="NSSL", half_table=nsl, shift="true")>> +}; +#+END_SRC + + +*** config.h + +Config options. Automatically included. + +[[./config.h][users/manna-harbour_miryoku/config.h]] +#+BEGIN_SRC C :noweb yes :tangle config.h + +// <<header>> + +#pragma once + +// Prevent normal rollover on alphas from accidentally triggering mods. +#define IGNORE_MOD_TAP_INTERRUPT + +// Enable rapid switch from tap to hold, disables double tap hold auto-repeat. +#define TAPPING_FORCE_HOLD + +// Recommended for heavy chording. +#define QMK_KEYS_PER_SCAN 4 + +#+END_SRC + + +*** rules.mk + +Build options. Automatically included. + +[[./rules.mk][users/manna-harbour_miryoku/rules.mk]] +#+BEGIN_SRC makefile :noweb yes :tangle rules.mk + +# <<header>> + +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) + +#+END_SRC + + +** Layouts + +To use the keymap on a keyboard supporting the layouts feature, LAYOUT_miryoku +is defined as a macro mapping onto the layout's own LAYOUT macro, leaving the +unused keys as KC_NO. The userspace keymap is then included. + +*** ergodox + +For the ergodox layout, the main 5x3 alphas are used as usual. The primary and +secondary thumb keys are the inner and outer 2u thumb keys and the tertiary +thumb key is the innermost key of the partial bottom row. The remaining keys +are unused. + +[[../../layouts/community/ergodox/manna-harbour_miryoku/keymap.c][layouts/community/ergodox/manna-harbour_miryoku/keymap.c]] +#+BEGIN_SRC C :noweb yes :tangle ../../layouts/community/ergodox/manna-harbour_miryoku/keymap.c + +// <<header>> + +#define LAYOUT_miryoku(\ +K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ +K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ +K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ +N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\ +)\ +LAYOUT_ergodox_pretty( \ +KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ +KC_NO, K00, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, K09, KC_NO, \ +KC_NO, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, \ +KC_NO, K20, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K29, KC_NO, \ +KC_NO, KC_NO, KC_NO, KC_NO, K32, K37, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, \ + K33, K34, KC_NO, KC_NO, K35, K36 \ +) + +#include "manna-harbour_miryoku.c" + +#+END_SRC + +To build for any keyboard using the this layout (ergodone, ergodox_ez, +ergodox_infinity, hotdox) e.g. the ergodox_ez, + +#+BEGIN_SRC sh :tangle no +cd ../.. && make ergodox_ez:manna-harbour_miryoku:teensy +#+END_SRC + + + +*** ortho_4x12 + +For the ortho_4x12 layout, the right half as is as follows: The rightmost column +bottom 3 rows is the pinkie column. The middle 4 columns top 3 rows are for the +remaining fingers. The bottom row left 3 columns are the thumb keys. The +remaining keys are unused. + +[[../../layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c][layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c]] +#+BEGIN_SRC C :noweb yes :tangle ../../layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c + +// <<header>> + +#define LAYOUT_miryoku(\ +K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ +K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ +K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ +N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\ +)\ +LAYOUT_ortho_4x12(\ +KC_NO, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, KC_NO,\ +K00, K11, K12, K13, K14, KC_NO, KC_NO, K15, K16, K17, K18, K09,\ +K10, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K19,\ +K20, KC_NO, KC_NO, K32, K33, K34, K35, K36, K37, KC_NO, KC_NO, K29\ +) + +#include "manna-harbour_miryoku.c" + +#+END_SRC + +To build for any keyboard using this layout (4x4, nori, chimera_ls, contra, +divergetm2, jj40, lets_split, lets_split_eh, meira, niu_mini, planck, telophase, +vitamins_included, zinc, zlant, ortho48, kbd4x, levinson, wavelet, plaid) +e.g. the levinson, + +#+BEGIN_SRC sh :tangle no +make keebio/levinson:manna-harbour_miryoku:avrdude +#+END_SRC + + +** Keyboards + +To use the keymap on a keyboard which does not support the layouts feature, +LAYOUT_miryoku is defined as a macro mapping onto the keyboard's own LAYOUT +macro, leaving the unused keys as KC_NO. The userspace keymap is then included. + + +*** crkbd + +The outer columns are unused. + +[[../../keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c][keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c]] +#+BEGIN_SRC C :noweb yes :tangle ../../keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c + +// <<header>> + +#define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT( \ +KC_NO, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_NO, \ +KC_NO, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, \ +KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_NO, \ + K32, K33, K34, K35, K36, K37 \ +) + +#include "manna-harbour_miryoku.c" + +#+END_SRC + +To build for this keyboard, + +#+BEGIN_SRC sh :tangle no +cd ../.. && make crkbd:manna-harbour_miryoku:avrdude +#+END_SRC + + +* Related Documentation + +** QMK + +- https://qmk.fm/ +- https://docs.qmk.fm/#/getting_started_introduction +- https://docs.qmk.fm/#/hardware_keyboard_guidelines +- https://docs.qmk.fm/#/config_options +- https://docs.qmk.fm/#/keycodes +- https://docs.qmk.fm/#/feature_advanced_keycodes +- https://docs.qmk.fm/#/feature_layouts +- https://docs.qmk.fm/#/feature_userspace +- https://docs.qmk.fm/#/getting_started_make_guide + + +** Org Mode + +- https://orgmode.org/ +- https://orgmode.org/manual/Tables.html +- https://orgmode.org/manual/Working-with-Source-Code.html diff --git a/users/manna-harbour_miryoku/rules.mk b/users/manna-harbour_miryoku/rules.mk new file mode 100644 index 0000000000..baff1431f0 --- /dev/null +++ b/users/manna-harbour_miryoku/rules.mk @@ -0,0 +1,5 @@ + +# generated from users/manna-harbour_miryoku/miryoku.org + +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) |