diff options
Diffstat (limited to 'tmk_core')
-rw-r--r-- | tmk_core/protocol/arm_atsam/md_rgb_matrix.c | 2 | ||||
-rw-r--r-- | tmk_core/protocol/chibios/usb_main.c | 136 | ||||
-rw-r--r-- | tmk_core/protocol/host.c | 5 | ||||
-rw-r--r-- | tmk_core/protocol/report.h | 18 | ||||
-rw-r--r-- | tmk_core/protocol/serial.h | 46 | ||||
-rw-r--r-- | tmk_core/protocol/serial_soft.c | 234 | ||||
-rw-r--r-- | tmk_core/protocol/serial_uart.c | 133 | ||||
-rw-r--r-- | tmk_core/protocol/usb_descriptor.c | 15 | ||||
-rw-r--r-- | tmk_core/protocol/usb_descriptor.h | 15 | ||||
-rw-r--r-- | tmk_core/protocol/vusb/vusb.c | 16 |
10 files changed, 126 insertions, 494 deletions
diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c index 3ed83a44a6..52fe86d297 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c @@ -450,7 +450,7 @@ static void md_rgb_matrix_config_override(int i) { float bo = 0; float po; - uint8_t highest_active_layer = biton32(layer_state); + uint8_t highest_active_layer = get_highest_layer(layer_state); if (led_animation_circular) { // TODO: should use min/max values from LED configuration instead of diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index 19e2e858fc..eb9ef82554 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -32,6 +32,7 @@ #include "usb_main.h" #include "host.h" +#include "chibios_config.h" #include "debug.h" #include "suspend.h" #ifdef SLEEP_LED_ENABLE @@ -91,6 +92,13 @@ uint8_t extra_report_blank[3] = {0}; * --------------------------------------------------------- */ +/* USB Low Level driver specific endpoint fields */ +#if !defined(usb_lld_endpoint_fields) +# define usb_lld_endpoint_fields \ + 2, /* IN multiplier */ \ + NULL, /* SETUP buffer (not a SETUP endpoint) */ +#endif + /* HID specific constants */ #define HID_GET_REPORT 0x01 #define HID_GET_IDLE 0x02 @@ -121,16 +129,15 @@ static const USBDescriptor *usb_get_descriptor_cb(USBDriver *usbp, uint8_t dtype static USBInEndpointState kbd_ep_state; /* keyboard endpoint initialization structure (IN) - see USBEndpointConfig comment at top of file */ static const USBEndpointConfig kbd_ep_config = { - USB_EP_MODE_TYPE_INTR, /* Interrupt EP */ - NULL, /* SETUP packet notification callback */ - kbd_in_cb, /* IN notification callback */ - NULL, /* OUT notification callback */ - KEYBOARD_EPSIZE, /* IN maximum packet size */ - 0, /* OUT maximum packet size */ - &kbd_ep_state, /* IN Endpoint state */ - NULL, /* OUT endpoint state */ - 2, /* IN multiplier */ - NULL /* SETUP buffer (not a SETUP endpoint) */ + USB_EP_MODE_TYPE_INTR, /* Interrupt EP */ + NULL, /* SETUP packet notification callback */ + kbd_in_cb, /* IN notification callback */ + NULL, /* OUT notification callback */ + KEYBOARD_EPSIZE, /* IN maximum packet size */ + 0, /* OUT maximum packet size */ + &kbd_ep_state, /* IN Endpoint state */ + NULL, /* OUT endpoint state */ + usb_lld_endpoint_fields /* USB driver specific endpoint fields */ }; #endif @@ -140,16 +147,15 @@ static USBInEndpointState mouse_ep_state; /* mouse endpoint initialization structure (IN) - see USBEndpointConfig comment at top of file */ static const USBEndpointConfig mouse_ep_config = { - USB_EP_MODE_TYPE_INTR, /* Interrupt EP */ - NULL, /* SETUP packet notification callback */ - mouse_in_cb, /* IN notification callback */ - NULL, /* OUT notification callback */ - MOUSE_EPSIZE, /* IN maximum packet size */ - 0, /* OUT maximum packet size */ - &mouse_ep_state, /* IN Endpoint state */ - NULL, /* OUT endpoint state */ - 2, /* IN multiplier */ - NULL /* SETUP buffer (not a SETUP endpoint) */ + USB_EP_MODE_TYPE_INTR, /* Interrupt EP */ + NULL, /* SETUP packet notification callback */ + mouse_in_cb, /* IN notification callback */ + NULL, /* OUT notification callback */ + MOUSE_EPSIZE, /* IN maximum packet size */ + 0, /* OUT maximum packet size */ + &mouse_ep_state, /* IN Endpoint state */ + NULL, /* OUT endpoint state */ + usb_lld_endpoint_fields /* USB driver specific endpoint fields */ }; #endif @@ -159,20 +165,19 @@ static USBInEndpointState shared_ep_state; /* shared endpoint initialization structure (IN) - see USBEndpointConfig comment at top of file */ static const USBEndpointConfig shared_ep_config = { - USB_EP_MODE_TYPE_INTR, /* Interrupt EP */ - NULL, /* SETUP packet notification callback */ - shared_in_cb, /* IN notification callback */ - NULL, /* OUT notification callback */ - SHARED_EPSIZE, /* IN maximum packet size */ - 0, /* OUT maximum packet size */ - &shared_ep_state, /* IN Endpoint state */ - NULL, /* OUT endpoint state */ - 2, /* IN multiplier */ - NULL /* SETUP buffer (not a SETUP endpoint) */ + USB_EP_MODE_TYPE_INTR, /* Interrupt EP */ + NULL, /* SETUP packet notification callback */ + shared_in_cb, /* IN notification callback */ + NULL, /* OUT notification callback */ + SHARED_EPSIZE, /* IN maximum packet size */ + 0, /* OUT maximum packet size */ + &shared_ep_state, /* IN Endpoint state */ + NULL, /* OUT endpoint state */ + usb_lld_endpoint_fields /* USB driver specific endpoint fields */ }; #endif -#if STM32_USB_USE_OTG1 +#ifdef USB_ENDPOINTS_ARE_REORDERABLE typedef struct { size_t queue_capacity_in; size_t queue_capacity_out; @@ -199,23 +204,22 @@ typedef struct { } usb_driver_config_t; #endif -#if STM32_USB_USE_OTG1 +#ifdef USB_ENDPOINTS_ARE_REORDERABLE /* Reusable initialization structure - see USBEndpointConfig comment at top of file */ # define QMK_USB_DRIVER_CONFIG(stream, notification, fixedsize) \ { \ .queue_capacity_in = stream##_IN_CAPACITY, .queue_capacity_out = stream##_OUT_CAPACITY, \ .inout_ep_config = \ { \ - stream##_IN_MODE, /* Interrupt EP */ \ - NULL, /* SETUP packet notification callback */ \ - qmkusbDataTransmitted, /* IN notification callback */ \ - qmkusbDataReceived, /* OUT notification callback */ \ - stream##_EPSIZE, /* IN maximum packet size */ \ - stream##_EPSIZE, /* OUT maximum packet size */ \ - NULL, /* IN Endpoint state */ \ - NULL, /* OUT endpoint state */ \ - 2, /* IN multiplier */ \ - NULL /* SETUP buffer (not a SETUP endpoint) */ \ + stream##_IN_MODE, /* Interrupt EP */ \ + NULL, /* SETUP packet notification callback */ \ + qmkusbDataTransmitted, /* IN notification callback */ \ + qmkusbDataReceived, /* OUT notification callback */ \ + stream##_EPSIZE, /* IN maximum packet size */ \ + stream##_EPSIZE, /* OUT maximum packet size */ \ + NULL, /* IN Endpoint state */ \ + NULL, /* OUT endpoint state */ \ + usb_lld_endpoint_fields /* USB driver specific endpoint fields */ \ }, \ .int_ep_config = \ { \ @@ -227,8 +231,7 @@ typedef struct { 0, /* OUT maximum packet size */ \ NULL, /* IN Endpoint state */ \ NULL, /* OUT endpoint state */ \ - 2, /* IN multiplier */ \ - NULL, /* SETUP buffer (not a SETUP endpoint) */ \ + usb_lld_endpoint_fields /* USB driver specific endpoint fields */ \ }, \ .config = { \ .usbp = &USB_DRIVER, \ @@ -251,29 +254,27 @@ typedef struct { .queue_capacity_in = stream##_IN_CAPACITY, .queue_capacity_out = stream##_OUT_CAPACITY, \ .in_ep_config = \ { \ - stream##_IN_MODE, /* Interrupt EP */ \ - NULL, /* SETUP packet notification callback */ \ - qmkusbDataTransmitted, /* IN notification callback */ \ - NULL, /* OUT notification callback */ \ - stream##_EPSIZE, /* IN maximum packet size */ \ - 0, /* OUT maximum packet size */ \ - NULL, /* IN Endpoint state */ \ - NULL, /* OUT endpoint state */ \ - 2, /* IN multiplier */ \ - NULL /* SETUP buffer (not a SETUP endpoint) */ \ + stream##_IN_MODE, /* Interrupt EP */ \ + NULL, /* SETUP packet notification callback */ \ + qmkusbDataTransmitted, /* IN notification callback */ \ + NULL, /* OUT notification callback */ \ + stream##_EPSIZE, /* IN maximum packet size */ \ + 0, /* OUT maximum packet size */ \ + NULL, /* IN Endpoint state */ \ + NULL, /* OUT endpoint state */ \ + usb_lld_endpoint_fields /* USB driver specific endpoint fields */ \ }, \ .out_ep_config = \ { \ - stream##_OUT_MODE, /* Interrupt EP */ \ - NULL, /* SETUP packet notification callback */ \ - NULL, /* IN notification callback */ \ - qmkusbDataReceived, /* OUT notification callback */ \ - 0, /* IN maximum packet size */ \ - stream##_EPSIZE, /* OUT maximum packet size */ \ - NULL, /* IN Endpoint state */ \ - NULL, /* OUT endpoint state */ \ - 2, /* IN multiplier */ \ - NULL, /* SETUP buffer (not a SETUP endpoint) */ \ + stream##_OUT_MODE, /* Interrupt EP */ \ + NULL, /* SETUP packet notification callback */ \ + NULL, /* IN notification callback */ \ + qmkusbDataReceived, /* OUT notification callback */ \ + 0, /* IN maximum packet size */ \ + stream##_EPSIZE, /* OUT maximum packet size */ \ + NULL, /* IN Endpoint state */ \ + NULL, /* OUT endpoint state */ \ + usb_lld_endpoint_fields /* USB driver specific endpoint fields */ \ }, \ .int_ep_config = \ { \ @@ -285,8 +286,7 @@ typedef struct { 0, /* OUT maximum packet size */ \ NULL, /* IN Endpoint state */ \ NULL, /* OUT endpoint state */ \ - 2, /* IN multiplier */ \ - NULL, /* SETUP buffer (not a SETUP endpoint) */ \ + usb_lld_endpoint_fields /* USB driver specific endpoint fields */ \ }, \ .config = { \ .usbp = &USB_DRIVER, \ @@ -488,7 +488,7 @@ static void usb_event_cb(USBDriver *usbp, usbevent_t event) { usbInitEndpointI(usbp, SHARED_IN_EPNUM, &shared_ep_config); #endif for (int i = 0; i < NUM_USB_DRIVERS; i++) { -#if STM32_USB_USE_OTG1 +#ifdef USB_ENDPOINTS_ARE_REORDERABLE usbInitEndpointI(usbp, drivers.array[i].config.bulk_in, &drivers.array[i].inout_ep_config); #else usbInitEndpointI(usbp, drivers.array[i].config.bulk_in, &drivers.array[i].in_ep_config); @@ -715,7 +715,7 @@ static const USBConfig usbcfg = { */ void init_usb_driver(USBDriver *usbp) { for (int i = 0; i < NUM_USB_DRIVERS; i++) { -#if STM32_USB_USE_OTG1 +#ifdef USB_ENDPOINTS_ARE_REORDERABLE QMKUSBDriver *driver = &drivers.array[i].driver; drivers.array[i].inout_ep_config.in_state = &drivers.array[i].in_ep_state; drivers.array[i].inout_ep_config.out_state = &drivers.array[i].out_ep_state; diff --git a/tmk_core/protocol/host.c b/tmk_core/protocol/host.c index 053d2b79e3..3d8604d541 100644 --- a/tmk_core/protocol/host.c +++ b/tmk_core/protocol/host.c @@ -94,6 +94,11 @@ void host_mouse_send(report_mouse_t *report) { #ifdef MOUSE_SHARED_EP report->report_id = REPORT_ID_MOUSE; #endif +#ifdef MOUSE_EXTENDED_REPORT + // clip and copy to Boot protocol XY + report->boot_x = (report->x > 127) ? 127 : ((report->x < -127) ? -127 : report->x); + report->boot_y = (report->y > 127) ? 127 : ((report->y < -127) ? -127 : report->y); +#endif (*driver->send_mouse)(report); } diff --git a/tmk_core/protocol/report.h b/tmk_core/protocol/report.h index 7bbeb78af7..735ccdb4a1 100644 --- a/tmk_core/protocol/report.h +++ b/tmk_core/protocol/report.h @@ -201,15 +201,25 @@ typedef struct { uint32_t usage; } __attribute__((packed)) report_programmable_button_t; +#ifdef MOUSE_EXTENDED_REPORT +typedef int16_t mouse_xy_report_t; +#else +typedef int8_t mouse_xy_report_t; +#endif + typedef struct { #ifdef MOUSE_SHARED_EP uint8_t report_id; #endif uint8_t buttons; - int8_t x; - int8_t y; - int8_t v; - int8_t h; +#ifdef MOUSE_EXTENDED_REPORT + int8_t boot_x; + int8_t boot_y; +#endif + mouse_xy_report_t x; + mouse_xy_report_t y; + int8_t v; + int8_t h; } __attribute__((packed)) report_mouse_t; typedef struct { diff --git a/tmk_core/protocol/serial.h b/tmk_core/protocol/serial.h deleted file mode 100644 index 0204b84a92..0000000000 --- a/tmk_core/protocol/serial.h +++ /dev/null @@ -1,46 +0,0 @@ -/* -Copyright 2012 Jun WAKO <wakojun@gmail.com> - -This software is licensed with a Modified BSD License. -All of this is supposed to be Free Software, Open Source, DFSG-free, -GPL-compatible, and OK to use in both free and proprietary applications. -Additions and corrections to this file are welcome. - - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -* Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. -*/ - -#pragma once - -#define SERIAL_UART_DATA UDR1 - -/* host role */ -void serial_init(void); -uint8_t serial_recv(void); -int16_t serial_recv2(void); -void serial_send(uint8_t data); diff --git a/tmk_core/protocol/serial_soft.c b/tmk_core/protocol/serial_soft.c deleted file mode 100644 index 8624ef733c..0000000000 --- a/tmk_core/protocol/serial_soft.c +++ /dev/null @@ -1,234 +0,0 @@ -/* -Copyright 2012 Jun WAKO <wakojun@gmail.com> - -This software is licensed with a Modified BSD License. -All of this is supposed to be Free Software, Open Source, DFSG-free, -GPL-compatible, and OK to use in both free and proprietary applications. -Additions and corrections to this file are welcome. - - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -* Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. -*/ - -#include <stdbool.h> -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "serial.h" - -/* - * Stupid Inefficient Busy-wait Software Serial - * which is still useful for negative logic signal like Sun protocol - * if it is not supported by hardware UART. - * - * TODO: delay is not accurate enough. Instruction cycle should be counted and inline assemby is needed. - */ - -#define WAIT_US (1000000L / SERIAL_SOFT_BAUD) - -#ifdef SERIAL_SOFT_LOGIC_NEGATIVE -# define SERIAL_SOFT_RXD_IN() !(SERIAL_SOFT_RXD_READ()) -# define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_LO() -# define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_HI() -#else -# define SERIAL_SOFT_RXD_IN() !!(SERIAL_SOFT_RXD_READ()) -# define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_HI() -# define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_LO() -#endif - -#ifdef SERIAL_SOFT_PARITY_EVEN -# define SERIAL_SOFT_PARITY_VAL 0 -#elif defined(SERIAL_SOFT_PARITY_ODD) -# define SERIAL_SOFT_PARITY_VAL 1 -#endif - -/* debug for signal timing, see debug pin with oscilloscope */ -#ifdef SERIAL_SOFT_DEBUG -# define SERIAL_SOFT_DEBUG_INIT() (DDRD |= 1 << 7) -# define SERIAL_SOFT_DEBUG_TGL() (PORTD ^= 1 << 7) -#else -# define SERIAL_SOFT_DEBUG_INIT() -# define SERIAL_SOFT_DEBUG_TGL() -#endif - -void serial_init(void) { - SERIAL_SOFT_DEBUG_INIT(); - - SERIAL_SOFT_RXD_INIT(); - SERIAL_SOFT_TXD_INIT(); -} - -/* RX ring buffer */ -#define RBUF_SIZE 8 -static uint8_t rbuf[RBUF_SIZE]; -static uint8_t rbuf_head = 0; -static uint8_t rbuf_tail = 0; - -uint8_t serial_recv(void) { - uint8_t data = 0; - if (rbuf_head == rbuf_tail) { - return 0; - } - - data = rbuf[rbuf_tail]; - rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; - return data; -} - -int16_t serial_recv2(void) { - uint8_t data = 0; - if (rbuf_head == rbuf_tail) { - return -1; - } - - data = rbuf[rbuf_tail]; - rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; - return data; -} - -void serial_send(uint8_t data) { - /* signal state: IDLE: ON, START: OFF, STOP: ON, DATA0: OFF, DATA1: ON */ - -#ifdef SERIAL_SOFT_BIT_ORDER_MSB -# ifdef SERIAL_SOFT_DATA_7BIT - uint8_t mask = 0x40; -# else - uint8_t mask = 0x80; -# endif -#else - uint8_t mask = 0x01; -#endif - - uint8_t parity = 0; - - /* start bit */ - SERIAL_SOFT_TXD_OFF(); - _delay_us(WAIT_US); - -#ifdef SERIAL_SOFT_DATA_7BIT - while (mask & 0x7F) { -#else - while (mask & 0xFF) { -#endif - if (data & mask) { - SERIAL_SOFT_TXD_ON(); - parity ^= 1; - } else { - SERIAL_SOFT_TXD_OFF(); - } - _delay_us(WAIT_US); - -#ifdef SERIAL_SOFT_BIT_ORDER_MSB - mask >>= 1; -#else - mask <<= 1; -#endif - } - -#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD) - /* to center of parity bit */ - if (parity != SERIAL_SOFT_PARITY_VAL) { - SERIAL_SOFT_TXD_ON(); - } else { - SERIAL_SOFT_TXD_OFF(); - } - _delay_us(WAIT_US); -#endif - - /* stop bit */ - SERIAL_SOFT_TXD_ON(); - _delay_us(WAIT_US); -} - -/* detect edge of start bit */ -ISR(SERIAL_SOFT_RXD_VECT) { - SERIAL_SOFT_DEBUG_TGL(); - SERIAL_SOFT_RXD_INT_ENTER(); - - uint8_t data = 0; - -#ifdef SERIAL_SOFT_BIT_ORDER_MSB -# ifdef SERIAL_SOFT_DATA_7BIT - uint8_t mask = 0x40; -# else - uint8_t mask = 0x80; -# endif -#else - uint8_t mask = 0x01; -#endif - - uint8_t parity = 0; - - /* to center of start bit */ - _delay_us(WAIT_US / 2); - SERIAL_SOFT_DEBUG_TGL(); - do { - /* to center of next bit */ - _delay_us(WAIT_US); - - SERIAL_SOFT_DEBUG_TGL(); - if (SERIAL_SOFT_RXD_IN()) { - data |= mask; - parity ^= 1; - } -#ifdef SERIAL_SOFT_BIT_ORDER_MSB - mask >>= 1; -#else - mask <<= 1; -#endif -#ifdef SERIAL_SOFT_DATA_7BIT - } while (mask & 0x7F); -#else - } while (mask & 0xFF); -#endif - -#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD) - /* to center of parity bit */ - _delay_us(WAIT_US); - if (SERIAL_SOFT_RXD_IN()) { - parity ^= 1; - } - SERIAL_SOFT_DEBUG_TGL(); -#endif - - /* to center of stop bit */ - _delay_us(WAIT_US); - - uint8_t next = (rbuf_head + 1) % RBUF_SIZE; -#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD) - if ((parity == SERIAL_SOFT_PARITY_VAL) && next != rbuf_tail) { -#else - if (next != rbuf_tail) { -#endif - rbuf[rbuf_head] = data; - rbuf_head = next; - } - - SERIAL_SOFT_RXD_INT_EXIT(); - SERIAL_SOFT_DEBUG_TGL(); -} diff --git a/tmk_core/protocol/serial_uart.c b/tmk_core/protocol/serial_uart.c deleted file mode 100644 index d5b5657095..0000000000 --- a/tmk_core/protocol/serial_uart.c +++ /dev/null @@ -1,133 +0,0 @@ -/* -Copyright 2013 Jun WAKO <wakojun@gmail.com> - -This software is licensed with a Modified BSD License. -All of this is supposed to be Free Software, Open Source, DFSG-free, -GPL-compatible, and OK to use in both free and proprietary applications. -Additions and corrections to this file are welcome. - - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -* Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. -*/ - -#include <stdbool.h> -#include <avr/io.h> -#include <avr/interrupt.h> -#include "serial.h" - -#ifndef SERIAL_UART_BAUD -# define SERIAL_UART_BAUD 9600 -#endif - -#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) -#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) -#define SERIAL_UART_RXD_VECT USART1_RX_vect - -#ifndef SERIAL_UART_INIT_CUSTOM -# define SERIAL_UART_INIT_CUSTOM \ - /* enable TX */ \ - UCSR1B = _BV(TXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); -#endif - -#if defined(SERIAL_UART_RTS_LO) && defined(SERIAL_UART_RTS_HI) -// Buffer state -// Empty: RBUF_SPACE == RBUF_SIZE(head==tail) -// Last 1 space: RBUF_SPACE == 2 -// Full: RBUF_SPACE == 1(last cell of rbuf be never used.) -# define RBUF_SPACE() (rbuf_head < rbuf_tail ? (rbuf_tail - rbuf_head) : (RBUF_SIZE - rbuf_head + rbuf_tail)) -// allow to send -# define rbuf_check_rts_lo() \ - do { \ - if (RBUF_SPACE() > 2) SERIAL_UART_RTS_LO(); \ - } while (0) -// prohibit to send -# define rbuf_check_rts_hi() \ - do { \ - if (RBUF_SPACE() <= 2) SERIAL_UART_RTS_HI(); \ - } while (0) -#else -# define rbuf_check_rts_lo() -# define rbuf_check_rts_hi() -#endif - -void serial_init(void) { - do { - // Set baud rate - UBRR1L = SERIAL_UART_UBRR; - UBRR1L = SERIAL_UART_UBRR >> 8; - SERIAL_UART_INIT_CUSTOM; - } while (0); -} - -// RX ring buffer -#define RBUF_SIZE 256 -static uint8_t rbuf[RBUF_SIZE]; -static uint8_t rbuf_head = 0; -static uint8_t rbuf_tail = 0; - -uint8_t serial_recv(void) { - uint8_t data = 0; - if (rbuf_head == rbuf_tail) { - return 0; - } - - data = rbuf[rbuf_tail]; - rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; - rbuf_check_rts_lo(); - return data; -} - -int16_t serial_recv2(void) { - uint8_t data = 0; - if (rbuf_head == rbuf_tail) { - return -1; - } - - data = rbuf[rbuf_tail]; - rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; - rbuf_check_rts_lo(); - return data; -} - -void serial_send(uint8_t data) { - while (!SERIAL_UART_TXD_READY) - ; - SERIAL_UART_DATA = data; -} - -// USART RX complete interrupt -ISR(SERIAL_UART_RXD_VECT) { - uint8_t next = (rbuf_head + 1) % RBUF_SIZE; - if (next != rbuf_tail) { - rbuf[rbuf_head] = SERIAL_UART_DATA; - rbuf_head = next; - } - rbuf_check_rts_hi(); -} diff --git a/tmk_core/protocol/usb_descriptor.c b/tmk_core/protocol/usb_descriptor.c index 063bd2c3f1..52e3276d35 100644 --- a/tmk_core/protocol/usb_descriptor.c +++ b/tmk_core/protocol/usb_descriptor.c @@ -126,14 +126,27 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = { HID_RI_REPORT_SIZE(8, 0x01), HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), - // X/Y position (2 bytes) +# ifdef MOUSE_EXTENDED_REPORT + // Boot protocol XY ignored in Report protocol + HID_RI_REPORT_COUNT(8, 0x02), + HID_RI_REPORT_SIZE(8, 0x08), + HID_RI_INPUT(8, HID_IOF_CONSTANT), +# endif + // X/Y position (2 or 4 bytes) HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop HID_RI_USAGE(8, 0x30), // X HID_RI_USAGE(8, 0x31), // Y +# ifndef MOUSE_EXTENDED_REPORT HID_RI_LOGICAL_MINIMUM(8, -127), HID_RI_LOGICAL_MAXIMUM(8, 127), HID_RI_REPORT_COUNT(8, 0x02), HID_RI_REPORT_SIZE(8, 0x08), +# else + HID_RI_LOGICAL_MINIMUM(16, -32767), + HID_RI_LOGICAL_MAXIMUM(16, 32767), + HID_RI_REPORT_COUNT(8, 0x02), + HID_RI_REPORT_SIZE(8, 0x10), +# endif HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE), // Vertical wheel (1 byte) diff --git a/tmk_core/protocol/usb_descriptor.h b/tmk_core/protocol/usb_descriptor.h index 6c3424145c..f8b7a863aa 100644 --- a/tmk_core/protocol/usb_descriptor.h +++ b/tmk_core/protocol/usb_descriptor.h @@ -47,6 +47,9 @@ #ifdef PROTOCOL_CHIBIOS # include <hal.h> +# if STM32_USB_USE_OTG1 == TRUE +# define USB_ENDPOINTS_ARE_REORDERABLE +# endif #endif /* @@ -216,7 +219,7 @@ enum usb_endpoints { #ifdef RAW_ENABLE RAW_IN_EPNUM = NEXT_EPNUM, -# if STM32_USB_USE_OTG1 +# ifdef USB_ENDPOINTS_ARE_REORDERABLE # define RAW_OUT_EPNUM RAW_IN_EPNUM # else RAW_OUT_EPNUM = NEXT_EPNUM, @@ -234,7 +237,7 @@ enum usb_endpoints { // ChibiOS has enough memory and descriptor to actually enable the endpoint // It could use the same endpoint numbers, as that's supported by ChibiOS // But the QMK code currently assumes that the endpoint numbers are different -# if STM32_USB_USE_OTG1 +# ifdef USB_ENDPOINTS_ARE_REORDERABLE # define CONSOLE_OUT_EPNUM CONSOLE_IN_EPNUM # else CONSOLE_OUT_EPNUM = NEXT_EPNUM, @@ -246,7 +249,7 @@ enum usb_endpoints { #ifdef MIDI_ENABLE MIDI_STREAM_IN_EPNUM = NEXT_EPNUM, -# if STM32_USB_USE_OTG1 +# ifdef USB_ENDPOINTS_ARE_REORDERABLE # define MIDI_STREAM_OUT_EPNUM MIDI_STREAM_IN_EPNUM # else |