summaryrefslogtreecommitdiffstats
path: root/tmk_core/protocol/adb.c
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/protocol/adb.c')
-rw-r--r--tmk_core/protocol/adb.c535
1 files changed, 0 insertions, 535 deletions
diff --git a/tmk_core/protocol/adb.c b/tmk_core/protocol/adb.c
deleted file mode 100644
index 367f1b09fa..0000000000
--- a/tmk_core/protocol/adb.c
+++ /dev/null
@@ -1,535 +0,0 @@
-/*
-Copyright 2011-19 Jun WAKO <wakojun@gmail.com>
-Copyright 2013 Shay Green <gblargg@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
-* Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include <stdbool.h>
-#include <util/delay.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include "adb.h"
-#include "print.h"
-
-// GCC doesn't inline functions normally
-#define data_lo() (ADB_DDR |= (1 << ADB_DATA_BIT))
-#define data_hi() (ADB_DDR &= ~(1 << ADB_DATA_BIT))
-#define data_in() (ADB_PIN & (1 << ADB_DATA_BIT))
-
-#ifdef ADB_PSW_BIT
-static inline void psw_lo(void);
-static inline void psw_hi(void);
-static inline bool psw_in(void);
-#endif
-
-static inline void attention(void);
-static inline void place_bit0(void);
-static inline void place_bit1(void);
-static inline void send_byte(uint8_t data);
-static inline uint16_t wait_data_lo(uint16_t us);
-static inline uint16_t wait_data_hi(uint16_t us);
-
-void adb_host_init(void) {
- ADB_PORT &= ~(1 << ADB_DATA_BIT);
- data_hi();
-#ifdef ADB_PSW_BIT
- psw_hi();
-#endif
-}
-
-#ifdef ADB_PSW_BIT
-bool adb_host_psw(void) { return psw_in(); }
-#endif
-
-/*
- * Don't call this in a row without the delay, otherwise it makes some of poor controllers
- * overloaded and misses strokes. Recommended interval is 12ms.
- *
- * Thanks a lot, blargg!
- * <http://geekhack.org/index.php?topic=14290.msg1068919#msg1068919>
- * <http://geekhack.org/index.php?topic=14290.msg1070139#msg1070139>
- */
-uint16_t adb_host_kbd_recv(void) { return adb_host_talk(ADB_ADDR_KEYBOARD, ADB_REG_0); }
-
-#ifdef ADB_MOUSE_ENABLE
-__attribute__((weak)) void adb_mouse_init(void) { return; }
-
-__attribute__((weak)) void adb_mouse_task(void) { return; }
-
-uint16_t adb_host_mouse_recv(void) { return adb_host_talk(ADB_ADDR_MOUSE, ADB_REG_0); }
-#endif
-
-// This sends Talk command to read data from register and returns length of the data.
-uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
- for (int8_t i = 0; i < len; i++) buf[i] = 0;
-
- cli();
- attention();
- send_byte((addr << 4) | ADB_CMD_TALK | reg);
- place_bit0(); // Stopbit(0)
- // TODO: Service Request(Srq):
- // Device holds low part of comannd stopbit for 140-260us
- //
- // Command:
- // ......._ ______________________ ___ ............_ -------
- // | | | | | | |
- // Command | | | | | Data bytes | |
- // ........|___| | 140-260 |__| |_............|___|
- // |stop0 | Tlt Stop-to-Start |start1| |stop0 |
- //
- // Command without data:
- // ......._ __________________________
- // | |
- // Command | |
- // ........|___| | 140-260 |
- // |stop0 | Tlt Stop-to-Start |
- //
- // Service Request:
- // ......._ ______ ___ ............_ -------
- // | 140-260 | | | | | |
- // Command | Service Request | | | | Data bytes | |
- // ........|___________________| |__| |_............|___|
- // |stop0 | |start1| |stop0 |
- // ......._ __________
- // | 140-260 |
- // Command | Service Request |
- // ........|___________________|
- // |stop0 |
- // This can be happened?
- // ......._ ______________________ ___ ............_ -----
- // | | | | | | 140-260 |
- // Command | | | | | Data bytes | Service Request |
- // ........|___| | 140-260 |__| |_............|_________________|
- // |stop0 | Tlt Stop-to-Start |start1| |stop0 |
- //
- // "Service requests are issued by the devices during a very specific time at the
- // end of the reception of the command packet.
- // If a device in need of service issues a service request, it must do so within
- // the 65 µs of the Stop Bit’s low time and maintain the line low for a total of 300 µs."
- //
- // "A device sends a Service Request signal by holding the bus low during the low
- // portion of the stop bit of any command or data transaction. The device must lengthen
- // the stop by a minimum of 140 J.lS beyond its normal duration, as shown in Figure 8-15."
- // http://ww1.microchip.com/downloads/en/AppNotes/00591b.pdf
- if (!wait_data_hi(500)) { // Service Request(310us Adjustable Keyboard): just ignored
- xprintf("R");
- sei();
- return 0;
- }
- if (!wait_data_lo(500)) { // Tlt/Stop to Start(140-260us)
- sei();
- return 0; // No data from device(not error);
- }
-
- // start bit(1)
- if (!wait_data_hi(40)) {
- xprintf("S");
- sei();
- return 0;
- }
- if (!wait_data_lo(100)) {
- xprintf("s");
- sei();
- return 0;
- }
-
- uint8_t n = 0; // bit count
- do {
- //
- // |<- bit_cell_max(130) ->|
- // | |<- lo ->|
- // | | |<-hi->|
- // _______
- // | | |
- // | 130-lo | lo-hi |
- // |________| |
- //
- uint8_t lo = (uint8_t)wait_data_hi(130);
- if (!lo) goto error; // no more bit or after stop bit
-
- uint8_t hi = (uint8_t)wait_data_lo(lo);
- if (!hi) goto error; // stop bit extedned by Srq?
-
- if (n / 8 >= len) continue; // can't store in buf
-
- buf[n / 8] <<= 1;
- if ((130 - lo) < (lo - hi)) {
- buf[n / 8] |= 1;
- }
- } while (++n);
-
-error:
- sei();
- return n / 8;
-}
-
-uint16_t adb_host_talk(uint8_t addr, uint8_t reg) {
- uint8_t len;
- uint8_t buf[8];
- len = adb_host_talk_buf(addr, reg, buf, 8);
- if (len != 2) return 0;
- return (buf[0] << 8 | buf[1]);
-}
-
-void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
- cli();
- attention();
- send_byte((addr << 4) | ADB_CMD_LISTEN | reg);
- place_bit0(); // Stopbit(0)
- // TODO: Service Request
- _delay_us(200); // Tlt/Stop to Start
- place_bit1(); // Startbit(1)
- for (int8_t i = 0; i < len; i++) {
- send_byte(buf[i]);
- // xprintf("%02X ", buf[i]);
- }
- place_bit0(); // Stopbit(0);
- sei();
-}
-
-void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l) {
- uint8_t buf[2] = {data_h, data_l};
- adb_host_listen_buf(addr, reg, buf, 2);
-}
-
-void adb_host_flush(uint8_t addr) {
- cli();
- attention();
- send_byte((addr << 4) | ADB_CMD_FLUSH);
- place_bit0(); // Stopbit(0)
- _delay_us(200); // Tlt/Stop to Start
- sei();
-}
-
-// send state of LEDs
-void adb_host_kbd_led(uint8_t led) {
- // Listen Register2
- // upper byte: not used
- // lower byte: bit2=ScrollLock, bit1=CapsLock, bit0=NumLock
- adb_host_listen(ADB_ADDR_KEYBOARD, ADB_REG_2, 0, led & 0x07);
-}
-
-#ifdef ADB_PSW_BIT
-static inline void psw_lo() {
- ADB_DDR |= (1 << ADB_PSW_BIT);
- ADB_PORT &= ~(1 << ADB_PSW_BIT);
-}
-static inline void psw_hi() {
- ADB_PORT |= (1 << ADB_PSW_BIT);
- ADB_DDR &= ~(1 << ADB_PSW_BIT);
-}
-static inline bool psw_in() {
- ADB_PORT |= (1 << ADB_PSW_BIT);
- ADB_DDR &= ~(1 << ADB_PSW_BIT);
- return ADB_PIN & (1 << ADB_PSW_BIT);
-}
-#endif
-
-static inline void attention(void) {
- data_lo();
- _delay_us(800 - 35); // bit1 holds lo for 35 more
- place_bit1();
-}
-
-static inline void place_bit0(void) {
- data_lo();
- _delay_us(65);
- data_hi();
- _delay_us(35);
-}
-
-static inline void place_bit1(void) {
- data_lo();
- _delay_us(35);
- data_hi();
- _delay_us(65);
-}
-
-static inline void send_byte(uint8_t data) {
- for (int i = 0; i < 8; i++) {
- if (data & (0x80 >> i))
- place_bit1();
- else
- place_bit0();
- }
-}
-
-// These are carefully coded to take 6 cycles of overhead.
-// inline asm approach became too convoluted
-static inline uint16_t wait_data_lo(uint16_t us) {
- do {
- if (!data_in()) break;
- _delay_us(1 - (6 * 1000000.0 / F_CPU));
- } while (--us);
- return us;
-}
-
-static inline uint16_t wait_data_hi(uint16_t us) {
- do {
- if (data_in()) break;
- _delay_us(1 - (6 * 1000000.0 / F_CPU));
- } while (--us);
- return us;
-}
-
-/*
-ADB Protocol
-============
-
-Resources
----------
-ADB - The Untold Story: Space Aliens Ate My Mouse
- http://developer.apple.com/legacy/mac/library/#technotes/hw/hw_01.html
-ADB Manager
- http://developer.apple.com/legacy/mac/library/documentation/mac/pdf/Devices/ADB_Manager.pdf
- Service request(5-17)
-Apple IIgs Hardware Reference Second Edition [Chapter6 p121]
- ftp://ftp.apple.asimov.net/pub/apple_II/documentation/Apple%20IIgs%20Hardware%20Reference.pdf
-ADB Keycode
- http://72.0.193.250/Documentation/macppc/adbkeycodes/
- http://m0115.web.fc2.com/m0115.jpg
- [Inside Macintosh volume V, pages 191-192]
- http://www.opensource.apple.com/source/IOHIDFamily/IOHIDFamily-421.18.3/IOHIDFamily/Cosmo_USB2ADB.c
-ADB Signaling
- http://kbdbabel.sourceforge.net/doc/kbd_signaling_pcxt_ps2_adb.pdf
-ADB Overview & History
- http://en.wikipedia.org/wiki/Apple_Desktop_Bus
-Microchip Application Note: ADB device(with code for PIC16C)
- http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1824&appnote=en011062
-AVR ATtiny2131 ADB to PS/2 converter(Japanese)
- http://hp.vector.co.jp/authors/VA000177/html/KeyBoardA5DEA5CBA5A2II.html
-
-
-Pinouts
--------
- ADB female socket from the front:
- __________
- | | <--- top
- | 4o o3 |
- |2o o1|
- | == |
- |________| <--- bottom
- | | <--- 4pins
-
-
- ADB female socket from bottom:
-
- ========== <--- front
- | |
- | |
- |2o o1|
- |4o o3|
- ---------- <--- back
-
- 1: Data
- 2: Power SW(low when press Power key)
- 3: Vcc(5V)
- 4: GND
-
-
-Commands
---------
- ADB command is 1byte and consists of 4bit-address, 2bit-command
- type and 2bit-register. The commands are always sent by Host.
-
- Command format:
- 7 6 5 4 3 2 1 0
- | | | |------------ address
- | |-------- command type
- | |---- register
-
- bits commands
- ------------------------------------------------------
- - - - - 0 0 0 0 Send Reset(reset all devices)
- A A A A 0 0 0 1 Flush(reset a device)
- - - - - 0 0 1 0 Reserved
- - - - - 0 0 1 1 Reserved
- - - - - 0 1 - - Reserved
- A A A A 1 0 R R Listen(write to a device)
- A A A A 1 1 R R Talk(read from a device)
-
- The command to read keycodes from keyboard is 0x2C which
- consist of keyboard address 2 and Talk against register 0.
-
- Address:
- 2: keyboard
- 3: mice
-
- Registers:
- 0: application(keyboard uses this to store its data.)
- 1: application
- 2: application(keyboard uses this for LEDs and state of modifiers)
- 3: status and command
-
-
-Communication
--------------
- This is a minimum information for keyboard communication.
- See "Resources" for detail.
-
- Signaling:
-
- ~~~~____________~~||||||||||||__~~~~~_~~|||||||||||||||__~~~~
-
- |800us | |7 Command 0| | | |15-64 Data 0|Stopbit(0)
- +Attention | | | +Startbit(1)
- +Startbit(1) | +Tlt(140-260us)
- +stopbit(0)
-
- Bit cells:
-
- bit0: ______~~~
- 65 :35us
-
- bit1: ___~~~~~~
- 35 :65us
-
- bit0 low time: 60-70% of bit cell(42-91us)
- bit1 low time: 30-40% of bit cell(21-52us)
- bit cell time: 70-130us
- [from Apple IIgs Hardware Reference Second Edition]
-
- Criterion for bit0/1:
- After 55us if line is low/high then bit is 0/1.
-
- Attention & start bit:
- Host asserts low in 560-1040us then places start bit(1).
-
- Tlt(Stop to Start):
- Bus stays high in 140-260us then device places start bit(1).
-
- Global reset:
- Host asserts low in 2.8-5.2ms. All devices are forced to reset.
-
- Service request from device(Srq):
- Device can request to send at commad(Global only?) stop bit.
- Requesting device keeps low for 140-260us at stop bit of command.
-
-
-Keyboard Data(Register0)
- This 16bit data can contains two keycodes and two released flags.
- First keycode is palced in upper byte. When one keyocode is sent,
- lower byte is 0xFF.
- Release flag is 1 when key is released.
-
- 1514 . . . . . 8 7 6 . . . . . 0
- | | | | | | | | | +-+-+-+-+-+-+- Keycode2
- | | | | | | | | +--------------- Released2(1 when the key is released)
- | +-+-+-+-+-+-+----------------- Keycode1
- +------------------------------- Released1(1 when the key is released)
-
- Keycodes:
- Scancode consists of 7bit keycode and 1bit release flag.
- Device can send two keycodes at once. If just one keycode is sent
- keycode1 contains it and keyocode2 is 0xFF.
-
- Power switch:
- You can read the state from PSW line(active low) however
- the switch has a special scancode 0x7F7F, so you can
- also read from Data line. It uses 0xFFFF for release scancode.
-
-Keyboard LEDs & state of keys(Register2)
- This register hold current state of three LEDs and nine keys.
- The state of LEDs can be changed by sending Listen command.
-
- 1514 . . . . . . 7 6 5 . 3 2 1 0
- | | | | | | | | | | | | | | | +- LED1(NumLock)
- | | | | | | | | | | | | | | +--- LED2(CapsLock)
- | | | | | | | | | | | | | +----- LED3(ScrollLock)
- | | | | | | | | | | +-+-+------- Reserved
- | | | | | | | | | +------------- ScrollLock
- | | | | | | | | +--------------- NumLock
- | | | | | | | +----------------- Apple/Command
- | | | | | | +------------------- Option
- | | | | | +--------------------- Shift
- | | | | +----------------------- Control
- | | | +------------------------- Reset/Power
- | | +--------------------------- CapsLock
- | +----------------------------- Delete
- +------------------------------- Reserved
-
-Address, Handler ID and bits(Register3)
- 1514131211 . . 8 7 . . . . . . 0
- | | | | | | | | | | | | | | | |
- | | | | | | | | +-+-+-+-+-+-+-+- Handler ID
- | | | | +-+-+-+----------------- Address
- | | | +------------------------- 0
- | | +--------------------------- Service request enable(1 = enabled)
- | +----------------------------- Exceptional event(alwyas 1 if not used)
- +------------------------------- 0
-
-ADB Bit Cells
- bit cell time: 70-130us
- low part of bit0: 60-70% of bit cell
- low part of bit1: 30-40% of bit cell
-
- bit cell time 70us 130us
- --------------------------------------------
- low part of bit0 42-49 78-91
- high part of bit0 21-28 39-52
- low part of bit1 21-28 39-52
- high part of bit1 42-49 78-91
-
-
- bit0:
- 70us bit cell:
- ____________~~~~~~
- 42-49 21-28
-
- 130us bit cell:
- ____________~~~~~~
- 78-91 39-52
-
- bit1:
- 70us bit cell:
- ______~~~~~~~~~~~~
- 21-28 42-49
-
- 130us bit cell:
- ______~~~~~~~~~~~~
- 39-52 78-91
-
- [from Apple IIgs Hardware Reference Second Edition]
-
-Keyboard Handle ID
- Apple Standard Keyboard M0116: 0x01
- Apple Extended Keyboard M0115: 0x02
- Apple Extended Keyboard II M3501: 0x02
- Apple Adjustable Keybaord: 0x10
-
- http://lxr.free-electrons.com/source/drivers/macintosh/adbhid.c?v=4.4#L802
-
-END_OF_ADB
-*/