diff options
Diffstat (limited to 'tmk_core/common')
-rw-r--r-- | tmk_core/common/avr/bootloader.c | 10 | ||||
-rw-r--r-- | tmk_core/common/avr/suspend.c | 2 | ||||
-rw-r--r-- | tmk_core/common/avr/timer.c | 33 | ||||
-rw-r--r-- | tmk_core/common/command.c | 2 |
4 files changed, 38 insertions, 9 deletions
diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c index ad547b9853..98a24d1782 100644 --- a/tmk_core/common/avr/bootloader.c +++ b/tmk_core/common/avr/bootloader.c @@ -1,6 +1,7 @@ #include <stdint.h> #include <stdbool.h> #include <avr/io.h> +#include <avr/eeprom.h> #include <avr/interrupt.h> #include <avr/wdt.h> #include <util/delay.h> @@ -89,6 +90,10 @@ void bootloader_jump(void) { _delay_ms(5); #endif + #ifdef EEPROM_BOOTLOADER_START + eeprom_write_byte((uint8_t *)EEPROM_BOOTLOADER_START, 0x00); + #endif + // watchdog reset reset_key = BOOTLOADER_RESET_KEY; wdt_enable(WDTO_250MS); @@ -114,6 +119,11 @@ void bootloader_jump(void) { #endif } +#ifdef __AVR_ATmega32A__ +// MCUSR is actually called MCUCSR in ATmega32A +#define MCUSR MCUCSR +#endif + /* this runs before main() */ void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3"))); void bootloader_jump_after_watchdog_reset(void) diff --git a/tmk_core/common/avr/suspend.c b/tmk_core/common/avr/suspend.c index 0c81e83612..0e97892d9d 100644 --- a/tmk_core/common/avr/suspend.c +++ b/tmk_core/common/avr/suspend.c @@ -65,6 +65,7 @@ static uint8_t wdt_timeout = 0; static void power_down(uint8_t wdto) { +#ifndef __AVR_ATmega32A__ #ifdef PROTOCOL_LUFA if (USB_DeviceState == DEVICE_STATE_Configured) return; #endif @@ -99,6 +100,7 @@ static void power_down(uint8_t wdto) // Disable watchdog after sleep wdt_disable(); +#endif } #endif diff --git a/tmk_core/common/avr/timer.c b/tmk_core/common/avr/timer.c index 84af444885..369015200d 100644 --- a/tmk_core/common/avr/timer.c +++ b/tmk_core/common/avr/timer.c @@ -29,25 +29,35 @@ volatile uint32_t timer_count; void timer_init(void) { - // Timer0 CTC mode - TCCR0A = 0x02; - #if TIMER_PRESCALER == 1 - TCCR0B = 0x01; + uint8_t prescaler = 0x01; #elif TIMER_PRESCALER == 8 - TCCR0B = 0x02; + uint8_t prescaler = 0x02; #elif TIMER_PRESCALER == 64 - TCCR0B = 0x03; + uint8_t prescaler = 0x03; #elif TIMER_PRESCALER == 256 - TCCR0B = 0x04; + uint8_t prescaler = 0x04; #elif TIMER_PRESCALER == 1024 - TCCR0B = 0x05; + uint8_t prescaler = 0x05; #else # error "Timer prescaler value is NOT vaild." #endif +#ifndef __AVR_ATmega32A__ + // Timer0 CTC mode + TCCR0A = 0x02; + + TCCR0B = prescaler; + OCR0A = TIMER_RAW_TOP; TIMSK0 = (1<<OCIE0A); +#else + // Timer0 CTC mode + TCCR0 = (1 << WGM01) | prescaler; + + OCR0 = TIMER_RAW_TOP; + TIMSK = (1 << OCIE0); +#endif } inline @@ -107,7 +117,12 @@ uint32_t timer_elapsed32(uint32_t last) } // excecuted once per 1ms.(excess for just timer count?) -ISR(TIMER0_COMPA_vect) +#ifndef __AVR_ATmega32A__ +#define TIMER_INTERRUPT_VECTOR TIMER0_COMPA_vect +#else +#define TIMER_INTERRUPT_VECTOR TIMER0_COMP_vect +#endif +ISR(TIMER_INTERRUPT_VECTOR, ISR_NOBLOCK) { timer_count++; } diff --git a/tmk_core/common/command.c b/tmk_core/common/command.c index 5f29bc0b4e..beba768eca 100644 --- a/tmk_core/common/command.c +++ b/tmk_core/common/command.c @@ -235,8 +235,10 @@ static void print_status(void) print("\n\t- Status -\n"); print_val_hex8(host_keyboard_leds()); +#ifndef PROTOCOL_VUSB print_val_hex8(keyboard_protocol); print_val_hex8(keyboard_idle); +#endif #ifdef NKRO_ENABLE print_val_hex8(keymap_config.nkro); #endif |