diff options
Diffstat (limited to 'tmk_core/common')
-rwxr-xr-x | tmk_core/common/chibios/eeprom_stm32.c | 673 | ||||
-rwxr-xr-x | tmk_core/common/chibios/eeprom_stm32.h | 89 | ||||
-rw-r--r-- | tmk_core/common/chibios/eeprom_teensy.c (renamed from tmk_core/common/chibios/eeprom.c) | 0 | ||||
-rwxr-xr-x | tmk_core/common/chibios/flash_stm32.c | 180 | ||||
-rwxr-xr-x | tmk_core/common/chibios/flash_stm32.h | 53 | ||||
-rw-r--r-- | tmk_core/common/eeconfig.c | 11 | ||||
-rw-r--r-- | tmk_core/common/eeconfig.h | 16 |
7 files changed, 1022 insertions, 0 deletions
diff --git a/tmk_core/common/chibios/eeprom_stm32.c b/tmk_core/common/chibios/eeprom_stm32.c new file mode 100755 index 0000000000..3c19451223 --- /dev/null +++ b/tmk_core/common/chibios/eeprom_stm32.c @@ -0,0 +1,673 @@ +/* + * This software is experimental and a work in progress. + * Under no circumstances should these files be used in relation to any critical system(s). + * Use of these files is at your own risk. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR + * PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and + * https://github.com/leaflabs/libmaple + * + * Modifications for QMK and STM32F303 by Yiancar + */ + +#include "eeprom_stm32.h" + + FLASH_Status EE_ErasePage(uint32_t); + + uint16_t EE_CheckPage(uint32_t, uint16_t); + uint16_t EE_CheckErasePage(uint32_t, uint16_t); + uint16_t EE_Format(void); + uint32_t EE_FindValidPage(void); + uint16_t EE_GetVariablesCount(uint32_t, uint16_t); + uint16_t EE_PageTransfer(uint32_t, uint32_t, uint16_t); + uint16_t EE_VerifyPageFullWriteVariable(uint16_t, uint16_t); + + uint32_t PageBase0 = EEPROM_PAGE0_BASE; + uint32_t PageBase1 = EEPROM_PAGE1_BASE; + uint32_t PageSize = EEPROM_PAGE_SIZE; + uint16_t Status = EEPROM_NOT_INIT; + +// See http://www.st.com/web/en/resource/technical/document/application_note/CD00165693.pdf + +/** + * @brief Check page for blank + * @param page base address + * @retval Success or error + * EEPROM_BAD_FLASH: page not empty after erase + * EEPROM_OK: page blank + */ +uint16_t EE_CheckPage(uint32_t pageBase, uint16_t status) +{ + uint32_t pageEnd = pageBase + (uint32_t)PageSize; + + // Page Status not EEPROM_ERASED and not a "state" + if ((*(__IO uint16_t*)pageBase) != EEPROM_ERASED && (*(__IO uint16_t*)pageBase) != status) + return EEPROM_BAD_FLASH; + for(pageBase += 4; pageBase < pageEnd; pageBase += 4) + if ((*(__IO uint32_t*)pageBase) != 0xFFFFFFFF) // Verify if slot is empty + return EEPROM_BAD_FLASH; + return EEPROM_OK; +} + +/** + * @brief Erase page with increment erase counter (page + 2) + * @param page base address + * @retval Success or error + * FLASH_COMPLETE: success erase + * - Flash error code: on write Flash error + */ +FLASH_Status EE_ErasePage(uint32_t pageBase) +{ + FLASH_Status FlashStatus; + uint16_t data = (*(__IO uint16_t*)(pageBase)); + if ((data == EEPROM_ERASED) || (data == EEPROM_VALID_PAGE) || (data == EEPROM_RECEIVE_DATA)) + data = (*(__IO uint16_t*)(pageBase + 2)) + 1; + else + data = 0; + + FlashStatus = FLASH_ErasePage(pageBase); + if (FlashStatus == FLASH_COMPLETE) + FlashStatus = FLASH_ProgramHalfWord(pageBase + 2, data); + + return FlashStatus; +} + +/** + * @brief Check page for blank and erase it + * @param page base address + * @retval Success or error + * - Flash error code: on write Flash error + * - EEPROM_BAD_FLASH: page not empty after erase + * - EEPROM_OK: page blank + */ +uint16_t EE_CheckErasePage(uint32_t pageBase, uint16_t status) +{ + uint16_t FlashStatus; + if (EE_CheckPage(pageBase, status) != EEPROM_OK) + { + FlashStatus = EE_ErasePage(pageBase); + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + return EE_CheckPage(pageBase, status); + } + return EEPROM_OK; +} + +/** + * @brief Find valid Page for write or read operation + * @param Page0: Page0 base address + * Page1: Page1 base address + * @retval Valid page address (PAGE0 or PAGE1) or NULL in case of no valid page was found + */ +uint32_t EE_FindValidPage(void) +{ + uint16_t status0 = (*(__IO uint16_t*)PageBase0); // Get Page0 actual status + uint16_t status1 = (*(__IO uint16_t*)PageBase1); // Get Page1 actual status + + if (status0 == EEPROM_VALID_PAGE && status1 == EEPROM_ERASED) + return PageBase0; + if (status1 == EEPROM_VALID_PAGE && status0 == EEPROM_ERASED) + return PageBase1; + + return 0; +} + +/** + * @brief Calculate unique variables in EEPROM + * @param start: address of first slot to check (page + 4) + * @param end: page end address + * @param address: 16 bit virtual address of the variable to excluse (or 0XFFFF) + * @retval count of variables + */ +uint16_t EE_GetVariablesCount(uint32_t pageBase, uint16_t skipAddress) +{ + uint16_t varAddress, nextAddress; + uint32_t idx; + uint32_t pageEnd = pageBase + (uint32_t)PageSize; + uint16_t count = 0; + + for (pageBase += 6; pageBase < pageEnd; pageBase += 4) + { + varAddress = (*(__IO uint16_t*)pageBase); + if (varAddress == 0xFFFF || varAddress == skipAddress) + continue; + + count++; + for(idx = pageBase + 4; idx < pageEnd; idx += 4) + { + nextAddress = (*(__IO uint16_t*)idx); + if (nextAddress == varAddress) + { + count--; + break; + } + } + } + return count; +} + +/** + * @brief Transfers last updated variables data from the full Page to an empty one. + * @param newPage: new page base address + * @param oldPage: old page base address + * @param SkipAddress: 16 bit virtual address of the variable (or 0xFFFF) + * @retval Success or error status: + * - FLASH_COMPLETE: on success + * - EEPROM_OUT_SIZE: if valid new page is full + * - Flash error code: on write Flash error + */ +uint16_t EE_PageTransfer(uint32_t newPage, uint32_t oldPage, uint16_t SkipAddress) +{ + uint32_t oldEnd, newEnd; + uint32_t oldIdx, newIdx, idx; + uint16_t address, data, found; + FLASH_Status FlashStatus; + + // Transfer process: transfer variables from old to the new active page + newEnd = newPage + ((uint32_t)PageSize); + + // Find first free element in new page + for (newIdx = newPage + 4; newIdx < newEnd; newIdx += 4) + if ((*(__IO uint32_t*)newIdx) == 0xFFFFFFFF) // Verify if element + break; // contents are 0xFFFFFFFF + if (newIdx >= newEnd) + return EEPROM_OUT_SIZE; + + oldEnd = oldPage + 4; + oldIdx = oldPage + (uint32_t)(PageSize - 2); + + for (; oldIdx > oldEnd; oldIdx -= 4) + { + address = *(__IO uint16_t*)oldIdx; + if (address == 0xFFFF || address == SkipAddress) + continue; // it's means that power off after write data + + found = 0; + for (idx = newPage + 6; idx < newIdx; idx += 4) + if ((*(__IO uint16_t*)(idx)) == address) + { + found = 1; + break; + } + + if (found) + continue; + + if (newIdx < newEnd) + { + data = (*(__IO uint16_t*)(oldIdx - 2)); + + FlashStatus = FLASH_ProgramHalfWord(newIdx, data); + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + + FlashStatus = FLASH_ProgramHalfWord(newIdx + 2, address); + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + + newIdx += 4; + } + else + return EEPROM_OUT_SIZE; + } + + // Erase the old Page: Set old Page status to EEPROM_EEPROM_ERASED status + data = EE_CheckErasePage(oldPage, EEPROM_ERASED); + if (data != EEPROM_OK) + return data; + + // Set new Page status + FlashStatus = FLASH_ProgramHalfWord(newPage, EEPROM_VALID_PAGE); + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + + return EEPROM_OK; +} + +/** + * @brief Verify if active page is full and Writes variable in EEPROM. + * @param Address: 16 bit virtual address of the variable + * @param Data: 16 bit data to be written as variable value + * @retval Success or error status: + * - FLASH_COMPLETE: on success + * - EEPROM_PAGE_FULL: if valid page is full (need page transfer) + * - EEPROM_NO_VALID_PAGE: if no valid page was found + * - EEPROM_OUT_SIZE: if EEPROM size exceeded + * - Flash error code: on write Flash error + */ +uint16_t EE_VerifyPageFullWriteVariable(uint16_t Address, uint16_t Data) +{ + FLASH_Status FlashStatus; + uint32_t idx, pageBase, pageEnd, newPage; + uint16_t count; + + // Get valid Page for write operation + pageBase = EE_FindValidPage(); + if (pageBase == 0) + return EEPROM_NO_VALID_PAGE; + + // Get the valid Page end Address + pageEnd = pageBase + PageSize; // Set end of page + + for (idx = pageEnd - 2; idx > pageBase; idx -= 4) + { + if ((*(__IO uint16_t*)idx) == Address) // Find last value for address + { + count = (*(__IO uint16_t*)(idx - 2)); // Read last data + if (count == Data) + return EEPROM_OK; + if (count == 0xFFFF) + { + FlashStatus = FLASH_ProgramHalfWord(idx - 2, Data); // Set variable data + if (FlashStatus == FLASH_COMPLETE) + return EEPROM_OK; + } + break; + } + } + + // Check each active page address starting from begining + for (idx = pageBase + 4; idx < pageEnd; idx += 4) + if ((*(__IO uint32_t*)idx) == 0xFFFFFFFF) // Verify if element + { // contents are 0xFFFFFFFF + FlashStatus = FLASH_ProgramHalfWord(idx, Data); // Set variable data + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + FlashStatus = FLASH_ProgramHalfWord(idx + 2, Address); // Set variable virtual address + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + return EEPROM_OK; + } + + // Empty slot not found, need page transfer + // Calculate unique variables in page + count = EE_GetVariablesCount(pageBase, Address) + 1; + if (count >= (PageSize / 4 - 1)) + return EEPROM_OUT_SIZE; + + if (pageBase == PageBase1) + newPage = PageBase0; // New page address where variable will be moved to + else + newPage = PageBase1; + + // Set the new Page status to RECEIVE_DATA status + FlashStatus = FLASH_ProgramHalfWord(newPage, EEPROM_RECEIVE_DATA); + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + + // Write the variable passed as parameter in the new active page + FlashStatus = FLASH_ProgramHalfWord(newPage + 4, Data); + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + + FlashStatus = FLASH_ProgramHalfWord(newPage + 6, Address); + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + + return EE_PageTransfer(newPage, pageBase, Address); +} + +/*EEPROMClass::EEPROMClass(void) +{ + PageBase0 = EEPROM_PAGE0_BASE; + PageBase1 = EEPROM_PAGE1_BASE; + PageSize = EEPROM_PAGE_SIZE; + Status = EEPROM_NOT_INIT; +}*/ +/* +uint16_t EEPROM_init(uint32_t pageBase0, uint32_t pageBase1, uint32_t pageSize) +{ + PageBase0 = pageBase0; + PageBase1 = pageBase1; + PageSize = pageSize; + return EEPROM_init(); +}*/ + +uint16_t EEPROM_init(void) +{ + uint16_t status0 = 6, status1 = 6; + FLASH_Status FlashStatus; + + FLASH_Unlock(); + Status = EEPROM_NO_VALID_PAGE; + + status0 = (*(__IO uint16_t *)PageBase0); + status1 = (*(__IO uint16_t *)PageBase1); + + switch (status0) + { +/* + Page0 Page1 + ----- ----- + EEPROM_ERASED EEPROM_VALID_PAGE Page1 valid, Page0 erased + EEPROM_RECEIVE_DATA Page1 need set to valid, Page0 erased + EEPROM_ERASED make EE_Format + any Error: EEPROM_NO_VALID_PAGE +*/ + case EEPROM_ERASED: + if (status1 == EEPROM_VALID_PAGE) // Page0 erased, Page1 valid + Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED); + else if (status1 == EEPROM_RECEIVE_DATA) // Page0 erased, Page1 receive + { + FlashStatus = FLASH_ProgramHalfWord(PageBase1, EEPROM_VALID_PAGE); + if (FlashStatus != FLASH_COMPLETE) + Status = FlashStatus; + else + Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED); + } + else if (status1 == EEPROM_ERASED) // Both in erased state so format EEPROM + Status = EEPROM_format(); + break; +/* + Page0 Page1 + ----- ----- + EEPROM_RECEIVE_DATA EEPROM_VALID_PAGE Transfer Page1 to Page0 + EEPROM_ERASED Page0 need set to valid, Page1 erased + any EEPROM_NO_VALID_PAGE +*/ + case EEPROM_RECEIVE_DATA: + if (status1 == EEPROM_VALID_PAGE) // Page0 receive, Page1 valid + Status = EE_PageTransfer(PageBase0, PageBase1, 0xFFFF); + else if (status1 == EEPROM_ERASED) // Page0 receive, Page1 erased + { + Status = EE_CheckErasePage(PageBase1, EEPROM_ERASED); + if (Status == EEPROM_OK) + { + FlashStatus = FLASH_ProgramHalfWord(PageBase0, EEPROM_VALID_PAGE); + if (FlashStatus != FLASH_COMPLETE) + Status = FlashStatus; + else + Status = EEPROM_OK; + } + } + break; +/* + Page0 Page1 + ----- ----- + EEPROM_VALID_PAGE EEPROM_VALID_PAGE Error: EEPROM_NO_VALID_PAGE + EEPROM_RECEIVE_DATA Transfer Page0 to Page1 + any Page0 valid, Page1 erased +*/ + case EEPROM_VALID_PAGE: + if (status1 == EEPROM_VALID_PAGE) // Both pages valid + Status = EEPROM_NO_VALID_PAGE; + else if (status1 == EEPROM_RECEIVE_DATA) + Status = EE_PageTransfer(PageBase1, PageBase0, 0xFFFF); + else + Status = EE_CheckErasePage(PageBase1, EEPROM_ERASED); + break; +/* + Page0 Page1 + ----- ----- + any EEPROM_VALID_PAGE Page1 valid, Page0 erased + EEPROM_RECEIVE_DATA Page1 valid, Page0 erased + any EEPROM_NO_VALID_PAGE +*/ + default: + if (status1 == EEPROM_VALID_PAGE) + Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED); // Check/Erase Page0 + else if (status1 == EEPROM_RECEIVE_DATA) + { + FlashStatus = FLASH_ProgramHalfWord(PageBase1, EEPROM_VALID_PAGE); + if (FlashStatus != FLASH_COMPLETE) + Status = FlashStatus; + else + Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED); + } + break; + } + return Status; +} + +/** + * @brief Erases PAGE0 and PAGE1 and writes EEPROM_VALID_PAGE / 0 header to PAGE0 + * @param PAGE0 and PAGE1 base addresses + * @retval Status of the last operation (Flash write or erase) done during EEPROM formating + */ +uint16_t EEPROM_format(void) +{ + uint16_t status; + FLASH_Status FlashStatus; + + FLASH_Unlock(); + + // Erase Page0 + status = EE_CheckErasePage(PageBase0, EEPROM_VALID_PAGE); + if (status != EEPROM_OK) + return status; + if ((*(__IO uint16_t*)PageBase0) == EEPROM_ERASED) + { + // Set Page0 as valid page: Write VALID_PAGE at Page0 base address + FlashStatus = FLASH_ProgramHalfWord(PageBase0, EEPROM_VALID_PAGE); + if (FlashStatus != FLASH_COMPLETE) + return FlashStatus; + } + // Erase Page1 + return EE_CheckErasePage(PageBase1, EEPROM_ERASED); +} + +/** + * @brief Returns the erase counter for current page + * @param Data: Global variable contains the read variable value + * @retval Success or error status: + * - EEPROM_OK: if erases counter return. + * - EEPROM_NO_VALID_PAGE: if no valid page was found. + */ +uint16_t EEPROM_erases(uint16_t *Erases) +{ + uint32_t pageBase; + if (Status != EEPROM_OK) + if (EEPROM_init() != EEPROM_OK) + return Status; + + // Get active Page for read operation + pageBase = EE_FindValidPage(); + if (pageBase == 0) + return EEPROM_NO_VALID_PAGE; + + *Erases = (*(__IO uint16_t*)pageBase+2); + return EEPROM_OK; +} + +/** + * @brief Returns the last stored variable data, if found, + * which correspond to the passed virtual address + * @param Address: Variable virtual address + * @retval Data for variable or EEPROM_DEFAULT_DATA, if any errors + */ +/* +uint16_t EEPROM_read (uint16_t Address) +{ + uint16_t data; + EEPROM_read(Address, &data); + return data; +}*/ + +/** + * @brief Returns the last stored variable data, if found, + * which correspond to the passed virtual address + * @param Address: Variable virtual address + * @param Data: Pointer to data variable + * @retval Success or error status: + * - EEPROM_OK: if variable was found + * - EEPROM_BAD_ADDRESS: if the variable was not found + * - EEPROM_NO_VALID_PAGE: if no valid page was found. + */ +uint16_t EEPROM_read(uint16_t Address, uint16_t *Data) +{ + uint32_t pageBase, pageEnd; + + // Set default data (empty EEPROM) + *Data = EEPROM_DEFAULT_DATA; + + if (Status == EEPROM_NOT_INIT) + if (EEPROM_init() != EEPROM_OK) + return Status; + + // Get active Page for read operation + pageBase = EE_FindValidPage(); + if (pageBase == 0) + return EEPROM_NO_VALID_PAGE; + + // Get the valid Page end Address + pageEnd = pageBase + ((uint32_t)(PageSize - 2)); + + // Check each active page address starting from end + for (pageBase += 6; pageEnd >= pageBase; pageEnd -= 4) + if ((*(__IO uint16_t*)pageEnd) == Address) // Compare the read address with the virtual address + { + *Data = (*(__IO uint16_t*)(pageEnd - 2)); // Get content of Address-2 which is variable value + return EEPROM_OK; + } + + // Return ReadStatus value: (0: variable exist, 1: variable doesn't exist) + return EEPROM_BAD_ADDRESS; +} + +/** + * @brief Writes/upadtes variable data in EEPROM. + * @param VirtAddress: Variable virtual address + * @param Data: 16 bit data to be written + * @retval Success or error status: + * - FLASH_COMPLETE: on success + * - EEPROM_BAD_ADDRESS: if address = 0xFFFF + * - EEPROM_PAGE_FULL: if valid page is full + * - EEPROM_NO_VALID_PAGE: if no valid page was found + * - EEPROM_OUT_SIZE: if no empty EEPROM variables + * - Flash error code: on write Flash error + */ +uint16_t EEPROM_write(uint16_t Address, uint16_t Data) +{ + if (Status == EEPROM_NOT_INIT) + if (EEPROM_init() != EEPROM_OK) + return Status; + + if (Address == 0xFFFF) + return EEPROM_BAD_ADDRESS; + + // Write the variable virtual address and value in the EEPROM + uint16_t status = EE_VerifyPageFullWriteVariable(Address, Data); + return status; +} + +/** + * @brief Writes/upadtes variable data in EEPROM. + The value is written only if differs from the one already saved at the same address. + * @param VirtAddress: Variable virtual address + * @param Data: 16 bit data to be written + * @retval Success or error status: + * - EEPROM_SAME_VALUE: If new Data matches existing EEPROM Data + * - FLASH_COMPLETE: on success + * - EEPROM_BAD_ADDRESS: if address = 0xFFFF + * - EEPROM_PAGE_FULL: if valid page is full + * - EEPROM_NO_VALID_PAGE: if no valid page was found + * - EEPROM_OUT_SIZE: if no empty EEPROM variables + * - Flash error code: on write Flash error + */ +uint16_t EEPROM_update(uint16_t Address, uint16_t Data) +{ + uint16_t temp; + EEPROM_read(Address, &temp); + if (Address == Data) + return EEPROM_SAME_VALUE; + else + return EEPROM_write(Address, Data); +} + +/** + * @brief Return number of variable + * @retval Number of variables + */ +uint16_t EEPROM_count(uint16_t *Count) +{ + if (Status == EEPROM_NOT_INIT) + if (EEPROM_init() != EEPROM_OK) + return Status; + + // Get valid Page for write operation + uint32_t pageBase = EE_FindValidPage(); + if (pageBase == 0) + return EEPROM_NO_VALID_PAGE; // No valid page, return max. numbers + + *Count = EE_GetVariablesCount(pageBase, 0xFFFF); + return EEPROM_OK; +} + +uint16_t EEPROM_maxcount(void) +{ + return ((PageSize / 4)-1); +} + + +uint8_t eeprom_read_byte (const uint8_t *Address) +{ + const uint16_t p = (const uint32_t) Address; + uint16_t temp; + EEPROM_read(p, &temp); + return (uint8_t) temp; +} + +void eeprom_write_byte (uint8_t *Address, uint8_t Value) +{ + uint16_t p = (uint32_t) Address; + EEPROM_write(p, (uint16_t) Value); +} + +void eeprom_update_byte (uint8_t *Address, uint8_t Value) +{ + uint16_t p = (uint32_t) Address; + EEPROM_update(p, (uint16_t) Value); +} + +uint16_t eeprom_read_word (const uint16_t *Address) +{ + const uint16_t p = (const uint32_t) Address; + uint16_t temp; + EEPROM_read(p, &temp); + return temp; +} + +void eeprom_write_word (uint16_t *Address, uint16_t Value) +{ + uint16_t p = (uint32_t) Address; + EEPROM_write(p, Value); +} + +void eeprom_update_word (uint16_t *Address, uint16_t Value) +{ + uint16_t p = (uint32_t) Address; + EEPROM_update(p, Value); +} + +uint32_t eeprom_read_dword (const uint32_t *Address) +{ + const uint16_t p = (const uint32_t) Address; + uint16_t temp1, temp2; + EEPROM_read(p, &temp1); + EEPROM_read(p + 1, &temp2); + return temp1 | (temp2 << 16); +} + +void eeprom_write_dword (uint32_t *Address, uint32_t Value) +{ + uint16_t temp = (uint16_t) Value; + uint16_t p = (uint32_t) Address; + EEPROM_write(p, temp); + temp = (uint16_t) (Value >> 16); + EEPROM_write(p + 1, temp); +} + +void eeprom_update_dword (uint32_t *Address, uint32_t Value) +{ + uint16_t temp = (uint16_t) Value; + uint16_t p = (uint32_t) Address; + EEPROM_update(p, temp); + temp = (uint16_t) (Value >> 16); + EEPROM_update(p + 1, temp); +} diff --git a/tmk_core/common/chibios/eeprom_stm32.h b/tmk_core/common/chibios/eeprom_stm32.h new file mode 100755 index 0000000000..d06d302665 --- /dev/null +++ b/tmk_core/common/chibios/eeprom_stm32.h @@ -0,0 +1,89 @@ +/* + * This software is experimental and a work in progress. + * Under no circumstances should these files be used in relation to any critical system(s). + * Use of these files is at your own risk. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR + * PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and + * https://github.com/leaflabs/libmaple + * + * Modifications for QMK and STM32F303 by Yiancar + */ + +// This file must be modified if the MCU is not defined below. +// This library also assumes that the pages are not used by the firmware. + +#ifndef __EEPROM_H +#define __EEPROM_H + +#include "ch.h" +#include "hal.h" +#include "flash_stm32.h" + +// HACK ALERT. This definition may not match your processor +// To Do. Work out correct value for EEPROM_PAGE_SIZE on the STM32F103CT6 etc +#define MCU_STM32F303CC + +#ifndef EEPROM_PAGE_SIZE + #if defined (MCU_STM32F103RB) + #define EEPROM_PAGE_SIZE (uint16_t)0x400 /* Page size = 1KByte */ + #elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103RE) || defined (MCU_STM32F103RD) || defined (MCU_STM32F303CC) + #define EEPROM_PAGE_SIZE (uint16_t)0x800 /* Page size = 2KByte */ + #else + #error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)." + #endif +#endif + +#ifndef EEPROM_START_ADDRESS + #if defined (MCU_STM32F103RB) + #define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 128 * 1024 - 2 * EEPROM_PAGE_SIZE)) + #elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103RE) + #define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 512 * 1024 - 2 * EEPROM_PAGE_SIZE)) + #elif defined (MCU_STM32F103RD) + #define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 384 * 1024 - 2 * EEPROM_PAGE_SIZE)) + #elif defined (MCU_STM32F303CC) + #define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 250 * 1024 - 2 * EEPROM_PAGE_SIZE)) + #else + #error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)." + #endif +#endif + +/* Pages 0 and 1 base and end addresses */ +#define EEPROM_PAGE0_BASE ((uint32_t)(EEPROM_START_ADDRESS + 0x000)) +#define EEPROM_PAGE1_BASE ((uint32_t)(EEPROM_START_ADDRESS + EEPROM_PAGE_SIZE)) + +/* Page status definitions */ +#define EEPROM_ERASED ((uint16_t)0xFFFF) /* PAGE is empty */ +#define EEPROM_RECEIVE_DATA ((uint16_t)0xEEEE) /* PAGE is marked to receive data */ +#define EEPROM_VALID_PAGE ((uint16_t)0x0000) /* PAGE containing valid data */ + +/* Page full define */ +enum uint16_t + { + EEPROM_OK = ((uint16_t)0x0000), + EEPROM_OUT_SIZE = ((uint16_t)0x0081), + EEPROM_BAD_ADDRESS = ((uint16_t)0x0082), + EEPROM_BAD_FLASH = ((uint16_t)0x0083), + EEPROM_NOT_INIT = ((uint16_t)0x0084), + EEPROM_SAME_VALUE = ((uint16_t)0x0085), + EEPROM_NO_VALID_PAGE = ((uint16_t)0x00AB) + }; + +#define EEPROM_DEFAULT_DATA 0xFFFF + + uint16_t EEPROM_init(void); + uint16_t EEPROM_format(void); + uint16_t EEPROM_erases(uint16_t *); + uint16_t EEPROM_read (uint16_t address, uint16_t *data); + uint16_t EEPROM_write(uint16_t address, uint16_t data); + uint16_t EEPROM_update(uint16_t address, uint16_t data); + uint16_t EEPROM_count(uint16_t *); + uint16_t EEPROM_maxcount(void); + +#endif /* __EEPROM_H */ diff --git a/tmk_core/common/chibios/eeprom.c b/tmk_core/common/chibios/eeprom_teensy.c index 9061b790c4..9061b790c4 100644 --- a/tmk_core/common/chibios/eeprom.c +++ b/tmk_core/common/chibios/eeprom_teensy.c diff --git a/tmk_core/common/chibios/flash_stm32.c b/tmk_core/common/chibios/flash_stm32.c new file mode 100755 index 0000000000..e7199ac7b1 --- /dev/null +++ b/tmk_core/common/chibios/flash_stm32.c @@ -0,0 +1,180 @@ +/* + * This software is experimental and a work in progress. + * Under no circumstances should these files be used in relation to any critical system(s). + * Use of these files is at your own risk. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR + * PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and + * https://github.com/leaflabs/libmaple + * + * Modifications for QMK and STM32F303 by Yiancar + */ + +#define STM32F303xC + +#include "stm32f3xx.h" +#include "flash_stm32.h" + +#define FLASH_KEY1 ((uint32_t)0x45670123) +#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) + +/* Delay definition */ +#define EraseTimeout ((uint32_t)0x00000FFF) +#define ProgramTimeout ((uint32_t)0x0000001F) + +#define ASSERT(exp) (void)((0)) + +/** + * @brief Inserts a time delay. + * @param None + * @retval None + */ +static void delay(void) +{ + __IO uint32_t i = 0; + for(i = 0xFF; i != 0; i--) { } +} + +/** + * @brief Returns the FLASH Status. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetStatus(void) +{ + if ((FLASH->SR & FLASH_SR_BSY) == FLASH_SR_BSY) + return FLASH_BUSY; + + if ((FLASH->SR & FLASH_SR_PGERR) != 0) + return FLASH_ERROR_PG; + + if ((FLASH->SR & FLASH_SR_WRPERR) != 0 ) + return FLASH_ERROR_WRP; + + if ((FLASH->SR & FLASH_OBR_OPTERR) != 0 ) + return FLASH_ERROR_OPT; + + return FLASH_COMPLETE; +} + +/** + * @brief Waits for a Flash operation to complete or a TIMEOUT to occur. + * @param Timeout: FLASH progamming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) +{ + FLASH_Status status; + + /* Check for the Flash Status */ + status = FLASH_GetStatus(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while ((status == FLASH_BUSY) && (Timeout != 0x00)) + { + delay(); + status = FLASH_GetStatus(); + Timeout--; + } + if (Timeout == 0) + status = FLASH_TIMEOUT; + /* Return the operation status */ + return status; +} + +/** + * @brief Erases a specified FLASH page. + * @param Page_Address: The page address to be erased. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ErasePage(uint32_t Page_Address) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + ASSERT(IS_FLASH_ADDRESS(Page_Address)); + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR |= FLASH_CR_PER; + FLASH->AR = Page_Address; + FLASH->CR |= FLASH_CR_STRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the erase operation is completed, disable the PER Bit */ + FLASH->CR &= ~FLASH_CR_PER; + } + FLASH->SR = (FLASH_SR_EOP | FLASH_SR_PGERR | FLASH_SR_WRPERR); + } + /* Return the Erase Status */ + return status; +} + +/** + * @brief Programs a half word at a specified address. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) +{ + FLASH_Status status = FLASH_BAD_ADDRESS; + + if (IS_FLASH_ADDRESS(Address)) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR |= FLASH_CR_PG; + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the PG Bit */ + FLASH->CR &= ~FLASH_CR_PG; + } + FLASH->SR = (FLASH_SR_EOP | FLASH_SR_PGERR | FLASH_SR_WRPERR); + } + } + return status; +} + +/** + * @brief Unlocks the FLASH Program Erase Controller. + * @param None + * @retval None + */ +void FLASH_Unlock(void) +{ + /* Authorize the FPEC Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; +} + +/** + * @brief Locks the FLASH Program Erase Controller. + * @param None + * @retval None + */ +void FLASH_Lock(void) +{ + /* Set the Lock Bit to lock the FPEC and the FCR */ + FLASH->CR |= FLASH_CR_LOCK; +} diff --git a/tmk_core/common/chibios/flash_stm32.h b/tmk_core/common/chibios/flash_stm32.h new file mode 100755 index 0000000000..cc065cbca2 --- /dev/null +++ b/tmk_core/common/chibios/flash_stm32.h @@ -0,0 +1,53 @@ +/* + * This software is experimental and a work in progress. + * Under no circumstances should these files be used in relation to any critical system(s). + * Use of these files is at your own risk. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR + * PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and + * https://github.com/leaflabs/libmaple + * + * Modifications for QMK and STM32F303 by Yiancar + */ + +#ifndef __FLASH_STM32_H +#define __FLASH_STM32_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "ch.h" +#include "hal.h" + +typedef enum + { |