summaryrefslogtreecommitdiffstats
path: root/tmk_core/common/chibios
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/common/chibios')
-rw-r--r--tmk_core/common/chibios/_wait.h55
-rw-r--r--tmk_core/common/chibios/chibios_config.h3
-rw-r--r--tmk_core/common/chibios/sleep_led.c88
-rw-r--r--tmk_core/common/chibios/suspend.c8
-rw-r--r--tmk_core/common/chibios/wait.c89
5 files changed, 188 insertions, 55 deletions
diff --git a/tmk_core/common/chibios/_wait.h b/tmk_core/common/chibios/_wait.h
new file mode 100644
index 0000000000..5bface53e1
--- /dev/null
+++ b/tmk_core/common/chibios/_wait.h
@@ -0,0 +1,55 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include <ch.h>
+
+/* chThdSleepX of zero maps to infinite - so we map to a tiny delay to still yield */
+#define wait_ms(ms) \
+ do { \
+ if (ms != 0) { \
+ chThdSleepMilliseconds(ms); \
+ } else { \
+ chThdSleepMicroseconds(1); \
+ } \
+ } while (0)
+#define wait_us(us) \
+ do { \
+ if (us != 0) { \
+ chThdSleepMicroseconds(us); \
+ } else { \
+ chThdSleepMicroseconds(1); \
+ } \
+ } while (0)
+
+/* For GPIOs on ARM-based MCUs, the input pins are sampled by the clock of the bus
+ * to which the GPIO is connected.
+ * The connected buses differ depending on the various series of MCUs.
+ * And since the instruction execution clock of the CPU and the bus clock of GPIO are different,
+ * there is a delay of several clocks to read the change of the input signal.
+ *
+ * Define this delay with the GPIO_INPUT_PIN_DELAY macro.
+ * If the GPIO_INPUT_PIN_DELAY macro is not defined, the following default values will be used.
+ * (A fairly large value of 0.25 microseconds is set.)
+ */
+
+#include "wait.c"
+
+#ifndef GPIO_INPUT_PIN_DELAY
+# define GPIO_INPUT_PIN_DELAY (STM32_SYSCLK / 1000000L / 4)
+#endif
+
+#define waitInputPinDelay() wait_cpuclock(GPIO_INPUT_PIN_DELAY)
diff --git a/tmk_core/common/chibios/chibios_config.h b/tmk_core/common/chibios/chibios_config.h
index b4d96465d1..9a66ac3174 100644
--- a/tmk_core/common/chibios/chibios_config.h
+++ b/tmk_core/common/chibios/chibios_config.h
@@ -15,6 +15,8 @@
*/
#pragma once
+#define SPLIT_USB_DETECT // Force this on for now
+
#if defined(STM32F1XX)
# define USE_GPIOV1
#endif
@@ -28,4 +30,5 @@
# define USE_I2CV1
# define USE_I2CV1_CONTRIB // for some reason a bunch of ChibiOS-Contrib boards only have clock_speed
# define USE_GPIOV1
+# define STM32_SYSCLK KINETIS_SYSCLK_FREQUENCY
#endif
diff --git a/tmk_core/common/chibios/sleep_led.c b/tmk_core/common/chibios/sleep_led.c
index 5595eec0e5..477056a454 100644
--- a/tmk_core/common/chibios/sleep_led.c
+++ b/tmk_core/common/chibios/sleep_led.c
@@ -9,21 +9,13 @@
* Use LP timer on Kinetises, TIM14 on STM32F0.
*/
-#if defined(KL2x) || defined(K20x)
-
-/* Use Low Power Timer (LPTMR) */
-# define TIMER_INTERRUPT_VECTOR KINETIS_LPTMR0_IRQ_VECTOR
-# define RESET_COUNTER LPTMR0->CSR |= LPTMRx_CSR_TCF
-
-#elif defined(STM32F0XX)
-
-/* Use TIM14 manually */
-# define TIMER_INTERRUPT_VECTOR STM32_TIM14_HANDLER
-# define RESET_COUNTER STM32_TIM14->SR &= ~STM32_TIM_SR_UIF
-
+#ifndef SLEEP_LED_GPT_DRIVER
+# if defined(STM32F0XX)
+# define SLEEP_LED_GPT_DRIVER GPTD14
+# endif
#endif
-#if defined(KL2x) || defined(K20x) || defined(STM32F0XX) /* common parts for timers/interrupts */
+#if defined(KL2x) || defined(K20x) || defined(SLEEP_LED_GPT_DRIVER) /* common parts for timers/interrupts */
/* Breathing Sleep LED brighness(PWM On period) table
* (64[steps] * 4[duration]) / 64[PWM periods/s] = 4 second breath cycle
@@ -33,10 +25,7 @@
*/
static const uint8_t breathing_table[64] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 4, 6, 10, 15, 23, 32, 44, 58, 74, 93, 113, 135, 157, 179, 199, 218, 233, 245, 252, 255, 252, 245, 233, 218, 199, 179, 157, 135, 113, 93, 74, 58, 44, 32, 23, 15, 10, 6, 4, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-/* interrupt handler */
-OSAL_IRQ_HANDLER(TIMER_INTERRUPT_VECTOR) {
- OSAL_IRQ_PROLOGUE();
-
+void sleep_led_timer_callback(void) {
/* Software PWM
* timer:1111 1111 1111 1111
* \_____/\/ \_______/____ count(0-255)
@@ -64,17 +53,16 @@ OSAL_IRQ_HANDLER(TIMER_INTERRUPT_VECTOR) {
if (timer.pwm.count == breathing_table[timer.pwm.index]) {
led_set(0);
}
-
- /* Reset the counter */
- RESET_COUNTER;
-
- OSAL_IRQ_EPILOGUE();
}
#endif /* common parts for known platforms */
#if defined(KL2x) || defined(K20x) /* platform selection: familiar Kinetis chips */
+/* Use Low Power Timer (LPTMR) */
+# define TIMER_INTERRUPT_VECTOR KINETIS_LPTMR0_IRQ_VECTOR
+# define RESET_COUNTER LPTMR0->CSR |= LPTMRx_CSR_TCF
+
/* LPTMR clock options */
# define LPTMR_CLOCK_MCGIRCLK 0 /* 4MHz clock */
# define LPTMR_CLOCK_LPO 1 /* 1kHz clock */
@@ -86,6 +74,18 @@ OSAL_IRQ_HANDLER(TIMER_INTERRUPT_VECTOR) {
# define SIM_SCGC5_LPTMR SIM_SCGC5_LPTIMER
# endif
+/* interrupt handler */
+OSAL_IRQ_HANDLER(TIMER_INTERRUPT_VECTOR) {
+ OSAL_IRQ_PROLOGUE();
+
+ sleep_led_timer_callback();
+
+ /* Reset the counter */
+ RESET_COUNTER;
+
+ OSAL_IRQ_EPILOGUE();
+}
+
/* Initialise the timer */
void sleep_led_init(void) {
/* Make sure the clock to the LPTMR is enabled */
@@ -159,45 +159,23 @@ void sleep_led_toggle(void) {
LPTMR0->CSR ^= LPTMRx_CSR_TEN;
}
-#elif defined(STM32F0XX) /* platform selection: STM32F0XX */
-
-/* Initialise the timer */
-void sleep_led_init(void) {
- /* enable clock */
- rccEnableTIM14(FALSE); /* low power enable = FALSE */
- rccResetTIM14();
-
- /* prescale */
- /* Assuming 48MHz internal clock */
- /* getting cca 65484 irqs/sec */
- STM32_TIM14->PSC = 733;
+#elif defined(SLEEP_LED_GPT_DRIVER)
- /* auto-reload */
- /* 0 => interrupt every time */
- STM32_TIM14->ARR = 3;
+static void gptTimerCallback(GPTDriver *gptp) {
+ (void)gptp;
+ sleep_led_timer_callback();
+}
- /* enable counter update event interrupt */
- STM32_TIM14->DIER |= STM32_TIM_DIER_UIE;
+static const GPTConfig gptcfg = {1000000, gptTimerCallback, 0, 0};
- /* register interrupt vector */
- nvicEnableVector(STM32_TIM14_NUMBER, 2); /* vector, priority */
-}
+/* Initialise the timer */
+void sleep_led_init(void) { gptStart(&SLEEP_LED_GPT_DRIVER, &gptcfg); }
-void sleep_led_enable(void) {
- /* Enable the timer */
- STM32_TIM14->CR1 = STM32_TIM_CR1_CEN | STM32_TIM_CR1_URS;
- /* URS => update event only on overflow; setting UG bit disabled */
-}
+void sleep_led_enable(void) { gptStartContinuous(&SLEEP_LED_GPT_DRIVER, gptcfg.frequency / 0xFFFF); }
-void sleep_led_disable(void) {
- /* Disable the timer */
- STM32_TIM14->CR1 = 0;
-}
+void sleep_led_disable(void) { gptStopTimer(&SLEEP_LED_GPT_DRIVER); }
-void sleep_led_toggle(void) {
- /* Toggle the timer */
- STM32_TIM14->CR1 ^= STM32_TIM_CR1_CEN;
-}
+void sleep_led_toggle(void) { (SLEEP_LED_GPT_DRIVER.state == GPT_READY) ? sleep_led_enable() : sleep_led_disable(); }
#else /* platform selection: not on familiar chips */
diff --git a/tmk_core/common/chibios/suspend.c b/tmk_core/common/chibios/suspend.c
index 49e20641fb..17f024caba 100644
--- a/tmk_core/common/chibios/suspend.c
+++ b/tmk_core/common/chibios/suspend.c
@@ -24,6 +24,10 @@
# include "rgblight.h"
#endif
+#ifdef RGB_MATRIX_ENABLE
+# include "rgb_matrix.h"
+#endif
+
/** \brief suspend idle
*
* FIXME: needs doc
@@ -53,6 +57,10 @@ void suspend_power_down(void) {
backlight_set(0);
#endif
+#ifdef RGB_MATRIX_ENABLE
+ rgb_matrix_task();
+#endif
+
// Turn off LED indicators
uint8_t leds_off = 0;
#if defined(BACKLIGHT_CAPS_LOCK) && defined(BACKLIGHT_ENABLE)
diff --git a/tmk_core/common/chibios/wait.c b/tmk_core/common/chibios/wait.c
new file mode 100644
index 0000000000..c6270fd95e
--- /dev/null
+++ b/tmk_core/common/chibios/wait.c
@@ -0,0 +1,89 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OPTIMIZE__
+# pragma message "Compiler optimizations disabled; wait_cpuclock() won't work as designed"
+#endif
+
+#define CLOCK_DELAY_NOP8 "nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t"
+
+__attribute__((always_inline)) static inline void wait_cpuclock(unsigned int n) { /* n: 1..135 */
+ /* The argument n must be a constant expression.
+ * That way, compiler optimization will remove unnecessary code. */
+ if (n < 1) {
+ return;
+ }
+ if (n > 8) {
+ unsigned int n8 = n / 8;
+ n = n - n8 * 8;
+ switch (n8) {
+ case 16:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 15:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 14:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 13:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 12:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 11:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 10:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 9:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 8:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 7:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 6:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 5:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 4:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 3:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 2:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 1:
+ asm volatile(CLOCK_DELAY_NOP8::: "memory");
+ case 0:
+ break;
+ }
+ }
+ switch (n) {
+ case 8:
+ asm volatile("nop" ::: "memory");
+ case 7:
+ asm volatile("nop" ::: "memory");
+ case 6:
+ asm volatile("nop" ::: "memory");
+ case 5:
+ asm volatile("nop" ::: "memory");
+ case 4:
+ asm volatile("nop" ::: "memory");
+ case 3:
+ asm volatile("nop" ::: "memory");
+ case 2:
+ asm volatile("nop" ::: "memory");
+ case 1:
+ asm volatile("nop" ::: "memory");
+ case 0:
+ break;
+ }
+} \ No newline at end of file