1 files changed, 145 insertions, 0 deletions
diff --git a/quantum/split_common/split_util.c b/quantum/split_common/split_util.c
new file mode 100644
index 0000000000..340a631375
--- /dev/null
+++ b/quantum/split_common/split_util.c
@@ -0,0 +1,145 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+#include "split_flags.h"
+
+#ifdef RGBLIGHT_ENABLE
+#   include "rgblight.h"
+#endif
+#ifdef BACKLIGHT_ENABLE
+#   include "backlight.h"
+#endif
+
+#ifdef SPLIT_HAND_PIN
+#   include "pincontrol.h"
+#endif
+
+#if defined(USE_I2C) || defined(EH)
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+volatile uint8_t setTries = 0;
+
+static void setup_handedness(void) {
+  #ifdef SPLIT_HAND_PIN
+    // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
+    pinMode(SPLIT_HAND_PIN, PinDirectionInput);
+    isLeftHand = digitalRead(SPLIT_HAND_PIN);
+  #else
+    #ifdef EE_HANDS
+      isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+    #else
+      // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+      #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+        isLeftHand = !has_usb();
+      #else
+        isLeftHand = has_usb();
+      #endif
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#if defined(USE_I2C) || defined(EH)
+  i2c_master_init();
+  #ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+  #endif
+#else
+  serial_master_init();
+#endif
+
+    // For master the Backlight info needs to be sent on startup
+    // Otherwise the salve won't start with the proper info until an update
+    BACKLIT_DIRTY = true;
+}
+
+static void keyboard_slave_setup(void) {
+  timer_init();
+#if defined(USE_I2C) || defined(EH)
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+   
+   //Init RGB
+   #ifdef RGBLIGHT_ENABLE
+      rgblight_init();
+   #endif
+
+   while (1) {
+      matrix_slave_scan();
+      
+      // read backlight info
+    #ifdef BACKLIGHT_ENABLE
+        if (BACKLIT_DIRTY) {
+            backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
+            BACKLIT_DIRTY = false;
+        }
+    #endif
+    #ifdef RGBLIGHT_ENABLE
+        if (RGB_DIRTY) {
+            cli();
+            uint32_t dword;
+            
+            /*dword = i2c_slave_buffer[I2C_RGB_START + 3];
+            dword = (dword << 8) + i2c_slave_buffer[I2C_RGB_START + 2];
+            dword = (dword << 8) + i2c_slave_buffer[I2C_RGB_START + 1];
+            dword = (dword << 8) + i2c_slave_buffer[I2C_RGB_START];*/
+            
+            
+            uint8_t *dword_dat = (uint8_t *)(&dword);
+            for (int i = 0; i < 4; i++) {
+                dword_dat[i] = i2c_slave_buffer[I2C_RGB_START+i];
+            }
+
+            rgblight_update_dword(dword);
+            RGB_DIRTY = false;
+            sei();
+        }
+    #endif
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        //rgblight_init();
+        keyboard_slave_loop();
+    }
+}