diff options
Diffstat (limited to 'quantum/backlight/backlight_arm.c')
| -rw-r--r-- | quantum/backlight/backlight_arm.c | 218 |
1 files changed, 218 insertions, 0 deletions
diff --git a/quantum/backlight/backlight_arm.c b/quantum/backlight/backlight_arm.c new file mode 100644 index 0000000000..3f94ccef8e --- /dev/null +++ b/quantum/backlight/backlight_arm.c @@ -0,0 +1,218 @@ +#include "quantum.h" +#include "backlight.h" +#include <hal.h> +#include "debug.h" + +// TODO: remove short term bodge when refactoring BACKLIGHT_CUSTOM_DRIVER out +#ifdef BACKLIGHT_PIN + +# if defined(STM32F0XX) || defined(STM32F0xx) +# error "Backlight support for STMF072 is not available. Please disable." +# endif + +# if defined(STM32F1XX) || defined(STM32F1xx) +# define USE_GPIOV1 +# endif + +// GPIOV2 && GPIOV3 +# ifndef BACKLIGHT_PAL_MODE +# define BACKLIGHT_PAL_MODE 2 +# endif + +// GENERIC +# ifndef BACKLIGHT_PWM_DRIVER +# define BACKLIGHT_PWM_DRIVER PWMD4 +# endif +# ifndef BACKLIGHT_PWM_CHANNEL +# define BACKLIGHT_PWM_CHANNEL 3 +# endif + +static void breathing_callback(PWMDriver *pwmp); + +static PWMConfig pwmCFG = {0xFFFF, /* PWM clock frequency */ + 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ + NULL, /* No Callback */ + { /* Default all channels to disabled - Channels will be configured durring init */ + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}}, + 0, /* HW dependent part.*/ + 0}; + +static PWMConfig pwmCFG_breathing = {0xFFFF, /** PWM clock frequency */ + 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ + breathing_callback, /* Breathing Callback */ + { /* Default all channels to disabled - Channels will be configured durring init */ + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}}, + 0, /* HW dependent part.*/ + 0}; + +// See http://jared.geek.nz/2013/feb/linear-led-pwm +static uint16_t cie_lightness(uint16_t v) { + if (v <= 5243) // if below 8% of max + return v / 9; // same as dividing by 900% + else { + uint32_t y = (((uint32_t)v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare + // to get a useful result with integer division, we shift left in the expression above + // and revert what we've done again after squaring. + y = y * y * y >> 8; + if (y > 0xFFFFUL) // prevent overflow + return 0xFFFFU; + else + return (uint16_t)y; + } +} + +void backlight_init_ports(void) { + // printf("backlight_init_ports()\n"); + +# ifdef USE_GPIOV1 + palSetPadMode(PAL_PORT(BACKLIGHT_PIN), PAL_PAD(BACKLIGHT_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL); +# else + palSetPadMode(PAL_PORT(BACKLIGHT_PIN), PAL_PAD(BACKLIGHT_PIN), PAL_MODE_ALTERNATE(BACKLIGHT_PAL_MODE)); +# endif + + pwmCFG.channels[BACKLIGHT_PWM_CHANNEL - 1].mode = PWM_OUTPUT_ACTIVE_HIGH; + pwmCFG_breathing.channels[BACKLIGHT_PWM_CHANNEL - 1].mode = PWM_OUTPUT_ACTIVE_HIGH; + pwmStart(&BACKLIGHT_PWM_DRIVER, &pwmCFG); + + backlight_set(get_backlight_level()); + if (is_backlight_breathing()) { + breathing_enable(); + } +} + +void backlight_set(uint8_t level) { + // printf("backlight_set(%d)\n", level); + if (level == 0) { + // Turn backlight off + pwmDisableChannel(&BACKLIGHT_PWM_DRIVER, BACKLIGHT_PWM_CHANNEL - 1); + } else { + // Turn backlight on + if (!is_breathing()) { + uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t)level / BACKLIGHT_LEVELS)); + // printf("duty: (%d)\n", duty); + pwmEnableChannel(&BACKLIGHT_PWM_DRIVER, BACKLIGHT_PWM_CHANNEL - 1, PWM_FRACTION_TO_WIDTH(&BACKLIGHT_PWM_DRIVER, 0xFFFF, duty)); + } + } +} + +uint8_t backlight_tick = 0; + +void backlight_task(void) {} + +# define BREATHING_NO_HALT 0 +# define BREATHING_HALT_OFF 1 +# define BREATHING_HALT_ON 2 +# define BREATHING_STEPS 128 + +static uint8_t breathing_period = BREATHING_PERIOD; +static uint8_t breathing_halt = BREATHING_NO_HALT; +static uint16_t breathing_counter = 0; + +bool is_breathing(void) { return BACKLIGHT_PWM_DRIVER.config == &pwmCFG_breathing; } + +static inline void breathing_min(void) { breathing_counter = 0; } + +static inline void breathing_max(void) { breathing_counter = breathing_period * 256 / 2; } + +void breathing_interrupt_enable(void) { + pwmStop(&BACKLIGHT_PWM_DRIVER); + pwmStart(&BACKLIGHT_PWM_DRIVER, &pwmCFG_breathing); + chSysLockFromISR(); + pwmEnablePeriodicNotification(&BACKLIGHT_PWM_DRIVER); + pwmEnableChannelI(&BACKLIGHT_PWM_DRIVER, BACKLIGHT_PWM_CHANNEL - 1, PWM_FRACTION_TO_WIDTH(&BACKLIGHT_PWM_DRIVER, 0xFFFF, 0xFFFF)); + chSysUnlockFromISR(); +} + +void breathing_interrupt_disable(void) { + pwmStop(&BACKLIGHT_PWM_DRIVER); + pwmStart(&BACKLIGHT_PWM_DRIVER, &pwmCFG); +} + +void breathing_enable(void) { + breathing_counter = 0; + breathing_halt = BREATHING_NO_HALT; + breathing_interrupt_enable(); +} + +void breathing_pulse(void) { + if (get_backlight_level() == 0) + breathing_min(); + else + breathing_max(); + breathing_halt = BREATHING_HALT_ON; + breathing_interrupt_enable(); +} + +void breathing_disable(void) { + // printf("breathing_disable()\n"); + breathing_interrupt_disable(); + // Restore backlight level + backlight_set(get_backlight_level()); +} + +void breathing_self_disable(void) { + if (get_backlight_level() == 0) + breathing_halt = BREATHING_HALT_OFF; + else + breathing_halt = BREATHING_HALT_ON; +} + +void breathing_toggle(void) { + if (is_breathing()) + breathing_disable(); + else + breathing_enable(); +} + +void breathing_period_set(uint8_t value) { + if (!value) value = 1; + breathing_period = value; +} + +void breathing_period_default(void) { breathing_period_set(BREATHING_PERIOD); } + +void breathing_period_inc(void) { breathing_period_set(breathing_period + 1); } + +void breathing_period_dec(void) { breathing_period_set(breathing_period - 1); } + +/* To generate breathing curve in python: + * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] + */ +static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + +// Use this before the cie_lightness function. +static inline uint16_t scale_backlight(uint16_t v) { return v / BACKLIGHT_LEVELS * get_backlight_level(); } + +static void breathing_callback(PWMDriver *pwmp) { + (void)pwmp; + uint16_t interval = (uint16_t)breathing_period * 256 / BREATHING_STEPS; + // resetting after one period to prevent ugly reset at overflow. + breathing_counter = (breathing_counter + 1) % (breathing_period * 256); + uint8_t index = breathing_counter / interval % BREATHING_STEPS; + + if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) { + breathing_interrupt_disable(); + } + + uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256)); + + chSysLockFromISR(); + pwmEnableChannelI(&BACKLIGHT_PWM_DRIVER, BACKLIGHT_PWM_CHANNEL - 1, PWM_FRACTION_TO_WIDTH(&BACKLIGHT_PWM_DRIVER, 0xFFFF, duty)); + chSysUnlockFromISR(); +} + +#else + +__attribute__((weak)) void backlight_init_ports(void) {} + +__attribute__((weak)) void backlight_set(uint8_t level) {} + +__attribute__((weak)) void backlight_task(void) {} + +#endif |