diff options
Diffstat (limited to 'protocol')
42 files changed, 8139 insertions, 0 deletions
diff --git a/protocol/usb_hid/README b/protocol/usb_hid/README new file mode 100644 index 0000000000..0acf677f8b --- /dev/null +++ b/protocol/usb_hid/README @@ -0,0 +1,9 @@ +Third party Libraries +--------------------- +USB_Host_Shield_2.0 + Circuits@Home repository is git-submoduled. Do git submodule init & update to get the content. + https://github.com/felis/USB_Host_Shield_2.0 + +arduino-1.0.1 + Arduino files copied from: + https://github.com/arduino/Arduino/hardware/arduino/{cores,variants} diff --git a/protocol/usb_hid/USB_Host_Shield_2.0 b/protocol/usb_hid/USB_Host_Shield_2.0 new file mode 160000 +Subproject d2ae0b4cd47d4ee88eb93177acb142299025e2e diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h new file mode 100644 index 0000000000..830c9952fb --- /dev/null +++ b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h @@ -0,0 +1,215 @@ +#ifndef Arduino_h +#define Arduino_h + +#include <stdlib.h> +#include <string.h> +#include <math.h> + +#include <avr/pgmspace.h> +#include <avr/io.h> +#include <avr/interrupt.h> + +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 +#define INPUT_PULLUP 0x2 + +#define true 0x1 +#define false 0x0 + +#define PI 3.1415926535897932384626433832795 +#define HALF_PI 1.5707963267948966192313216916398 +#define TWO_PI 6.283185307179586476925286766559 +#define DEG_TO_RAD 0.017453292519943295769236907684886 +#define RAD_TO_DEG 57.295779513082320876798154814105 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) +#define DEFAULT 0 +#define EXTERNAL 1 +#define INTERNAL 2 +#else +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1284P__) +#define INTERNAL1V1 2 +#define INTERNAL2V56 3 +#else +#define INTERNAL 3 +#endif +#define DEFAULT 1 +#define EXTERNAL 0 +#endif + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) +#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) + +#define lowByte(w) ((uint8_t) ((w) & 0xff)) +#define highByte(w) ((uint8_t) ((w) >> 8)) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + + +typedef unsigned int word; + +#define bit(b) (1UL << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. + +#define analogInPinToBit(P) (P) + +// On the ATmega1280, the addresses of some of the port registers are +// greater than 255, so we can't store them in uint8_t's. +extern const uint16_t PROGMEM port_to_mode_PGM[]; +extern const uint16_t PROGMEM port_to_input_PGM[]; +extern const uint16_t PROGMEM port_to_output_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; +// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. +// +// These perform slightly better as macros compared to inline functions +// +#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) +#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) +#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) +#define analogInPinToBit(P) (P) +#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) ) +#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) ) +#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) ) + +#define NOT_A_PIN 0 +#define NOT_A_PORT 0 + +#ifdef ARDUINO_MAIN +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 +#define PE 5 +#define PF 6 +#define PG 7 +#define PH 8 +#define PJ 10 +#define PK 11 +#define PL 12 +#endif + +#define NOT_ON_TIMER 0 +#define TIMER0A 1 +#define TIMER0B 2 +#define TIMER1A 3 +#define TIMER1B 4 +#define TIMER2 5 +#define TIMER2A 6 +#define TIMER2B 7 + +#define TIMER3A 8 +#define TIMER3B 9 +#define TIMER3C 10 +#define TIMER4A 11 +#define TIMER4B 12 +#define TIMER4C 13 +#define TIMER4D 14 +#define TIMER5A 15 +#define TIMER5B 16 +#define TIMER5C 17 + +#ifdef __cplusplus +} // extern "C" +#endif + +#ifdef __cplusplus +#include "WCharacter.h" +#include "WString.h" +#include "HardwareSerial.h" + +uint16_t makeWord(uint16_t w); +uint16_t makeWord(byte h, byte l); + +#define word(...) makeWord(__VA_ARGS__) + +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); +void noTone(uint8_t _pin); + +// WMath prototypes +long random(long); +long random(long, long); +void randomSeed(unsigned int); +long map(long, long, long, long, long); + +#endif + +#include "pins_arduino.h" + +#endif diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp b/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp new file mode 100644 index 0000000000..1ee3a488a5 --- /dev/null +++ b/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp @@ -0,0 +1,233 @@ + + +/* Copyright (c) 2011, Peter Barrett +** +** Permission to use, copy, modify, and/or distribute this software for +** any purpose with or without fee is hereby granted, provided that the +** above copyright notice and this permission notice appear in all copies. +** +** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL +** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR +** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES +** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +** SOFTWARE. +*/ + +#include "Platform.h" +#include "USBAPI.h" +#include <avr/wdt.h> + +#if defined(USBCON) +#ifdef CDC_ENABLED + +#if (RAMEND < 1000) +#define SERIAL_BUFFER_SIZE 16 +#else +#define SERIAL_BUFFER_SIZE 64 +#endif + +struct ring_buffer +{ + unsigned char buffer[SERIAL_BUFFER_SIZE]; + volatile int head; + volatile int tail; +}; + +ring_buffer cdc_rx_buffer = { { 0 }, 0, 0}; + +typedef struct +{ + u32 dwDTERate; + u8 bCharFormat; + u8 bParityType; + u8 bDataBits; + u8 lineState; +} LineInfo; + +static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; + +#define WEAK __attribute__ ((weak)) + +extern const CDCDescriptor _cdcInterface PROGMEM; +const CDCDescriptor _cdcInterface = +{ + D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), + + // CDC communication interface + D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), + D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) + D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not) + D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported + D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 + D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), + + // CDC data interface + D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), + D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), + D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) +}; + +int WEAK CDC_GetInterface(u8* interfaceNum) +{ + interfaceNum[0] += 2; // uses 2 + return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface)); +} + +bool WEAK CDC_Setup(Setup& setup) +{ + u8 r = setup.bRequest; + u8 requestType = setup.bmRequestType; + + if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) + { + if (CDC_GET_LINE_CODING == r) + { + USB_SendControl(0,(void*)&_usbLineInfo,7); + return true; + } + } + + if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) + { + if (CDC_SET_LINE_CODING == r) + { + USB_RecvControl((void*)&_usbLineInfo,7); + return true; + } + + if (CDC_SET_CONTROL_LINE_STATE == r) + { + _usbLineInfo.lineState = setup.wValueL; + + // auto-reset into the bootloader is triggered when the port, already + // open at 1200 bps, is closed. this is the signal to start the watchdog + // with a relatively long period so it can finish housekeeping tasks + // like servicing endpoints before the sketch ends + if (1200 == _usbLineInfo.dwDTERate) { + // We check DTR state to determine if host port is open (bit 0 of lineState). + if ((_usbLineInfo.lineState & 0x01) == 0) { + *(uint16_t *)0x0800 = 0x7777; + wdt_enable(WDTO_120MS); + } else { + // Most OSs do some intermediate steps when configuring ports and DTR can + // twiggle more than once before stabilizing. + // To avoid spurious resets we set the watchdog to 250ms and eventually + // cancel if DTR goes back high. + + wdt_disable(); + wdt_reset(); + *(uint16_t *)0x0800 = 0x0; + } + } + return true; + } + } + return false; +} + + +int _serialPeek = -1; +void Serial_::begin(uint16_t baud_count) +{ +} + +void Serial_::end(void) +{ +} + +void Serial_::accept(void) +{ + ring_buffer *buffer = &cdc_rx_buffer; + int c = USB_Recv(CDC_RX); + int i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != buffer->tail) { + buffer->buffer[buffer->head] = c; + buffer->head = i; + } +} + +int Serial_::available(void) +{ + ring_buffer *buffer = &cdc_rx_buffer; + return (unsigned int)(SERIAL_BUFFER_SIZE + buffer->head - buffer->tail) % SERIAL_BUFFER_SIZE; +} + +int Serial_::peek(void) +{ + ring_buffer *buffer = &cdc_rx_buffer; + if (buffer->head == buffer->tail) { + return -1; + } else { + return buffer->buffer[buffer->tail]; + } +} + +int Serial_::read(void) +{ + ring_buffer *buffer = &cdc_rx_buffer; + // if the head isn't ahead of the tail, we don't have any characters + if (buffer->head == buffer->tail) { + return -1; + } else { + unsigned char c = buffer->buffer[buffer->tail]; + buffer->tail = (unsigned int)(buffer->tail + 1) % SERIAL_BUFFER_SIZE; + return c; + } +} + +void Serial_::flush(void) +{ + USB_Flush(CDC_TX); +} + +size_t Serial_::write(uint8_t c) +{ + /* only try to send bytes if the high-level CDC connection itself + is open (not just the pipe) - the OS should set lineState when the port + is opened and clear lineState when the port is closed. + bytes sent before the user opens the connection or after + the connection is closed are lost - just like with a UART. */ + + // TODO - ZE - check behavior on different OSes and test what happens if an + // open connection isn't broken cleanly (cable is yanked out, host dies + // or locks up, or host virtual serial port hangs) + if (_usbLineInfo.lineState > 0) { + int r = USB_Send(CDC_TX,&c,1); + if (r > 0) { + return r; + } else { + setWriteError(); + return 0; + } + } + setWriteError(); + return 0; +} + +// This operator is a convenient way for a sketch to check whether the +// port has actually been configured and opened by the host (as opposed +// to just being connected to the host). It can be used, for example, in +// setup() before printing to ensure that an application on the host is +// actually ready to receive and display the data. +// We add a short delay before returning to fix a bug observed by Federico +// where the port is configured (lineState != 0) but not quite opened. +Serial_::operator bool() { + bool result = false; + if (_usbLineInfo.lineState > 0) + result = true; + delay(10); + return result; +} + +Serial_ Serial; + +#endif +#endif /* if defined(USBCON) */ diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h new file mode 100644 index 0000000000..ea134838a2 --- /dev/null +++ b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h @@ -0,0 +1,26 @@ +#ifndef client_h +#define client_h +#include "Print.h" +#include "Stream.h" +#include "IPAddress.h" + +class Client : public Stream { + +public: + virtual int connect(IPAddress ip, uint16_t port) =0; + virtual int connect(const char *host, uint16_t port) =0; + virtual size_t write(uint8_t) =0; + virtual size_t write(const uint8_t *buf, size_t size) =0; + virtual int available() = 0; + virtual int read() = 0; + virtual int read(uint8_t *buf, size_t size) = 0; + virtual int peek() = 0; + virtual void flush() = 0; + virtual void stop() = 0; + virtual uint8_t connected() = 0; + virtual operator bool() = 0; +protected: + uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); }; +}; + +#endif diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp b/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp new file mode 100644 index 0000000000..ac63608449 --- /dev/null +++ b/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp @@ -0,0 +1,520 @@ + + +/* Copyright (c) 2011, Peter Barrett +** +** Permission to use, copy, modify, and/or distribute this software for +** any purpose with or without fee is hereby granted, provided that the +** above copyright notice and this permission notice appear in all copies. +** +** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL +** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR +** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES +** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +** SOFTWARE. +*/ + +#include "Platform.h" +#include "USBAPI.h" +#include "USBDesc.h" + +#if defined(USBCON) +#ifdef HID_ENABLED + +//#define RAWHID_ENABLED + +// Singletons for mouse and keyboard + +Mouse_ Mouse; +Keyboard_ Keyboard; + +//================================================================================ +//================================================================================ + +// HID report descriptor + +#define LSB(_x) ((_x) & 0xFF) +#define MSB(_x) ((_x) >> 8) + +#define RAWHID_USAGE_PAGE 0xFFC0 +#define RAWHID_USAGE 0x0C00 +#define RAWHID_TX_SIZE 64 +#define RAWHID_RX_SIZE 64 + +extern const u8 _hidReportDescriptor[] PROGMEM; +const u8 _hidReportDescriptor[] = { + + // Mouse + 0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 54 + 0x09, 0x02, // USAGE (Mouse) + 0xa1, 0x01, // COLLECTION (Application) + 0x09, 0x01, // USAGE (Pointer) + 0xa1, 0x00, // COLLECTION (Physical) + 0x85, 0x01, // REPORT_ID (1) + 0x05, 0x09, // USAGE_PAGE (Button) + 0x19, 0x01, // USAGE_MINIMUM (Button 1) + 0x29, 0x03, // USAGE_MAXIMUM (Button 3) + 0x15, 0x00, // LOGICAL_MINIMUM (0) + 0x25, 0x01, // LOGICAL_MAXIMUM (1) + 0x95, 0x03, // REPORT_COUNT (3) + 0x75, 0x01, // REPORT_SIZE (1) + 0x81, 0x02, // INPUT (Data,Var,Abs) + 0x95, 0x01, // REPORT_COUNT (1) + 0x75, 0x05, // REPORT_SIZE (5) + 0x81, 0x03, // INPUT (Cnst,Var,Abs) + 0x05, 0x01, // USAGE_PAGE (Generic Desktop) + 0x09, 0x30, // USAGE (X) + 0x09, 0x31, // USAGE (Y) + 0x09, 0x38, // USAGE (Wheel) + 0x15, 0x81, // LOGICAL_MINIMUM (-127) + 0x25, 0x7f, // LOGICAL_MAXIMUM (127) + 0x75, 0x08, // REPORT_SIZE (8) + 0x95, 0x03, // REPORT_COUNT (3) + 0x81, 0x06, // INPUT (Data,Var,Rel) + 0xc0, // END_COLLECTION + 0xc0, // END_COLLECTION + + // Keyboard + 0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 47 + 0x09, 0x06, // USAGE (Keyboard) + 0xa1, 0x01, // COLLECTION (Application) + 0x85, 0x02, // REPORT_ID (2) + 0x05, 0x07, // USAGE_PAGE (Keyboard) + + 0x19, 0xe0, // USAGE_MINIMUM (Keyboard LeftControl) + 0x29, 0xe7, // USAGE_MAXIMUM (Keyboard Right GUI) + 0x15, 0x00, // LOGICAL_MINIMUM (0) + 0x25, 0x01, // LOGICAL_MAXIMUM (1) + 0x75, 0x01, // REPORT_SIZE (1) + + 0x95, 0x08, // REPORT_COUNT (8) + 0x81, 0x02, // INPUT (Data,Var,Abs) + 0x95, 0x01, // REPORT_COUNT (1) + 0x75, 0x08, // REPORT_SIZE (8) + 0x81, 0x03, // INPUT (Cnst,Var,Abs) + + 0x95, 0x06, // REPORT_COUNT (6) + 0x75, 0x08, // REPORT_SIZE (8) + 0x15, 0x00, // LOGICAL_MINIMUM (0) + 0x25, 0x65, // LOGICAL_MAXIMUM (101) + 0x05, 0x07, // USAGE_PAGE (Keyboard) + + 0x19, 0x00, // USAGE_MINIMUM (Reserved (no event indicated)) + 0x29, 0x65, // USAGE_MAXIMUM (Keyboard Application) + 0x81, 0x00, // INPUT (Data,Ary,Abs) + 0xc0, // END_COLLECTION + +#if RAWHID_ENABLED + // RAW HID + 0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE), // 30 + 0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE), + + 0xA1, 0x01, // Collection 0x01 + 0x85, 0x03, // REPORT_ID (3) + 0x75, 0x08, // report size = 8 bits + 0x15, 0x00, // logical minimum = 0 + 0x26, 0xFF, 0x00, // logical maximum = 255 + + 0x95, 64, // report count TX + 0x09, 0x01, // usage + 0x81, 0x02, // Input (array) + + 0x95, 64, // report count RX + 0x09, 0x02, // usage + 0x91, 0x02, // Output (array) + 0xC0 // end collection +#endif +}; + +extern const HIDDescriptor _hidInterface PROGMEM; +const HIDDescriptor _hidInterface = +{ + D_INTERFACE(HID_INTERFACE,1,3,0,0), + D_HIDREPORT(sizeof(_hidReportDescriptor)), + D_ENDPOINT(USB_ENDPOINT_IN (HID_ENDPOINT_INT),USB_ENDPOINT_TYPE_INTERRUPT,0x40,0x01) +}; + +//================================================================================ +//================================================================================ +// Driver + +u8 _hid_protocol = 1; +u8 _hid_idle = 1; + +#define WEAK __attribute__ ((weak)) + +int WEAK HID_GetInterface(u8* interfaceNum) +{ + interfaceNum[0] += 1; // uses 1 + return USB_SendControl(TRANSFER_PGM,&_hidInterface,sizeof(_hidInterface)); +} + +int WEAK HID_GetDescriptor(int i) +{ + return USB_SendControl(TRANSFER_PGM,_hidReportDescriptor,sizeof(_hidReportDescriptor)); +} + +void WEAK HID_SendReport(u8 id, const void* data, int len) +{ + USB_Send(HID_TX, &id, 1); + USB_Send(HID_TX | TRANSFER_RELEASE,data,len); +} + +bool WEAK HID_Setup(Setup& setup) +{ + u8 r = setup.bRequest; + u8 requestType = setup.bmRequestType; + if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) + { + if (HID_GET_REPORT == r) + { + //HID_GetReport(); + return true; + } + if (HID_GET_PROTOCOL == r) + { + //Send8(_hid_protocol); // TODO + return true; + } + } + + if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) + { + if (HID_SET_PROTOCOL == r) + { + |