diff options
Diffstat (limited to 'platforms')
20 files changed, 949 insertions, 120 deletions
diff --git a/platforms/chibios/boards/BONSAI_C4/configs/mcuconf.h b/platforms/chibios/boards/BONSAI_C4/configs/mcuconf.h index 2f9e627c7e..b381aed4fd 100644 --- a/platforms/chibios/boards/BONSAI_C4/configs/mcuconf.h +++ b/platforms/chibios/boards/BONSAI_C4/configs/mcuconf.h @@ -1,9 +1,12 @@ /* ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. @@ -246,4 +249,4 @@ */ #define STM32_WDG_USE_IWDG FALSE -#endif /* MCUCONF_H */
\ No newline at end of file +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h index 7fe9b654e1..9209e99e76 100644 --- a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h +++ b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h @@ -8,7 +8,7 @@ *========================**/ #if !defined(I2C_DRIVER) -# define I2C_DRIVER I2CD2 +# define I2C_DRIVER I2CD1 #endif #if !defined(I2C1_SDA_PIN) diff --git a/platforms/chibios/boards/PJRC_TEENSY_3_5/board/board.mk b/platforms/chibios/boards/PJRC_TEENSY_3_5/board/board.mk new file mode 100644 index 0000000000..e129836b08 --- /dev/null +++ b/platforms/chibios/boards/PJRC_TEENSY_3_5/board/board.mk @@ -0,0 +1,11 @@ +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_5/board.mk + +# List of all the board related files. +BOARDSRC += $(BOARD_PATH)/board/extra.c + +# Required include directories +BOARDINC += $(BOARD_PATH)/board + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/boards/PJRC_TEENSY_3_5/board/extra.c b/platforms/chibios/boards/PJRC_TEENSY_3_5/board/extra.c new file mode 100644 index 0000000000..4940d6d99b --- /dev/null +++ b/platforms/chibios/boards/PJRC_TEENSY_3_5/board/extra.c @@ -0,0 +1,7 @@ +#include <hal.h> + +void restart_usb_driver(USBDriver *usbp) { + // Do nothing. Restarting the USB driver on the Teensy 3.6 breaks it, + // resulting in a keyboard which can wake up a PC from Suspend-to-RAM, but + // does not actually produce any keypresses until you un-plug and re-plug. +} diff --git a/platforms/chibios/boards/PJRC_TEENSY_3_6/board/board.mk b/platforms/chibios/boards/PJRC_TEENSY_3_6/board/board.mk new file mode 100644 index 0000000000..aba195db04 --- /dev/null +++ b/platforms/chibios/boards/PJRC_TEENSY_3_6/board/board.mk @@ -0,0 +1,11 @@ +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_6/board.mk + +# List of all the board related files. +BOARDSRC += $(BOARD_PATH)/board/extra.c + +# Required include directories +BOARDINC += $(BOARD_PATH)/board + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/boards/PJRC_TEENSY_3_6/board/extra.c b/platforms/chibios/boards/PJRC_TEENSY_3_6/board/extra.c new file mode 100644 index 0000000000..4940d6d99b --- /dev/null +++ b/platforms/chibios/boards/PJRC_TEENSY_3_6/board/extra.c @@ -0,0 +1,7 @@ +#include <hal.h> + +void restart_usb_driver(USBDriver *usbp) { + // Do nothing. Restarting the USB driver on the Teensy 3.6 breaks it, + // resulting in a keyboard which can wake up a PC from Suspend-to-RAM, but + // does not actually produce any keypresses until you un-plug and re-plug. +} diff --git a/platforms/chibios/boards/QMK_PM2040/configs/config.h b/platforms/chibios/boards/QMK_PM2040/configs/config.h index 8c773f8b19..ec85ae0cf4 100644 --- a/platforms/chibios/boards/QMK_PM2040/configs/config.h +++ b/platforms/chibios/boards/QMK_PM2040/configs/config.h @@ -4,7 +4,7 @@ #pragma once #ifndef I2C_DRIVER -# define I2C_DRIVER I2CD2 +# define I2C_DRIVER I2CD1 #endif #ifndef I2C1_SDA_PIN # define I2C1_SDA_PIN D1 diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h index 8367328a04..4a22e818e2 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_8_0_ +#define _CHIBIOS_HAL_CONF_VER_8_4_ #include <mcuconf.h> @@ -335,15 +335,18 @@ /*===========================================================================*/ /** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. + * @brief Timeout before assuming a failure while waiting for card idle. + * @note Time is in milliseconds. + */ +#if !defined(MMC_IDLE_TIMEOUT_MS) || defined(__DOXYGEN__) +#define MMC_IDLE_TIMEOUT_MS 1000 +#endif + +/** + * @brief Mutual exclusion on the SPI bus. */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE +#if !defined(MMC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define MMC_USE_MUTUAL_EXCLUSION TRUE #endif /*===========================================================================*/ diff --git a/platforms/chibios/boards/common/configs/halconf.h b/platforms/chibios/boards/common/configs/halconf.h index 1805a77438..b0ccbc1f2f 100644 --- a/platforms/chibios/boards/common/configs/halconf.h +++ b/platforms/chibios/boards/common/configs/halconf.h @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_8_0_ +#define _CHIBIOS_HAL_CONF_VER_8_4_ #include <mcuconf.h> @@ -335,15 +335,18 @@ /*===========================================================================*/ /** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. + * @brief Timeout before assuming a failure while waiting for card idle. + * @note Time is in milliseconds. + */ +#if !defined(MMC_IDLE_TIMEOUT_MS) || defined(__DOXYGEN__) +#define MMC_IDLE_TIMEOUT_MS 1000 +#endif + +/** + * @brief Mutual exclusion on the SPI bus. */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE +#if !defined(MMC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define MMC_USE_MUTUAL_EXCLUSION TRUE #endif /*===========================================================================*/ diff --git a/platforms/chibios/boards/common/ld/STM32F103xB_uf2boot.ld b/platforms/chibios/boards/common/ld/STM32F103xB_uf2boot.ld new file mode 100644 index 0000000000..98d0f3ea75 --- /dev/null +++ b/platforms/chibios/boards/common/ld/STM32F103xB_uf2boot.ld @@ -0,0 +1,88 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * ST32F103xB memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000 + 16K, len = 128k - 16K + flash1 (rx) : org = 0x00000000, len = 0 + flash2 (rx) : org = 0x00000000, len = 0 + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 20k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* Bootloader reset support */ +_board_magic_reg = ORIGIN(ram0) + 16k; /* this is based off the code within backup.c */ diff --git a/platforms/chibios/boards/keyboard-config-templates/board.h b/platforms/chibios/boards/keyboard-config-templates/board.h deleted file mode 100644 index 5b840c389c..0000000000 --- a/platforms/chibios/boards/keyboard-config-templates/board.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2020 Nick Brassel (tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ -#pragma once - -#include_next <board.h> - -// #undef STM32_HSE_BYPASS diff --git a/platforms/chibios/boards/keyboard-config-templates/chconf.h b/platforms/chibios/boards/keyboard-config-templates/chconf.h deleted file mode 100644 index fca444747c..0000000000 --- a/platforms/chibios/boards/keyboard-config-templates/chconf.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2020 Nick Brassel (tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ -#pragma once - -// #define CH_CFG_OPTIMIZE_SPEED TRUE - -#include_next <chconf.h> diff --git a/platforms/chibios/boards/keyboard-config-templates/halconf.h b/platforms/chibios/boards/keyboard-config-templates/halconf.h deleted file mode 100644 index 456020f16a..0000000000 --- a/platforms/chibios/boards/keyboard-config-templates/halconf.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2020 Nick Brassel (tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ -#pragma once - -// #define HAL_USE_DAC TRUE - -#include_next <halconf.h> diff --git a/platforms/chibios/boards/keyboard-config-templates/mcuconf.h b/platforms/chibios/boards/keyboard-config-templates/mcuconf.h deleted file mode 100644 index c690b02f4b..0000000000 --- a/platforms/chibios/boards/keyboard-config-templates/mcuconf.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2020 Nick Brassel (tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <https://www.gnu.org/licenses/>. - */ -#pragma once - -#include_next <mcuconf.h> - -// #undef STM32_HSE_ENABLED -// #define STM32_HSE_ENABLED FALSE diff --git a/platforms/chibios/bootloader.mk b/platforms/chibios/bootloader.mk index 0568d35321..85f1866062 100644 --- a/platforms/chibios/bootloader.mk +++ b/platforms/chibios/bootloader.mk @@ -104,6 +104,11 @@ ifeq ($(strip $(BOOTLOADER)), tinyuf2) BOOTLOADER_TYPE = tinyuf2 FIRMWARE_FORMAT = uf2 endif +ifeq ($(strip $(BOOTLOADER)), uf2boot) + OPT_DEFS += -DBOOTLOADER_UF2BOOT + BOOTLOADER_TYPE = uf2boot + FIRMWARE_FORMAT = uf2 +endif ifeq ($(strip $(BOOTLOADER)), rp2040) OPT_DEFS += -DBOOTLOADER_RP2040 BOOTLOADER_TYPE = rp2040 diff --git a/platforms/chibios/bootloaders/uf2boot.c b/platforms/chibios/bootloaders/uf2boot.c new file mode 100644 index 0000000000..f5b1a64334 --- /dev/null +++ b/platforms/chibios/bootloaders/uf2boot.c @@ -0,0 +1,23 @@ +// Copyright 2023 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "bootloader.h" + +// From mmoskal/uf2-stm32f103's backup.c +#define MAGIC_BOOT 0x544F4F42UL + +// defined by linker script +extern uint32_t _board_magic_reg[]; +#define MAGIC_REG _board_magic_reg[0] + +void bootloader_jump(void) { + MAGIC_REG = MAGIC_BOOT; + NVIC_SystemReset(); +} + +void mcu_reset(void) { + NVIC_SystemReset(); +} + +/* not needed, no two-stage reset */ +void enter_bootloader_mode_if_requested(void) {} diff --git a/platforms/chibios/drivers/serial_usart.c b/platforms/chibios/drivers/serial_usart.c index 6581a5b6e9..6ebbf7c8ca 100644 --- a/platforms/chibios/drivers/serial_usart.c +++ b/platforms/chibios/drivers/serial_usart.c @@ -72,27 +72,17 @@ inline void serial_transport_driver_clear(void) { #elif HAL_USE_SIO -void clear_rx_evt_cb(SIODriver* siop) { - osalSysLockFromISR(); - /* If errors occured during transactions this callback is invoked. We just - * clear the error sources and move on. We rely on the fact that we check - * for the success of the transaction by comparing the received/send bytes - * with the actual received/send bytes in the send/receive functions. */ - sioGetAndClearEventsI(serial_driver); - osalSysUnlockFromISR(); -} - -static const SIOOperation serial_usart_operation = {.rx_cb = NULL, .rx_idle_cb = NULL, .tx_cb = NULL, .tx_end_cb = NULL, .rx_evt_cb = &clear_rx_evt_cb}; - /** * @brief SIO Driver startup routine. */ static inline void usart_driver_start(void) { sioStart(serial_driver, &serial_config); - sioStartOperation(serial_driver, &serial_usart_operation); } inline void serial_transport_driver_clear(void) { + if (sioHasRXErrorsX(serial_driver)) { + sioGetAndClearErrors(serial_driver); + } osalSysLock(); while (!sioIsRXEmptyX(serial_driver)) { (void)sioGetX(serial_driver); @@ -132,10 +122,10 @@ inline bool serial_transport_send(const uint8_t* source, const size_t size) { return serial_transport_receive(dump, bytes_left); # else /* The SIO driver directly accesses the hardware FIFOs of the USART - * peripheral. As these are limited in depth, the RX FIFO might have been - * overflowed by a large that we just send. Therefore we attempt to read - * back all the data we send or until the FIFO runs empty in case it - * overflowed and data was truncated. */ + * peripheral. As these are limited in depth, the RX FIFO might have + * been overflowed by a large transaction that we just send. Therefore + * we attempt to read back all the data we send or until the FIFO runs + * empty in case it overflowed and data was truncated. */ if (unlikely(sioSynchronizeTXEnd(serial_driver, TIME_MS2I(SERIAL_USART_TIMEOUT)) < MSG_OK)) { return false; } diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk index 6e23d96e1c..ac842e8d62 100644 --- a/platforms/chibios/flash.mk +++ b/platforms/chibios/flash.mk @@ -109,6 +109,8 @@ else ifeq ($(strip $(BOOTLOADER)),kiibohd) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL) else ifeq ($(strip $(BOOTLOADER)),tinyuf2) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY) +else ifeq ($(strip $(BOOTLOADER)),uf2boot) + $(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY) else ifeq ($(strip $(BOOTLOADER)),rp2040) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY) else ifeq ($(strip $(MCU_FAMILY)),KINETIS) diff --git a/platforms/lv_conf.h b/platforms/lv_conf.h new file mode 100644 index 0000000000..d02d87bfc7 --- /dev/null +++ b/platforms/lv_conf.h @@ -0,0 +1,756 @@ +/** + * @file lv_conf.h + * Configuration file for v8.2.0 + */ + +/* + * Copy this file as `lv_conf.h` + * 1. simply next to the `lvgl` folder + * 2. or any other places and + * - define `LV_CONF_INCLUDE_SIMPLE` + * - add the path as include path + */ + +/* clang-format off */ +#if 1 /*Set it to "1" to enable content*/ + +#ifndef LV_CONF_H +#define LV_CONF_H + +#include <stdint.h> + +/*==================== + COLOR SETTINGS + *====================*/ + +/*Color depth: 1 (1 byte per pixel), 8 (RGB332), 16 (RGB565), 32 (ARGB8888)*/ +#define LV_COLOR_DEPTH 16 + +/*Swap the 2 bytes of RGB565 color. Useful if the display has an 8-bit interface (e.g. SPI)*/ +#define LV_COLOR_16_SWAP 1 + +/*Enable more complex drawing routines to manage screens transparency. + *Can be used if the UI is above another layer, e.g. an OSD menu or video player. + *Requires `LV_COLOR_DEPTH = 32` colors and the screen's `bg_opa` should be set to non LV_OPA_COVER value*/ +#define LV_COLOR_SCREEN_TRANSP 0 + +/* Adjust color mix functions rounding. GPUs might calculate color mix (blending) differently. + * 0: round down, 64: round up from x.75, 128: round up from half, 192: round up from x.25, 254: round up */ +#define LV_COLOR_MIX_ROUND_OFS (LV_COLOR_DEPTH == 32 ? 0: 128) + +/*Images pixels with this color will not be drawn if they are chroma keyed)*/ +#define LV_COLOR_CHROMA_KEY lv_color_hex(0x00ff00) /*pure green*/ + +/*========================= + MEMORY SETTINGS + *=========================*/ + +/*1: use custom malloc/free, 0: use the built-in `lv_mem_alloc()` and `lv_mem_free()`*/ +#ifndef LV_MEM_CUSTOM +#define LV_MEM_CUSTOM 1 +#endif // LV_MEM_CUSTOM +#if LV_MEM_CUSTOM == 0 + /*Size of the memory available for `lv_mem_alloc()` in bytes (>= 2kB)*/ + #define LV_MEM_SIZE (48U * 1024U) /*[bytes]*/ + + /*Set an address for the memory pool instead of allocating it as a normal array. Can be in external SRAM too.*/ + #define LV_MEM_ADR 0 /*0: unused*/ + /*Instead of an address give a memory allocator that will be called to get a memory pool for LVGL. E.g. my_malloc*/ + #if LV_MEM_ADR == 0 + //#define LV_MEM_POOL_INCLUDE your_alloc_library /* Uncomment if using an external allocator*/ + //#define LV_MEM_POOL_ALLOC your_alloc /* Uncomment if using an external allocator*/ + #endif + +#else /*LV_MEM_CUSTOM*/ + #define LV_MEM_CUSTOM_INCLUDE <stdlib.h> /*Header for the dynamic memory function*/ + #define LV_MEM_CUSTOM_ALLOC malloc + #define LV_MEM_CUSTOM_FREE free + #define LV_MEM_CUSTOM_REALLOC realloc +#endif /*LV_MEM_CUSTOM*/ + +/*Number of the intermediate memory buffer used during rendering and other internal processing mechanisms. + *You will see an error log message if there wasn't enough buffers. */ +#define LV_MEM_BUF_MAX_NUM 16 + +/*Use the standard `memcpy` and `memset` instead of LVGL's own functions. (Might or might not be faster).*/ +#define LV_MEMCPY_MEMSET_STD 0 + +/*==================== + HAL SETTINGS + *====================*/ + +/*Default display refresh period. LVG will redraw changed areas with this period time*/ +#define LV_DISP_DEF_REFR_PERIOD 30 /*[ms]*/ + +/*Input device read period in milliseconds*/ +#define LV_INDEV_DEF_READ_PERIOD 30 /*[ms]*/ + +/*Use a custom tick source that tells the elapsed time in milliseconds. + *It removes the need to manually update the tick with `lv_tick_inc()`)*/ +#ifndef LV_TICK_CUSTOM +#define LV_TICK_CUSTOM 0 +#endif // LV_TICK_CUSTOM +#if LV_TICK_CUSTOM + #define LV_TICK_CUSTOM_INCLUDE "Arduino.h" /*Header for the system time function*/ + #define LV_TICK_CUSTOM_SYS_TIME_EXPR (millis()) /*Expression evaluating to current system time in ms*/ +#endif /*LV_TICK_CUSTOM*/ + +/*Default Dot Per Inch. Used to initialize default sizes such as widgets sized, style paddings. + *(Not so important, you can adjust it to modify default sizes and spaces)*/ +#define LV_DPI_DEF 130 /*[px/inch]*/ + +/*======================= + * FEATURE CONFIGURATION + *=======================*/ + +/*------------- + * Drawing + *-----------*/ + +/*Enable complex draw engine. + *Required to draw shadow, gradient, rounded corners, circles, arc, skew lines, image transformations or any masks*/ +#ifndef LV_DRAW_COMPLEX +#define LV_DRAW_COMPLEX 1 +#endif // LV_DRAW_COMPLEX +#if LV_DRAW_COMPLEX != 0 + + /*Allow buffering some shadow calculation. + *LV_SHADOW_CACHE_SIZE is the max. shadow size to buffer, where shadow size is `shadow_width + radius` + *Caching has LV_SHADOW_CACHE_SIZE^2 RAM cost*/ + #define LV_SHADOW_CACHE_SIZE 0 + + /* Set number of maximally cached circle data. + * The circumference of 1/4 circle are saved for anti-aliasing + * radius * 4 bytes are used per circle (the most often used radiuses are saved) + * 0: to disable caching */ + #define LV_CIRCLE_CACHE_SIZE 4 +#endif /*LV_DRAW_COMPLEX*/ + +/*Default image cache size. Image caching keeps the images opened. + *If only the built-in image formats are used there is no real advantage of caching. (I.e. if no new image decoder is added) + *With complex image decoders (e.g. PNG or JPG) caching can save the continuous open/decode of images. + *However the opened images might consume additional RAM. + *0: to disable caching*/ +#define LV_IMG_CACHE_DEF_SIZE 0 + +/*Number of stops allowed per gradient. Increase this to allow more stops. + *This adds (sizeof(lv_color_t) + 1) bytes per additional stop*/ +#define LV_GRADIENT_MAX_STOPS 2 + +/*Default gradient buffer size. + *When LVGL calculates the gradient "maps" it can save them into a cache to avoid calculating them again. + *LV_GRAD_CACHE_DEF_SIZE sets the size of this cache in bytes. + *If the cache is too small the map will be allocated only while it's required for the drawing. + *0 mean no caching.*/ +#define LV_GRAD_CACHE_DEF_SIZE 0 + +/*Allow dithering the gradients (to achieve visual smooth color gradients on limited color depth display) + *LV_DITHER_GRADIENT implies allocating one or two more lines of the object's rendering surface + *The increase in memory consumption is (32 bits * object width) plus 24 bits * object width if using error diffusion */ +#ifndef LV_DITHER_GRADIENT +#define LV_DITHER_GRADIENT 0 +#endif +#if LV_DITHER_GRADIENT + /*Add support for error diffusion dithering. + *Error diffusion dithering gets a much better visual result, but implies more CPU consumption and memory when drawing. + *The increase in memory consumption is (24 bits * object's width)*/ + #define LV_DITHER_ERROR_DIFFUSION 0 +#endif + +/*Maximum buffer size to allocate for rotation. + *Only used if software rotation is enabled in the display driver.*/ +#define LV_DISP_ROT_MAX_BUF (10*1024) + +/*------------- + * GPU + *-----------*/ + +/*Use STM32's DMA2D (aka Chrom Art) GPU*/ +#ifndef LV_USE_GPU_STM32_DMA2D +#define LV_USE_GPU_STM32_DMA2D 0 +#endif // LV_USE_GPU_STM32_DMA2D +#if LV_USE_GPU_STM32_DMA2D + /*Must be defined to include path of CMSIS header of target processor + e.g. "stm32f769xx.h" or "stm32f429xx.h"*/ + #define LV_GPU_DMA2D_CMSIS_INCLUDE +#endif + +/*Use NXP's PXP GPU iMX RTxxx platforms*/ +#ifndef LV_USE_GPU_NXP_PXP +#define LV_USE_GPU_NXP_PXP 0 +#endif // LV_USE_GPU_NXP_PXP +#if LV_USE_GPU_NXP_PXP + /*1: Add default bare metal and FreeRTOS interrupt handling routines for PXP (lv_gpu_nxp_pxp_osa.c) + * and call lv_gpu_nxp_pxp_init() automatically during lv_init(). Note that symbol SDK_OS_FREE_RTOS + * has to be defined in order to use FreeRTOS OSA, otherwise bare-metal implementation is selected. + *0: lv_gpu_nxp_pxp_init() has to be called manually before lv_init() + */ + #define LV_USE_GPU_NXP_PXP_AUTO_INIT 0 +#endif + +/*Use NXP's VG-Lite GPU iMX RTxxx platforms*/ +#define LV_USE_GPU_NXP_VG_LITE 0 + +/*Use SDL renderer API*/ +#ifndef LV_USE_GPU_SDL +#define LV_USE_GPU_SDL 0 +#endif // LV_USE_GPU_SDL +#if LV_USE_GPU_SDL + #define LV_GPU_SDL_INCLUDE_PATH <SDL2/SDL.h> + /*Texture cache size, 8MB by default*/ + #define LV_GPU_SDL_LRU_SIZE (1024 * 1024 * 8) + /*Custom blend mode for mask drawing, disable if you need to link with older SDL2 lib*/ + #define LV_GPU_SDL_CUSTOM_BLEND_MODE (SDL_VERSION_ATLEAST(2, 0, 6)) +#endif + +/*------------- + * Logging + *-----------*/ + +/*Enable the log module*/ +#ifndef LV_USE_LOG +#define LV_USE_LOG 0 +#endif // LV_USE_LOG +#if LV_USE_LOG + + /*How important log should be added: + *LV_LOG_LEVEL_TRACE A lot of logs to give detailed information + *LV_LOG_LEVEL_INFO Log important events + *LV_LOG_LEVEL_WARN Log if something unwanted happened but didn't cause a problem + *LV_LOG_LEVEL_ERROR Only critical issue, when the system may fail + *LV_LOG_LEVEL_USER Only logs added by the user + *LV_LOG_LEVEL_NONE Do not log anything*/ + #define LV_LOG_LEVEL LV_LOG_LEVEL_WARN + + /*1: Print the log with 'printf'; + *0: User need to register a callback with `lv_log_register_print_cb()`*/ + #define LV_LOG_PRINTF 0 + + /*Enable/disable LV_LOG_TRACE in modules that produces a huge number of logs*/ + #define LV_LOG_TRACE_MEM 1 + #define LV_LOG_TRACE_TIMER 1 + #define LV_LOG_TRACE_INDEV 1 + #define LV_LOG_TRACE_DISP_REFR 1 + #define LV_LOG_TRACE_EVENT 1 + #define LV_LOG_TRACE_OBJ_CREATE 1 + #define LV_LOG_TRACE_LAYOUT 1 + #define LV_LOG_TRACE_ANIM 1 + +#endif /*LV_USE_LOG*/ + +/*------------- + * Asserts + *-----------*/ + +/*Enable asserts if an operation is failed or an invalid data is found. + *If LV_USE_LOG is enabled an error message will be printed on failure*/ +#define LV_USE_ASSERT_NULL 1 /*Check if the parameter is NULL. (Very fast, recommended)*/ +#define LV_USE_ASSERT_MALLOC 1 /*Checks is the memory is successfully allocated or no. (Very fast, recommended)*/ +#define LV_USE_ASSERT_STYLE 0 /*Check if the styles are properly initialized. (Very fast, recommended)*/ +#define LV_USE_ASSERT_MEM_INTEGRITY 0 /*Check the integrity of `lv_mem` after critical operations. (Slow)*/ +#define LV_USE_ASSERT_OBJ 0 /*Check the object's type and existence (e.g. not deleted). (Slow)*/ + +/*Add a custom handler when assert happens e.g. to restart the MCU*/ +#define LV_ASSERT_HANDLER_INCLUDE <stdint.h> +#define LV_ASSERT_HANDLER while(1); /*Halt by default*/ + +/*------------- + * Others + *-----------*/ + +/*1: Show CPU usage and FPS count*/ +#ifndef LV_USE_PERF_MONITOR +#define LV_USE_PERF_MONITOR 0 +#endif // LV_USE_PERF_MONITOR +#if LV_USE_PERF_MONITOR + #define LV_USE_PERF_MONITOR_POS LV_ALIGN_BOTTOM_RIGHT +#endif + +/*1: Show the used memory and the memory fragmentation + * Requires LV_MEM_CUSTOM = 0*/ +#ifndef LV_USE_MEM_MONITOR +#define LV_USE_MEM_MONITOR 0 +#endif // LV_USE_MEM_MONITOR +#if LV_USE_MEM_MONITOR + #define LV_USE_MEM_MONITOR_POS LV_ALIGN_BOTTOM_LEFT +#endif + +/*1: Draw random colored rectangles over the redrawn areas*/ +#define LV_USE_REFR_DEBUG 0 + +/*Change the built in (v)snprintf functions*/ +#ifndef LV_SPRINTF_CUSTOM +#define LV_SPRINTF_CUSTOM 1 +#endif // LV_SPRINTF_CUSTOM +#if LV_SPRINTF_CUSTOM + #define LV_SPRINTF_INCLUDE <stdio.h> + #define lv_snprintf snprintf + #define lv_vsnprintf vsnprintf +#else /*LV_SPRINTF_ |