summaryrefslogtreecommitdiffstats
path: root/platforms
diff options
context:
space:
mode:
Diffstat (limited to 'platforms')
-rw-r--r--platforms/arm_atsam/_pin_defs.h (renamed from platforms/arm_atsam/pin_defs.h)0
-rw-r--r--platforms/arm_atsam/hardware_id.c9
-rw-r--r--platforms/avr/_pin_defs.h (renamed from platforms/avr/pin_defs.h)0
-rw-r--r--platforms/avr/drivers/hd44780.c542
-rw-r--r--platforms/avr/drivers/hd44780.h348
-rw-r--r--platforms/avr/hardware_id.c19
-rw-r--r--platforms/avr/platform.mk9
-rw-r--r--platforms/chibios/_pin_defs.h289
-rw-r--r--platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h57
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h3
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F401XC/board/board.mk9
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F401XC/configs/board.h77
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F401XC/configs/config.h22
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F401XC/configs/mcuconf.h244
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h75
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h75
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F411XE/board/board.mk9
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F411XE/configs/board.h20
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F411XE/configs/config.h22
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F411XE/configs/mcuconf.h252
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h20
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h22
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h5
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h2
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h60
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h3
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h14
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h2
-rw-r--r--platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h69
-rw-r--r--platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h31
-rw-r--r--platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h3
-rw-r--r--platforms/chibios/boards/common/configs/chconf.h69
-rw-r--r--platforms/chibios/boards/common/configs/halconf.h31
-rw-r--r--platforms/chibios/boards/common/ld/STM32F401xC_tinyuf2.ld (renamed from platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xC_tinyuf2.ld)0
-rw-r--r--platforms/chibios/boards/common/ld/STM32F401xE_tinyuf2.ld (renamed from platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xE_tinyuf2.ld)0
-rw-r--r--platforms/chibios/boards/common/ld/STM32F411xC_tinyuf2.ld (renamed from platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld)0
-rw-r--r--platforms/chibios/boards/common/ld/STM32F411xE_tinyuf2.ld (renamed from platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld)0
-rw-r--r--platforms/chibios/bootloaders/wb32_dfu.c49
-rw-r--r--platforms/chibios/converters/promicro_to_proton_c/_pin_defs.h41
-rw-r--r--platforms/chibios/converters/promicro_to_proton_c/converter.mk (renamed from platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk)2
-rw-r--r--platforms/chibios/drivers/serial.c29
-rw-r--r--platforms/chibios/drivers/serial_usart.c10
-rw-r--r--platforms/chibios/drivers/ws2812_spi.c28
-rw-r--r--platforms/chibios/eeprom_stm32_defs.h4
-rw-r--r--platforms/chibios/flash.mk14
-rw-r--r--platforms/chibios/gpio.h9
-rw-r--r--platforms/chibios/hardware_id.c15
-rw-r--r--platforms/chibios/pin_defs.h323
-rw-r--r--platforms/chibios/platform.mk16
-rw-r--r--platforms/chibios/synchronization_util.c26
-rw-r--r--platforms/chibios/timer.c2
-rw-r--r--platforms/chibios/wait.c2
-rw-r--r--platforms/common.mk1
-rw-r--r--platforms/hardware_id.h18
-rw-r--r--platforms/pin_defs.h4
-rw-r--r--platforms/synchronization_util.h14
-rw-r--r--platforms/test/hardware_id.c9
57 files changed, 1619 insertions, 1409 deletions
diff --git a/platforms/arm_atsam/pin_defs.h b/platforms/arm_atsam/_pin_defs.h
index 5b50b23910..5b50b23910 100644
--- a/platforms/arm_atsam/pin_defs.h
+++ b/platforms/arm_atsam/_pin_defs.h
diff --git a/platforms/arm_atsam/hardware_id.c b/platforms/arm_atsam/hardware_id.c
new file mode 100644
index 0000000000..8b3b35a492
--- /dev/null
+++ b/platforms/arm_atsam/hardware_id.c
@@ -0,0 +1,9 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "hardware_id.h"
+
+hardware_id_t get_hardware_id(void) {
+ hardware_id_t id = {0};
+ return id;
+}
diff --git a/platforms/avr/pin_defs.h b/platforms/avr/_pin_defs.h
index 3889704a87..3889704a87 100644
--- a/platforms/avr/pin_defs.h
+++ b/platforms/avr/_pin_defs.h
diff --git a/platforms/avr/drivers/hd44780.c b/platforms/avr/drivers/hd44780.c
deleted file mode 100644
index f15d7d0da8..0000000000
--- a/platforms/avr/drivers/hd44780.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/****************************************************************************
- Title: HD44780U LCD library
- Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury
- License: GNU General Public License Version 3
- File: $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $
- Software: AVR-GCC 3.3
- Target: any AVR device, memory mapped mode only for AT90S4414/8515/Mega
-
- DESCRIPTION
- Basic routines for interfacing a HD44780U-based text lcd display
-
- Originally based on Volker Oth's lcd library,
- changed lcd_init(), added additional constants for lcd_command(),
- added 4-bit I/O mode, improved and optimized code.
-
- Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in
- 4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported.
-
- Memory mapped mode compatible with Kanda STK200, but supports also
- generation of R/W signal through A8 address line.
-
- USAGE
- See the C include lcd.h file for a description of each function
-
-*****************************************************************************/
-#include <inttypes.h>
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <util/delay.h>
-#include "hd44780.h"
-
-/*
-** constants/macros
-*/
-#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */
-#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
-/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */
-# define PIN(x) (&PORTF == &(x) ? _SFR_IO8(0x00) : (*(&x - 2)))
-#else
-# define PIN(x) (*(&x - 2)) /* address of input register of port x */
-#endif
-
-#if LCD_IO_MODE
-# define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE)
-# define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN);
-# define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN);
-# define lcd_e_toggle() toggle_e()
-# define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN)
-# define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN)
-# define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN)
-# define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN)
-#endif
-
-#if LCD_IO_MODE
-# if LCD_LINES == 1
-# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE
-# else
-# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES
-# endif
-#else
-# if LCD_LINES == 1
-# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE
-# else
-# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES
-# endif
-#endif
-
-#if LCD_CONTROLLER_KS0073
-# if LCD_LINES == 4
-
-# define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C /* |0|010|1100 4-bit mode, extension-bit RE = 1 */
-# define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */
-# define KS0073_4LINES_MODE 0x09 /* |0|000|1001 4 lines mode */
-
-# endif
-#endif
-
-/*
-** function prototypes
-*/
-#if LCD_IO_MODE
-static void toggle_e(void);
-#endif
-
-/*
-** local functions
-*/
-
-/*************************************************************************
-delay for a minimum of <us> microseconds
-the number of loops is calculated at compile-time from MCU clock frequency
-*************************************************************************/
-#define delay(us) _delay_us(us)
-
-#if LCD_IO_MODE
-/* toggle Enable Pin to initiate write */
-static void toggle_e(void) {
- lcd_e_high();
- lcd_e_delay();
- lcd_e_low();
-}
-#endif
-
-/*************************************************************************
-Low-level function to write byte to LCD controller
-Input: data byte to write to LCD
- rs 1: write data
- 0: write instruction
-Returns: none
-*************************************************************************/
-#if LCD_IO_MODE
-static void lcd_write(uint8_t data, uint8_t rs) {
- unsigned char dataBits;
-
- if (rs) { /* write data (RS=1, RW=0) */
- lcd_rs_high();
- } else { /* write instruction (RS=0, RW=0) */
- lcd_rs_low();
- }
- lcd_rw_low(); /* RW=0 write mode */
-
- if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
- /* configure data pins as output */
- DDR(LCD_DATA0_PORT) |= 0x0F;
-
- /* output high nibble first */
- dataBits = LCD_DATA0_PORT & 0xF0;
- LCD_DATA0_PORT = dataBits | ((data >> 4) & 0x0F);
- lcd_e_toggle();
-
- /* output low nibble */
- LCD_DATA0_PORT = dataBits | (data & 0x0F);
- lcd_e_toggle();
-
- /* all data pins high (inactive) */
- LCD_DATA0_PORT = dataBits | 0x0F;
- } else {
- /* configure data pins as output */
- DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
- DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
- DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
- DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
-
- /* output high nibble first */
- LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
- LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
- LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
- LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
- if (data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
- if (data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
- if (data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
- if (data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
- lcd_e_toggle();
-
- /* output low nibble */
- LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
- LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
- LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
- LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
- if (data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
- if (data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
- if (data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
- if (data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
- lcd_e_toggle();
-
- /* all data pins high (inactive) */
- LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
- LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
- LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
- LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
- }
-}
-#else
-# define lcd_write(d, rs) \
- if (rs) \
- *(volatile uint8_t *)(LCD_IO_DATA) = d; \
- else \
- *(volatile uint8_t *)(LCD_IO_FUNCTION) = d;
-/* rs==0 -> write instruction to LCD_IO_FUNCTION */
-/* rs==1 -> write data to LCD_IO_DATA */
-#endif
-
-/*************************************************************************
-Low-level function to read byte from LCD controller
-Input: rs 1: read data
- 0: read busy flag / address counter
-Returns: byte read from LCD controller
-*************************************************************************/
-#if LCD_IO_MODE
-static uint8_t lcd_read(uint8_t rs) {
- uint8_t data;
-
- if (rs)
- lcd_rs_high(); /* RS=1: read data */
- else
- lcd_rs_low(); /* RS=0: read busy flag */
- lcd_rw_high(); /* RW=1 read mode */
-
- if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
- DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */
-
- lcd_e_high();
- lcd_e_delay();
- data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */
- lcd_e_low();
-
- lcd_e_delay(); /* Enable 500ns low */
-
- lcd_e_high();
- lcd_e_delay();
- data |= PIN(LCD_DATA0_PORT) & 0x0F; /* read low nibble */
- lcd_e_low();
- } else {
- /* configure data pins as input */
- DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN);
- DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN);
- DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN);
- DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN);
-
- /* read high nibble first */
- lcd_e_high();
- lcd_e_delay();
- data = 0;
- if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x10;
- if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x20;
- if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x40;
- if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x80;
- lcd_e_low();
-
- lcd_e_delay(); /* Enable 500ns low */
-
- /* read low nibble */
- lcd_e_high();
- lcd_e_delay();
- if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x01;
- if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x02;
- if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x04;
- if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x08;
- lcd_e_low();
- }
- return data;
-}
-#else
-# define lcd_read(rs) (rs) ? *(volatile uint8_t *)(LCD_IO_DATA + LCD_IO_READ) : *(volatile uint8_t *)(LCD_IO_FUNCTION + LCD_IO_READ)
-/* rs==0 -> read instruction from LCD_IO_FUNCTION */
-/* rs==1 -> read data from LCD_IO_DATA */
-#endif
-
-/*************************************************************************
-loops while lcd is busy, returns address counter
-*************************************************************************/
-static uint8_t lcd_waitbusy(void)
-
-{
- register uint8_t c;
-
- /* wait until busy flag is cleared */
- while ((c = lcd_read(0)) & (1 << LCD_BUSY)) {
- }
-
- /* the address counter is updated 4us after the busy flag is cleared */
- delay(LCD_DELAY_BUSY_FLAG);
-
- /* now read the address counter */
- return (lcd_read(0)); // return address counter
-
-} /* lcd_waitbusy */
-
-/*************************************************************************
-Move cursor to the start of next line or to the first line if the cursor
-is already on the last line.
-*************************************************************************/
-static inline void lcd_newline(uint8_t pos) {
- register uint8_t addressCounter;
-
-#if LCD_LINES == 1
- addressCounter = 0;
-#endif
-#if LCD_LINES == 2
- if (pos < (LCD_START_LINE2))
- addressCounter = LCD_START_LINE2;
- else
- addressCounter = LCD_START_LINE1;
-#endif
-#if LCD_LINES == 4
-# if KS0073_4LINES_MODE
- if (pos < LCD_START_LINE2)
- addressCounter = LCD_START_LINE2;
- else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3))
- addressCounter = LCD_START_LINE3;
- else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4))
- addressCounter = LCD_START_LINE4;
- else
- addressCounter = LCD_START_LINE1;
-# else
- if (pos < LCD_START_LINE3)
- addressCounter = LCD_START_LINE2;
- else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4))
- addressCounter = LCD_START_LINE3;
- else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2))
- addressCounter = LCD_START_LINE4;
- else
- addressCounter = LCD_START_LINE1;
-# endif
-#endif
- lcd_command((1 << LCD_DDRAM) + addressCounter);
-
-} /* lcd_newline */
-
-/*
-** PUBLIC FUNCTIONS
-*/
-
-/*************************************************************************
-Send LCD controller instruction command
-Input: instruction to send to LCD controller, see HD44780 data sheet
-Returns: none
-*************************************************************************/
-void lcd_command(uint8_t cmd) {
- lcd_waitbusy();
- lcd_write(cmd, 0);
-}
-
-/*************************************************************************
-Send data byte to LCD controller
-Input: data to send to LCD controller, see HD44780 data sheet
-Returns: none
-*************************************************************************/
-void lcd_data(uint8_t data) {
- lcd_waitbusy();
- lcd_write(data, 1);
-}
-
-/*************************************************************************
-Set cursor to specified position
-Input: x horizontal position (0: left most position)
- y vertical position (0: first line)
-Returns: none
-*************************************************************************/
-void lcd_gotoxy(uint8_t x, uint8_t y) {
-#if LCD_LINES == 1
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
-#endif
-#if LCD_LINES == 2
- if (y == 0)
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
- else
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
-#endif
-#if LCD_LINES == 4
- if (y == 0)
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
- else if (y == 1)
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
- else if (y == 2)
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE3 + x);
- else /* y==3 */
- lcd_command((1 << LCD_DDRAM) + LCD_START_LINE4 + x);
-#endif
-
-} /* lcd_gotoxy */
-
-/*************************************************************************
-*************************************************************************/
-int lcd_getxy(void) {
- return lcd_waitbusy();
-}
-
-/*************************************************************************
-Clear display and set cursor to home position
-*************************************************************************/
-void lcd_clrscr(void) {
- lcd_command(1 << LCD_CLR);
-}
-
-/*************************************************************************
-Set cursor to home position
-*************************************************************************/
-void lcd_home(void) {
- lcd_command(1 << LCD_HOME);
-}
-
-/*************************************************************************
-Display character at current cursor position
-Input: character to be displayed
-Returns: none
-*************************************************************************/
-void lcd_putc(char c) {
- uint8_t pos;
-
- pos = lcd_waitbusy(); // read busy-flag and address counter
- if (c == '\n') {
- lcd_newline(pos);
- } else {
-#if LCD_WRAP_LINES == 1
-# if LCD_LINES == 1
- if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
- }
-# elif LCD_LINES == 2
- if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
- } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
- }
-# elif LCD_LINES == 4
- if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
- } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE3, 0);
- } else if (pos == LCD_START_LINE3 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE4, 0);
- } else if (pos == LCD_START_LINE4 + LCD_DISP_LENGTH) {
- lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
- }
-# endif
- lcd_waitbusy();
-#endif
- lcd_write(c, 1);
- }
-
-} /* lcd_putc */
-
-/*************************************************************************
-Display string without auto linefeed
-Input: string to be displayed
-Returns: none
-*************************************************************************/
-void lcd_puts(const char *s)
-/* print string on lcd (no auto linefeed) */
-{
- register char c;
-
- while ((c = *s++)) {
- lcd_putc(c);
- }
-
-} /* lcd_puts */
-
-/*************************************************************************
-Display string from program memory without auto linefeed
-Input: string from program memory be be displayed
-Returns: none
-*************************************************************************/
-void lcd_puts_p(const char *progmem_s)
-/* print string from program memory on lcd (no auto linefeed) */
-{
- register char c;
-
- while ((c = pgm_read_byte(progmem_s++))) {
- lcd_putc(c);
- }
-
-} /* lcd_puts_p */
-
-/*************************************************************************
-Initialize display and select type of cursor
-Input: dispAttr LCD_DISP_OFF display off
- LCD_DISP_ON display on, cursor off
- LCD_DISP_ON_CURSOR display on, cursor on
- LCD_DISP_CURSOR_BLINK display on, cursor on flashing
-Returns: none
-*************************************************************************/
-void lcd_init(uint8_t dispAttr) {
-#if LCD_IO_MODE
- /*
- * Initialize LCD to 4 bit I/O mode
- */
-
- if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (&LCD_RS_PORT == &LCD_DATA0_PORT) && (&LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) && (LCD_RS_PIN == 4) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6)) {
- /* configure all port bits as output (all LCD lines on same port) */
- DDR(LCD_DATA0_PORT) |= 0x7F;
- } else if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
- /* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */
- DDR(LCD_DATA0_PORT) |= 0x0F;
- DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
- DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
- DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
- } else {
- /* configure all port bits as output (LCD data and control lines on different ports */
- DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
- DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);<