diff options
Diffstat (limited to 'platforms')
39 files changed, 1314 insertions, 458 deletions
diff --git a/platforms/arm_atsam/bootloader.mk b/platforms/arm_atsam/bootloader.mk new file mode 100644 index 0000000000..1ec42edeb6 --- /dev/null +++ b/platforms/arm_atsam/bootloader.mk @@ -0,0 +1,46 @@ +# Copyright 2017 Jack Humbert +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# If it's possible that multiple bootloaders can be used for one project, +# you can leave this unset, and the correct size will be selected +# automatically. +# +# Sets the bootloader defined in the keyboard's/keymap's rules.mk +# +# Current options for ARM (ATSAM): +# md-boot Atmel SAM-BA (only used by Drop boards) +# +# If you need to provide your own implementation, you can set inside `rules.mk` +# `BOOTLOADER = custom` -- you'll need to provide your own implementations. See +# the respective file under `platforms/<PLATFORM>/bootloaders/custom.c` to see +# which functions may be overridden. + +ifeq ($(strip $(BOOTLOADER)), custom) + OPT_DEFS += -DBOOTLOADER_CUSTOM + BOOTLOADER_TYPE = custom +endif + +ifeq ($(strip $(BOOTLOADER)), md-boot) + OPT_DEFS += -DBOOTLOADER_MD_BOOT + BOOTLOADER_TYPE = md_boot +endif + +ifeq ($(strip $(BOOTLOADER_TYPE)),) + ifneq ($(strip $(BOOTLOADER)),) + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,Invalid bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + else + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,No bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + endif +endif diff --git a/platforms/avr/bootloader.mk b/platforms/avr/bootloader.mk new file mode 100644 index 0000000000..63fe635d96 --- /dev/null +++ b/platforms/avr/bootloader.mk @@ -0,0 +1,144 @@ +# Copyright 2017 Jack Humbert +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# If it's possible that multiple bootloaders can be used for one project, +# you can leave this unset, and the correct size will be selected +# automatically. +# +# Sets the bootloader defined in the keyboard's/keymap's rules.mk +# +# Current options for AVR: +# halfkay PJRC Teensy +# caterina Pro Micro (Sparkfun/generic) +# atmel-dfu Atmel factory DFU +# lufa-dfu LUFA DFU +# qmk-dfu QMK DFU (LUFA + blinkenlight) +# qmk-hid QMK HID (LUFA + blinkenlight) +# bootloadhid HIDBootFlash compatible (ATmega32A) +# usbasploader USBaspLoader (ATmega328P) +# +# If you need to provide your own implementation, you can set inside `rules.mk` +# `BOOTLOADER = custom` -- you'll need to provide your own implementations. See +# the respective file under `platforms/<PLATFORM>/bootloaders/custom.c` to see +# which functions may be overridden. +# +# BOOTLOADER_SIZE can still be defined manually, but it's recommended +# you add any possible configuration to this list + +ifeq ($(strip $(BOOTLOADER)), custom) + OPT_DEFS += -DBOOTLOADER_CUSTOM + BOOTLOADER_TYPE = custom +endif + +ifeq ($(strip $(BOOTLOADER)), atmel-dfu) + OPT_DEFS += -DBOOTLOADER_ATMEL_DFU + OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + BOOTLOADER_SIZE = 4096 + endif + ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) + BOOTLOADER_SIZE = 8192 + endif +endif +ifeq ($(strip $(BOOTLOADER)), lufa-dfu) + OPT_DEFS += -DBOOTLOADER_LUFA_DFU + OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + BOOTLOADER_SIZE ?= 4096 + endif + ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) + BOOTLOADER_SIZE ?= 8192 + endif +endif +ifeq ($(strip $(BOOTLOADER)), qmk-dfu) + OPT_DEFS += -DBOOTLOADER_QMK_DFU + OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + BOOTLOADER_SIZE ?= 4096 + endif + ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) + BOOTLOADER_SIZE ?= 8192 + endif +endif +ifeq ($(strip $(BOOTLOADER)), qmk-hid) + OPT_DEFS += -DBOOTLOADER_QMK_HID + OPT_DEFS += -DBOOTLOADER_HID + BOOTLOADER_TYPE = dfu + + BOOTLOADER_SIZE ?= 4096 +endif +ifeq ($(strip $(BOOTLOADER)), halfkay) + OPT_DEFS += -DBOOTLOADER_HALFKAY + BOOTLOADER_TYPE = halfkay + + # Teensy 2.0 + ifeq ($(strip $(MCU)), atmega32u4) + BOOTLOADER_SIZE = 512 + endif + # Teensy 2.0++ + ifeq ($(strip $(MCU)), at90usb1286) + BOOTLOADER_SIZE = 1024 + endif +endif +ifeq ($(strip $(BOOTLOADER)), caterina) + OPT_DEFS += -DBOOTLOADER_CATERINA + BOOTLOADER_TYPE = caterina + + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), bootloadhid) + OPT_DEFS += -DBOOTLOADER_BOOTLOADHID + BOOTLOADER_TYPE = bootloadhid + + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), usbasploader) + OPT_DEFS += -DBOOTLOADER_USBASP + BOOTLOADER_TYPE = usbasploader + + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), lufa-ms) + OPT_DEFS += -DBOOTLOADER_MS + BOOTLOADER_TYPE = dfu + + BOOTLOADER_SIZE ?= 8192 + FIRMWARE_FORMAT = bin +cpfirmware: lufa_warning +.INTERMEDIATE: lufa_warning +lufa_warning: $(FIRMWARE_FORMAT) + $(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@) + $(info LUFA MASS STORAGE Bootloader selected) + $(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!) + $(info It is extremely prone to bricking, and is only included to support existing boards.) + $(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@) +endif +ifdef BOOTLOADER_SIZE + OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE)) +endif + +ifeq ($(strip $(BOOTLOADER_TYPE)),) + ifneq ($(strip $(BOOTLOADER)),) + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,Invalid bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + else + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,No bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + endif +endif diff --git a/platforms/avr/flash.mk b/platforms/avr/flash.mk index e058e8d296..9c2ab72410 100644 --- a/platforms/avr/flash.mk +++ b/platforms/avr/flash.mk @@ -178,9 +178,9 @@ else ifeq ($(strip $(BOOTLOADER)), halfkay) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY) else ifeq (dfu,$(findstring dfu,$(BOOTLOADER))) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU) -else ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp)) +else ifeq ($(strip $(BOOTLOADER)), usbasploader) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_USBASP) -else ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID)) +else ifeq ($(strip $(BOOTLOADER)), bootloadhid) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_BOOTLOADHID) else ifeq ($(strip $(BOOTLOADER)), qmk-hid) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_HID_LUFA) diff --git a/platforms/chibios/boards/BONSAI_C4/board/board.mk b/platforms/chibios/boards/BONSAI_C4/board/board.mk new file mode 100644 index 0000000000..bb00b1a2b0 --- /dev/null +++ b/platforms/chibios/boards/BONSAI_C4/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/boards/BONSAI_C4/configs/board.h b/platforms/chibios/boards/BONSAI_C4/configs/board.h new file mode 100644 index 0000000000..f1ee51c91f --- /dev/null +++ b/platforms/chibios/boards/BONSAI_C4/configs/board.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +#undef STM32_HSE_BYPASS
\ No newline at end of file diff --git a/platforms/chibios/boards/BONSAI_C4/configs/config.h b/platforms/chibios/boards/BONSAI_C4/configs/config.h new file mode 100644 index 0000000000..e412f73d3d --- /dev/null +++ b/platforms/chibios/boards/BONSAI_C4/configs/config.h @@ -0,0 +1,92 @@ +/* Copyright 2022 David Hoelscher, customMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +// Bonsai C4 includes Vbus sensing; derived designs that use PA9 for other purposes +// may disable Vbus sensing with #define BOARD_OTG_NOVBUSSENS 1 + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif + +// FRAM configuration +#ifndef EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN +# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOA, 0) +# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz +# define EXTERNAL_EEPROM_BYTE_COUNT 8192 +# define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip +# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191 +#endif + +// External flash configuration +#ifndef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN +# define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOB, 12) +# define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 2 // 48MHz; max supported by W25Q128JV is 133MHz +# define EXTERNAL_FLASH_BYTE_COUNT (16 * 1024 * 1024) //128Mbit or 16MByte +# define EXTERNAL_FLASH_PAGE_SIZE 256 +# define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200 seconds for flash chip erase +#endif + +// SPI Configuration (needed for FRAM and FLASH) +#ifndef SPI_DRIVER +# define SPI_DRIVER SPID1 +#endif +#ifndef SPI_SCK_PIN +# define SPI_SCK_PIN PAL_LINE(GPIOB, 3) +#endif +#ifndef SPI_MOSI_PIN +# define SPI_MOSI_PIN PAL_LINE(GPIOB, 5) +#endif +#ifndef SPI_MISO_PIN +# define SPI_MISO_PIN PAL_LINE(GPIOB, 4) +#endif + + +// I2C Configuration +#ifdef CONVERT_TO_BONSAI_C4 +# ifndef I2C1_SCL_PIN +# define I2C1_SCL_PIN PAL_LINE(GPIOB, 6) +# endif +# ifndef I2C1_SDA_PIN +# define I2C1_SDA_PIN PAL_LINE(GPIOB, 9) +# endif +#endif + +// WS2812-style LED control on pin A10 +#ifdef WS2812_DRIVER_PWM +# ifndef RGB_DI_PIN +# define RGB_DI_PIN PAL_LINE(GPIOA, 10) +# endif +# ifndef WS2812_PWM_DRIVER +# define WS2812_PWM_DRIVER PWMD1 +# endif +# ifndef WS2812_PWM_CHANNEL +# define WS2812_PWM_CHANNEL 3 +# endif +# ifndef WS2812_PWM_PAL_MODE +# define WS2812_PWM_PAL_MODE 1 +# endif +# ifndef WS2812_DMA_STREAM +# define WS2812_DMA_STREAM STM32_DMA2_STREAM5 +# endif +# ifndef WS2812_DMA_CHANNEL +# define WS2812_DMA_CHANNEL 6 +# endif +#endif + +#ifndef USB_VBUS_PIN +# define USB_VBUS_PIN PAL_LINE(GPIOA, 9) +#endif
\ No newline at end of file diff --git a/platforms/chibios/boards/BONSAI_C4/configs/halconf.h b/platforms/chibios/boards/BONSAI_C4/configs/halconf.h new file mode 100644 index 0000000000..7887e7c9ba --- /dev/null +++ b/platforms/chibios/boards/BONSAI_C4/configs/halconf.h @@ -0,0 +1,49 @@ +/* Copyright 2022 David Hoelscher, customMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#ifndef HAL_USE_SPI +# define HAL_USE_SPI TRUE +#endif + +#ifndef HAL_USE_I2C +# define HAL_USE_I2C TRUE +#endif + +#ifdef SPLIT_KEYBOARD +# ifndef HAL_USE_SERIAL +# define HAL_USE_SERIAL TRUE +# endif +# ifndef SERIAL_BUFFERS_SIZE +# define SERIAL_BUFFERS_SIZE 256 +# endif +#endif + +#ifdef WS2812_DRIVER_PWM +# ifndef HAL_USE_PWM +# define HAL_USE_PWM TRUE +# endif +#endif + +#ifndef SPI_SELECT_MODE +# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +#ifndef SPI_USE_WAIT +# define SPI_USE_WAIT TRUE +#endif + +#include_next <halconf.h>
\ No newline at end of file diff --git a/platforms/chibios/boards/BONSAI_C4/configs/mcuconf.h b/platforms/chibios/boards/BONSAI_C4/configs/mcuconf.h new file mode 100644 index 0000000000..2f9e627c7e --- /dev/null +++ b/platforms/chibios/boards/BONSAI_C4/configs/mcuconf.h @@ -0,0 +1,249 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF +#define STM32F411_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 4 +#define STM32_PLLN_VALUE 96 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 4 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE +#define STM32_GPT_USE_TIM11 FALSE + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM1 TRUE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 TRUE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_HO |