summaryrefslogtreecommitdiffstats
path: root/platforms/chibios
diff options
context:
space:
mode:
Diffstat (limited to 'platforms/chibios')
-rw-r--r--platforms/chibios/eeprom_stm32.c66
-rw-r--r--platforms/chibios/eeprom_stm32_defs.h62
-rw-r--r--platforms/chibios/eeprom_teensy.c15
-rwxr-xr-xplatforms/chibios/eeprom_teensy.h22
4 files changed, 87 insertions, 78 deletions
diff --git a/platforms/chibios/eeprom_stm32.c b/platforms/chibios/eeprom_stm32.c
index acc6a48516..8bf0b19c3d 100644
--- a/platforms/chibios/eeprom_stm32.c
+++ b/platforms/chibios/eeprom_stm32.c
@@ -133,10 +133,6 @@
*/
#include "eeprom_stm32_defs.h"
-#if !defined(FEE_PAGE_SIZE) || !defined(FEE_PAGE_COUNT) || !defined(FEE_MCU_FLASH_SIZE) || !defined(FEE_PAGE_BASE_ADDRESS)
-# error "not implemented."
-#endif
-
/* These bits are used for optimizing encoding of bytes, 0 and 1 */
#define FEE_WORD_ENCODING 0x8000
#define FEE_VALUE_NEXT 0x6000
@@ -144,69 +140,11 @@
#define FEE_VALUE_ENCODED 0x2000
#define FEE_BYTE_RANGE 0x80
-/* Addressable range 16KByte: 0 <-> (0x1FFF << 1) */
-#define FEE_ADDRESS_MAX_SIZE 0x4000
-
/* Flash word value after erase */
#define FEE_EMPTY_WORD ((uint16_t)0xFFFF)
-/* Size of combined compacted eeprom and write log pages */
-#define FEE_DENSITY_MAX_SIZE (FEE_PAGE_COUNT * FEE_PAGE_SIZE)
-
-#ifndef FEE_MCU_FLASH_SIZE_IGNORE_CHECK /* *TODO: Get rid of this check */
-# if FEE_DENSITY_MAX_SIZE > (FEE_MCU_FLASH_SIZE * 1024)
-# pragma message STR(FEE_DENSITY_MAX_SIZE) " > " STR(FEE_MCU_FLASH_SIZE * 1024)
-# error emulated eeprom: FEE_DENSITY_MAX_SIZE is greater than available flash size
-# endif
-#endif
-
-/* Size of emulated eeprom */
-#ifdef FEE_DENSITY_BYTES
-# if (FEE_DENSITY_BYTES > FEE_DENSITY_MAX_SIZE)
-# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE)
-# error emulated eeprom: FEE_DENSITY_BYTES exceeds FEE_DENSITY_MAX_SIZE
-# endif
-# if (FEE_DENSITY_BYTES == FEE_DENSITY_MAX_SIZE)
-# pragma message STR(FEE_DENSITY_BYTES) " == " STR(FEE_DENSITY_MAX_SIZE)
-# warning emulated eeprom: FEE_DENSITY_BYTES leaves no room for a write log. This will greatly increase the flash wear rate!
-# endif
-# if FEE_DENSITY_BYTES > FEE_ADDRESS_MAX_SIZE
-# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_ADDRESS_MAX_SIZE)
-# error emulated eeprom: FEE_DENSITY_BYTES is greater than FEE_ADDRESS_MAX_SIZE allows
-# endif
-# if ((FEE_DENSITY_BYTES) % 2) == 1
-# error emulated eeprom: FEE_DENSITY_BYTES must be even
-# endif
-#else
-/* Default to half of allocated space used for emulated eeprom, half for write log */
-# define FEE_DENSITY_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE / 2)
-#endif
-
-/* Size of write log */
-#ifdef FEE_WRITE_LOG_BYTES
-# if ((FEE_DENSITY_BYTES + FEE_WRITE_LOG_BYTES) > FEE_DENSITY_MAX_SIZE)
-# pragma message STR(FEE_DENSITY_BYTES) " + " STR(FEE_WRITE_LOG_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE)
-# error emulated eeprom: FEE_WRITE_LOG_BYTES exceeds remaining FEE_DENSITY_MAX_SIZE
-# endif
-# if ((FEE_WRITE_LOG_BYTES) % 2) == 1
-# error emulated eeprom: FEE_WRITE_LOG_BYTES must be even
-# endif
-#else
-/* Default to use all remaining space */
-# define FEE_WRITE_LOG_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE - FEE_DENSITY_BYTES)
-#endif
-
-/* Start of the emulated eeprom compacted flash area */
-#define FEE_COMPACTED_BASE_ADDRESS FEE_PAGE_BASE_ADDRESS
-/* End of the emulated eeprom compacted flash area */
-#define FEE_COMPACTED_LAST_ADDRESS (FEE_COMPACTED_BASE_ADDRESS + FEE_DENSITY_BYTES)
-/* Start of the emulated eeprom write log */
-#define FEE_WRITE_LOG_BASE_ADDRESS FEE_COMPACTED_LAST_ADDRESS
-/* End of the emulated eeprom write log */
-#define FEE_WRITE_LOG_LAST_ADDRESS (FEE_WRITE_LOG_BASE_ADDRESS + FEE_WRITE_LOG_BYTES)
-
-#if defined(DYNAMIC_KEYMAP_EEPROM_MAX_ADDR) && (DYNAMIC_KEYMAP_EEPROM_MAX_ADDR >= FEE_DENSITY_BYTES)
-# error emulated eeprom: DYNAMIC_KEYMAP_EEPROM_MAX_ADDR is greater than the FEE_DENSITY_BYTES available
+#if !defined(FEE_PAGE_SIZE) || !defined(FEE_PAGE_COUNT) || !defined(FEE_MCU_FLASH_SIZE) || !defined(FEE_PAGE_BASE_ADDRESS)
+# error "not implemented."
#endif
/* In-memory contents of emulated eeprom for faster access */
diff --git a/platforms/chibios/eeprom_stm32_defs.h b/platforms/chibios/eeprom_stm32_defs.h
index 66904f247f..581434eb5e 100644
--- a/platforms/chibios/eeprom_stm32_defs.h
+++ b/platforms/chibios/eeprom_stm32_defs.h
@@ -72,3 +72,65 @@
# define FEE_PAGE_BASE_ADDRESS ((uintptr_t)(FEE_FLASH_BASE) + FEE_MCU_FLASH_SIZE * 1024 - (FEE_PAGE_COUNT * FEE_PAGE_SIZE))
# endif
#endif
+
+/* Addressable range 16KByte: 0 <-> (0x1FFF << 1) */
+#define FEE_ADDRESS_MAX_SIZE 0x4000
+
+/* Size of combined compacted eeprom and write log pages */
+#define FEE_DENSITY_MAX_SIZE (FEE_PAGE_COUNT * FEE_PAGE_SIZE)
+
+#ifndef FEE_MCU_FLASH_SIZE_IGNORE_CHECK /* *TODO: Get rid of this check */
+# if FEE_DENSITY_MAX_SIZE > (FEE_MCU_FLASH_SIZE * 1024)
+# pragma message STR(FEE_DENSITY_MAX_SIZE) " > " STR(FEE_MCU_FLASH_SIZE * 1024)
+# error emulated eeprom: FEE_DENSITY_MAX_SIZE is greater than available flash size
+# endif
+#endif
+
+/* Size of emulated eeprom */
+#ifdef FEE_DENSITY_BYTES
+# if (FEE_DENSITY_BYTES > FEE_DENSITY_MAX_SIZE)
+# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE)
+# error emulated eeprom: FEE_DENSITY_BYTES exceeds FEE_DENSITY_MAX_SIZE
+# endif
+# if (FEE_DENSITY_BYTES == FEE_DENSITY_MAX_SIZE)
+# pragma message STR(FEE_DENSITY_BYTES) " == " STR(FEE_DENSITY_MAX_SIZE)
+# warning emulated eeprom: FEE_DENSITY_BYTES leaves no room for a write log. This will greatly increase the flash wear rate!
+# endif
+# if FEE_DENSITY_BYTES > FEE_ADDRESS_MAX_SIZE
+# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_ADDRESS_MAX_SIZE)
+# error emulated eeprom: FEE_DENSITY_BYTES is greater than FEE_ADDRESS_MAX_SIZE allows
+# endif
+# if ((FEE_DENSITY_BYTES) % 2) == 1
+# error emulated eeprom: FEE_DENSITY_BYTES must be even
+# endif
+#else
+/* Default to half of allocated space used for emulated eeprom, half for write log */
+# define FEE_DENSITY_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE / 2)
+#endif
+
+/* Size of write log */
+#ifdef FEE_WRITE_LOG_BYTES
+# if ((FEE_DENSITY_BYTES + FEE_WRITE_LOG_BYTES) > FEE_DENSITY_MAX_SIZE)
+# pragma message STR(FEE_DENSITY_BYTES) " + " STR(FEE_WRITE_LOG_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE)
+# error emulated eeprom: FEE_WRITE_LOG_BYTES exceeds remaining FEE_DENSITY_MAX_SIZE
+# endif
+# if ((FEE_WRITE_LOG_BYTES) % 2) == 1
+# error emulated eeprom: FEE_WRITE_LOG_BYTES must be even
+# endif
+#else
+/* Default to use all remaining space */
+# define FEE_WRITE_LOG_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE - FEE_DENSITY_BYTES)
+#endif
+
+/* Start of the emulated eeprom compacted flash area */
+#define FEE_COMPACTED_BASE_ADDRESS FEE_PAGE_BASE_ADDRESS
+/* End of the emulated eeprom compacted flash area */
+#define FEE_COMPACTED_LAST_ADDRESS (FEE_COMPACTED_BASE_ADDRESS + FEE_DENSITY_BYTES)
+/* Start of the emulated eeprom write log */
+#define FEE_WRITE_LOG_BASE_ADDRESS FEE_COMPACTED_LAST_ADDRESS
+/* End of the emulated eeprom write log */
+#define FEE_WRITE_LOG_LAST_ADDRESS (FEE_WRITE_LOG_BASE_ADDRESS + FEE_WRITE_LOG_BYTES)
+
+#if defined(DYNAMIC_KEYMAP_EEPROM_MAX_ADDR) && (DYNAMIC_KEYMAP_EEPROM_MAX_ADDR >= FEE_DENSITY_BYTES)
+# error emulated eeprom: DYNAMIC_KEYMAP_EEPROM_MAX_ADDR is greater than the FEE_DENSITY_BYTES available
+#endif
diff --git a/platforms/chibios/eeprom_teensy.c b/platforms/chibios/eeprom_teensy.c
index 2093f9b4b2..575f51526e 100644
--- a/platforms/chibios/eeprom_teensy.c
+++ b/platforms/chibios/eeprom_teensy.c
@@ -1,6 +1,7 @@
#include <ch.h>
#include <hal.h>
+#include "eeprom_teensy.h"
#include "eeconfig.h"
/*************************************/
@@ -42,18 +43,6 @@
#if defined(K20x) /* chip selection */
/* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */
-// The EEPROM is really RAM with a hardware-based backup system to
-// flash memory. Selecting a smaller size EEPROM allows more wear
-// leveling, for higher write endurance. If you edit this file,
-// set this to the smallest size your application can use. Also,
-// due to Freescale's implementation, writing 16 or 32 bit words
-// (aligned to 2 or 4 byte boundaries) has twice the endurance
-// compared to writing 8 bit bytes.
-//
-# ifndef EEPROM_SIZE
-# define EEPROM_SIZE 32
-# endif
-
/*
^^^ Here be dragons:
NXP AppNote AN4282 section 3.1 states that partitioning must only be done once.
@@ -350,8 +339,6 @@ void do_flash_cmd(volatile uint8_t *fstat)
extern uint32_t __eeprom_workarea_start__;
extern uint32_t __eeprom_workarea_end__;
-# define EEPROM_SIZE 128
-
static uint32_t flashend = 0;
void eeprom_initialize(void) {
diff --git a/platforms/chibios/eeprom_teensy.h b/platforms/chibios/eeprom_teensy.h
new file mode 100755
index 0000000000..ead5998b29
--- /dev/null
+++ b/platforms/chibios/eeprom_teensy.h
@@ -0,0 +1,22 @@
+// Copyright 2022 Nick Brassel (@tzarc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#if defined(K20x)
+/* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */
+// The EEPROM is really RAM with a hardware-based backup system to
+// flash memory. Selecting a smaller size EEPROM allows more wear
+// leveling, for higher write endurance. If you edit this file,
+// set this to the smallest size your application can use. Also,
+// due to Freescale's implementation, writing 16 or 32 bit words
+// (aligned to 2 or 4 byte boundaries) has twice the endurance
+// compared to writing 8 bit bytes.
+//
+# ifndef EEPROM_SIZE
+# define EEPROM_SIZE 32
+# endif
+#elif defined(KL2x) /* Teensy LC (emulated) */
+# define EEPROM_SIZE 128
+#else
+# error Unsupported Teensy EEPROM.
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 10:46:37 +0000