summaryrefslogtreecommitdiffstats
path: root/platforms/chibios/drivers/serial_usart.h
diff options
context:
space:
mode:
Diffstat (limited to 'platforms/chibios/drivers/serial_usart.h')
-rw-r--r--platforms/chibios/drivers/serial_usart.h118
1 files changed, 58 insertions, 60 deletions
diff --git a/platforms/chibios/drivers/serial_usart.h b/platforms/chibios/drivers/serial_usart.h
index 81fe9e0113..fa062cd736 100644
--- a/platforms/chibios/drivers/serial_usart.h
+++ b/platforms/chibios/drivers/serial_usart.h
@@ -1,42 +1,12 @@
-/* Copyright 2021 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
+// Copyright 2021 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "quantum.h"
#include "serial.h"
-#include "printf.h"
-
-#include <ch.h>
#include <hal.h>
-#if !defined(SERIAL_USART_DRIVER)
-# define SERIAL_USART_DRIVER SD1
-#endif
-
-#if !defined(USE_GPIOV1)
-/* The default PAL alternate modes are used to signal that the pins are used for USART. */
-# if !defined(SERIAL_USART_TX_PAL_MODE)
-# define SERIAL_USART_TX_PAL_MODE 7
-# endif
-# if !defined(SERIAL_USART_RX_PAL_MODE)
-# define SERIAL_USART_RX_PAL_MODE 7
-# endif
-#endif
-
#if defined(SOFT_SERIAL_PIN)
# define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN
#endif
@@ -49,6 +19,62 @@
# define SERIAL_USART_RX_PIN A10
#endif
+#if !defined(SELECT_SOFT_SERIAL_SPEED)
+# define SELECT_SOFT_SERIAL_SPEED 1
+#endif
+
+#if defined(SERIAL_USART_SPEED)
+// Allow advanced users to directly set SERIAL_USART_SPEED
+#elif SELECT_SOFT_SERIAL_SPEED == 0
+# define SERIAL_USART_SPEED 460800
+#elif SELECT_SOFT_SERIAL_SPEED == 1
+# define SERIAL_USART_SPEED 230400
+#elif SELECT_SOFT_SERIAL_SPEED == 2
+# define SERIAL_USART_SPEED 115200
+#elif SELECT_SOFT_SERIAL_SPEED == 3
+# define SERIAL_USART_SPEED 57600
+#elif SELECT_SOFT_SERIAL_SPEED == 4
+# define SERIAL_USART_SPEED 38400
+#elif SELECT_SOFT_SERIAL_SPEED == 5
+# define SERIAL_USART_SPEED 19200
+#else
+# error invalid SELECT_SOFT_SERIAL_SPEED value
+#endif
+
+#if !defined(SERIAL_USART_TIMEOUT)
+# define SERIAL_USART_TIMEOUT 20
+#endif
+
+#if HAL_USE_SERIAL
+
+typedef SerialDriver QMKSerialDriver;
+typedef SerialConfig QMKSerialConfig;
+
+# if !defined(SERIAL_USART_DRIVER)
+# define SERIAL_USART_DRIVER SD1
+# endif
+
+#elif HAL_USE_SIO
+
+typedef SIODriver QMKSerialDriver;
+typedef SIOConfig QMKSerialConfig;
+
+# if !defined(SERIAL_USART_DRIVER)
+# define SERIAL_USART_DRIVER SIOD1
+# endif
+
+#endif
+
+#if !defined(USE_GPIOV1)
+/* The default PAL alternate modes are used to signal that the pins are used for USART. */
+# if !defined(SERIAL_USART_TX_PAL_MODE)
+# define SERIAL_USART_TX_PAL_MODE 7
+# endif
+# if !defined(SERIAL_USART_RX_PAL_MODE)
+# define SERIAL_USART_RX_PAL_MODE 7
+# endif
+#endif
+
#if !defined(USART_CR1_M0)
# define USART_CR1_M0 USART_CR1_M // some platforms (f1xx) dont have this so
#endif
@@ -86,31 +112,3 @@
(AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP); \
} while (0)
#endif
-
-#if !defined(SELECT_SOFT_SERIAL_SPEED)
-# define SELECT_SOFT_SERIAL_SPEED 1
-#endif
-
-#if defined(SERIAL_USART_SPEED)
-// Allow advanced users to directly set SERIAL_USART_SPEED
-#elif SELECT_SOFT_SERIAL_SPEED == 0
-# define SERIAL_USART_SPEED 460800
-#elif SELECT_SOFT_SERIAL_SPEED == 1
-# define SERIAL_USART_SPEED 230400
-#elif SELECT_SOFT_SERIAL_SPEED == 2
-# define SERIAL_USART_SPEED 115200
-#elif SELECT_SOFT_SERIAL_SPEED == 3
-# define SERIAL_USART_SPEED 57600
-#elif SELECT_SOFT_SERIAL_SPEED == 4
-# define SERIAL_USART_SPEED 38400
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-# define SERIAL_USART_SPEED 19200
-#else
-# error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif
-
-#if !defined(SERIAL_USART_TIMEOUT)
-# define SERIAL_USART_TIMEOUT 20
-#endif
-
-#define HANDSHAKE_MAGIC 7