summaryrefslogtreecommitdiffstats
path: root/macway
diff options
context:
space:
mode:
Diffstat (limited to 'macway')
-rw-r--r--macway/Makefile53
-rw-r--r--macway/config.h65
-rw-r--r--macway/doc/back.jpgbin122135 -> 0 bytes
-rw-r--r--macway/doc/case.jpgbin146003 -> 0 bytes
-rw-r--r--macway/doc/keys.jpgbin116365 -> 0 bytes
-rw-r--r--macway/doc/side.jpgbin109755 -> 0 bytes
-rw-r--r--macway/doc/switch.jpgbin115526 -> 0 bytes
-rw-r--r--macway/doc/teensy.jpgbin165814 -> 0 bytes
-rw-r--r--macway/doc/wiring.jpgbin165569 -> 0 bytes
-rw-r--r--macway/doc/withHHKB.jpgbin152832 -> 0 bytes
-rw-r--r--macway/doc/withThinkPad.jpgbin118993 -> 0 bytes
-rw-r--r--macway/keymap.c195
-rw-r--r--macway/led.c24
-rw-r--r--macway/matrix.c271
14 files changed, 0 insertions, 608 deletions
diff --git a/macway/Makefile b/macway/Makefile
deleted file mode 100644
index 83d31b6747..0000000000
--- a/macway/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-# Target file name (without extension).
-TARGET = macway
-
-# Directory common source filess exist
-TOP_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = main.c \
- keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/macway/config.h b/macway/config.h
deleted file mode 100644
index 2e68bf252f..0000000000
--- a/macway/config.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xBEE0
-#define MANUFACTURER t.m.k.
-#define PRODUCT Macway mod
-#define DESCRIPTION t.m.k. keyboard firmware for Macway mod
-
-
-/* matrix size */
-#define MATRIX_ROWS 9
-#define MATRIX_COLS 8
-/* define if matrix has ghost */
-#define MATRIX_HAS_GHOST
-/* Set 0 if need no debouncing */
-#define DEBOUNCE 5
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \
- keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \
-)
-
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 192
-#endif
-
-
-/* PS/2 mouse */
-#ifdef PS2_MOUSE_ENABLE
-# define PS2_CLOCK_PORT PORTF
-# define PS2_CLOCK_PIN PINF
-# define PS2_CLOCK_DDR DDRF
-# define PS2_CLOCK_BIT 0
-# define PS2_DATA_PORT PORTF
-# define PS2_DATA_PIN PINF
-# define PS2_DATA_DDR DDRF
-# define PS2_DATA_BIT 1
-#endif
-
-#endif
diff --git a/macway/doc/back.jpg b/macway/doc/back.jpg
deleted file mode 100644
index 0774401f69..0000000000
--- a/macway/doc/back.jpg
+++ /dev/null
Binary files differ
diff --git a/macway/doc/case.jpg b/macway/doc/case.jpg
deleted file mode 100644
index c776d5e054..0000000000
--- a/macway/doc/case.jpg
+++ /dev/null
Binary files differ
diff --git a/macway/doc/keys.jpg b/macway/doc/keys.jpg
deleted file mode 100644
index f340ebe8e4..0000000000
--- a/macway/doc/keys.jpg
+++ /dev/null
Binary files differ
diff --git a/macway/doc/side.jpg b/macway/doc/side.jpg
deleted file mode 100644
index bdf8268f25..0000000000
--- a/macway/doc/side.jpg
+++ /dev/null
Binary files differ
diff --git a/macway/doc/switch.jpg b/macway/doc/switch.jpg
deleted file mode 100644
index a1500d707d..0000000000
--- a/macway/doc/switch.jpg
+++ /dev/null
Binary files differ
diff --git a/macway/doc/teensy.jpg b/macway/doc/teensy.jpg
deleted file mode 100644
index 07207475d5..0000000000
--- a/macway/doc/teensy.jpg
+++ /dev/null
Binary files differ
diff --git a/macway/doc/wiring.jpg b/macway/doc/wiring.jpg
deleted file mode 100644
index 0f3490f105..0000000000
--- a/macway/doc/wiring.jpg
+++ /dev/null
Binary files differ
diff --git a/macway/doc/withHHKB.jpg b/macway/doc/withHHKB.jpg
deleted file mode 100644
index 9921856e7b..0000000000
--- a/macway/doc/withHHKB.jpg
+++ /dev/null
Binary files differ
diff --git a/macway/doc/withThinkPad.jpg b/macway/doc/withThinkPad.jpg
deleted file mode 100644
index 231c61d036..0000000000
--- a/macway/doc/withThinkPad.jpg
+++ /dev/null
Binary files differ
diff --git a/macway/keymap.c b/macway/keymap.c
deleted file mode 100644
index ae9f595fce..0000000000
--- a/macway/keymap.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Keymap for Macway mod
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "usb_keycodes.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-// Convert physical keyboard layout to matrix array.
-// This is a macro to define keymap easily in keyboard layout form.
-#define KEYMAP( \
- K11, K10, K20, K30, K40, K41, K51, K50, K60, K70, K80, K81, K61, K02, \
- K12, K13, K23, K33, K43, K42, K52, K53, K63, K73, K83, K82, K62, \
- K15, K14, K24, K34, K44, K45, K55, K54, K64, K74, K84, K85, K06, \
- K67, K16, K26, K36, K46, K47, K57, K56, K66, K76, K87, K32, K35, \
- K75, K22, K00, K07, K21, K04, K37, K27, K17 \
-) { \
- { KB_##K00, KB_NO, KB_##K02, KB_NO, KB_##K04, KB_NO, KB_##K06, KB_##K07 }, \
- { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
- { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_NO, KB_##K26, KB_##K27 }, \
- { KB_##K30, KB_NO, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
- { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
- { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
- { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_NO, KB_##K66, KB_##K67 }, \
- { KB_##K70, KB_NO, KB_NO, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_NO }, \
- { KB_##K80, KB_##K81, KB_##K82, KB_##K83, KB_##K84, KB_##K85, KB_NO, KB_##K87 } \
-}
-
-#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
- 0, // Fn0
- 1, // Fn1
- 2, // Fn2
- 3, // Fn3
- 4, // Fn4
- 0, // Fn5
- 2, // Fn6
- 3 // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
- KB_NO, // Fn0
- KB_NO, // Fn1
- KB_SLSH, // Fn2
- KB_SCLN, // Fn3
- KB_SPC, // Fn4
- KB_NO, // Fn5
- KB_NO, // Fn6
- KB_NO // Fn7
-};
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Layer 0: Default Layer
- * ,-----------------------------------------------------------.
- * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |
- * |-----------------------------------------------------' |
- * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn1|
- * |-----------------------------------------------------------|
- * |Fn7|Gui |Alt |Fn4 |Alt |Gui|Fn6|Fn6|Ctr|
- * `-----------------------------------------------------------'
- */
- KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, \
- LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \
- FN7, LGUI,LALT,FN4, RALT,BSLS,GRV, FN6, RCTL),
-
-
- /* Layer 1: HHKB mode (HHKB Fn)
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
- * |-----------------------------------------------------------|
- * |Caps | | | | | | | |Psc|Slk|Pus|Up | | |
- * |-----------------------------------------------------' |
- * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
- * |-----------------------------------------------------------|
- * |Shift | | | | | | +| -|End|PgD|Dow|Shift |xxx|
- * |-----------------------------------------------------------|
- * | |Gui |Alt | |Alt |Gui| | |Ctr|
- * `-----------------------------------------------------------'
- */
- KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \
- CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, \
- LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
- LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
- NO, LGUI,LALT,SPC, RALT,NO, NO, NO, RCTL),
-
-
- /* Layer 2: Vi mode (Quote/Rmeta)
- * ,-----------------------------------------------------------.
- * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| ` |
- * |-----------------------------------------------------------|
- * | \ |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End| | | | |
- * |-----------------------------------------------------' |
- * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | | \ |
- * |-----------------------------------------------------------|
- * |Shift | | | | | |Hom|PgD|PgU|End|xxx|Shift | |
- * |-----------------------------------------------------------|
- * | |Gui |Alt |Space |Alt |Gui|Fn6|Fn6|Ctr|
- * `-----------------------------------------------------------'
- */
- KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \
- BSLS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, \
- LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, BSLS, \
- LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,NO, \
- NO, LGUI,LALT,SPC, RALT,RGUI,FN6, FN6, RCTL),
-
-
- /* Layer 3: Mouse mode (Semicolon)
- * ,-----------------------------------------------------------.
- * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| ` |
- * |-----------------------------------------------------------|
- * | \ |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR| | | | |
- * |-----------------------------------------------------' |
- * |Contro| |McL|McD|McR| |McL|McD|McU|McR|xxx| | \ |
- * |-----------------------------------------------------------|
- * |Shift | | |Mb1|Mb2|Mb3|Mb2|Mb1| | | |Shift | |
- * |-----------------------------------------------------------|
- * |xxx|Gui |Alt |Mb1 |Alt | | | | |
- * `-----------------------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
- */
- KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \
- BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, \
- LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \
- LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \
- FN7, LGUI,LALT,BTN1,RALT,NO, NO, NO, NO),
-
-
- /* Layer 4: Matias half keyboard style (Space)
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
- * |-----------------------------------------------------------|
- * |Backs| P| O| I| U| Y| T| R| E| W| Q|Tab|Tab| |
- * |-----------------------------------------------------' |
- * |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control |
- * |-----------------------------------------------------------|
- * |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | |
- * |-----------------------------------------------------------|
- * | |Gui |Alt |xxxxxxxxxxxxxxxxxxxxxx|Alt |Gui| | |Ctr|
- * `-----------------------------------------------------------'
- */
- KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, ESC, \
- BSPC,P, O, I, U, Y, T, R, E, W, Q, TAB, TAB, \
- LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \
- LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \
- NO, LGUI,LALT,FN4, RALT,RGUI,NO, NO, RCTL),
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
- return KEYCODE(layer, row, col);
-}
-
-uint8_t keymap_fn_layer(uint8_t fn_bits)
-{
- return pgm_read_byte(&fn_layer[biton(fn_bits)]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t fn_bits)
-{
- return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
-}
diff --git a/macway/led.c b/macway/led.c
deleted file mode 100644
index f76545f0ba..0000000000
--- a/macway/led.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-}
diff --git a/macway/matrix.c b/macway/matrix.c
deleted file mode 100644
index 56fb858960..0000000000
--- a/macway/matrix.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-
-#if (MATRIX_COLS > 16)
-# error "MATRIX_COLS must not exceed 16"
-#endif
-#if (MATRIX_ROWS > 255)
-# error "MATRIX_ROWS must not exceed 255"
-#endif
-
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 0
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-// matrix state buffer(1:on, 0:off)
-#if (MATRIX_COLS <= 8)
-static uint8_t *matrix;
-static uint8_t *matrix_prev;
-static uint8_t _matrix0[MATRIX_ROWS];
-static uint8_t _matrix1[MATRIX_ROWS];
-#else
-static uint16_t *matrix;
-static uint16_t *matrix_prev;
-static uint16_t _matrix0[MATRIX_ROWS];
-static uint16_t _matrix1[MATRIX_ROWS];
-#endif
-
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-static uint8_t read_col(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- // initialize row and col
- unselect_rows();
- // Input with pull-up(DDR:0, PORT:1)
- DDRB = 0x00;
- PORTB = 0xFF;
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
- for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
- matrix = _matrix0;
- matrix_prev = _matrix1;
-}
-
-uint8_t matrix_scan(void)
-{
- if (!debouncing) {
- uint8_t *tmp = matrix_prev;
- matrix_prev = matrix;
- matrix = tmp;
- }
-
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- unselect_rows();
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- if (matrix[i] != (uint8_t)~read_col()) {
- matrix[i] = (uint8_t)~read_col();
- if (debouncing) {
- debug("bounce!: "); debug_hex(debouncing); print("\n");
- }
- debouncing = DEBOUNCE;
- }
- }
- unselect_rows();
-
- if (debouncing) {
- debouncing--;
- }
-
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix[i] != matrix_prev[i]) {
- return true;
- }
- }
- return false;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-#ifdef MATRIX_HAS_GHOST
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix_has_ghost_in_row(i))
- return true;
- }
-#endif
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-inline
-#if (MATRIX_COLS <= 8)
-uint8_t matrix_get_row(uint8_t row)
-#else
-uint16_t matrix_get_row(uint8_t row)
-#endif
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 01234567\n");
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- phex(row); print(": ");
-#if (MATRIX_COLS <= 8)
- pbin_reverse(matrix_get_row(row));
-#else
- pbin_reverse16(matrix_get_row(row));
-#endif
-#ifdef MATRIX_HAS_GHOST
- if (matrix_has_ghost_in_row(row)) {
- print(" <ghost");
- }
-#endif
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-#if (MATRIX_COLS <= 8)
- count += bitpop(matrix[i]);
-#else
- count += bitpop16(matrix[i]);
-#endif
- }
- return count;
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
- // no ghost exists in case less than 2 keys on
- if (((matrix[row] - 1) & matrix[row]) == 0)
- return false;
-
- // ghost exists in case same state as other row
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- if (i != row && (matrix[i] & matrix[row]) == matrix[row])
- return true;
- }
- return false;
-}
-#endif
-
-inline
-static uint8_t read_col(void)
-{
- return PINB;
-}
-
-inline
-static void unselect_rows(void)
-{
- // Hi-Z(DDR:0, PORT:0) to unselect
- DDRC &= ~0b11000000; // PC: 7,6
- PORTC &= ~0b11000000;
- DDRD &= ~0b11000111; // PD: 7,6,2,1,0
- PORTD &= ~0b11000111;
- DDRF &= ~0b11000000; // PF: 7,6
- PORTF &= ~0b11000000;
-}
-
-inline
-static void select_row(uint8_t row)
-{
- // Output low(DDR:1, PORT:0) to select
- // row: 0 1 2 3 4 5 6 7 8
- // pin: PD0, PC7, PD7, PF6, PD6, PD1, PD2, PC6, PF7
- switch (row) {
- case 0:
- DDRD |= (1<<0);
- PORTD &= ~(1<<0);
- break;
- case 1:
- DDRC |= (1<<7);
- PORTC &= ~(1<<7);
- break;
- case 2:
- DDRD |= (1<<7);
- PORTD &= ~(1<<7);
- break;
- case 3:
- DDRF |= (1<<6);
- PORTF &= ~(1<<6);
- break;
- case 4:
- DDRD |= (1<<6);
- PORTD &= ~(1<<6);
- break;
- case 5:
- DDRD |= (1<<1);
- PORTD &= ~(1<<1);
- break;
- case 6:
- DDRD |= (1<<2);
- PORTD &= ~(1<<2);
- break;
- case 7:
- DDRC |= (1<<6);
- PORTC &= ~(1<<6);
- break;
- case 8:
- DDRF |= (1<<7);
- PORTF &= ~(1<<7);
- break;
- }
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 10:56:51 +0000