diff options
Diffstat (limited to 'lib/lufa/Projects/Webserver/Lib/FATFs/ffconf.h')
| -rw-r--r-- | lib/lufa/Projects/Webserver/Lib/FATFs/ffconf.h | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/lib/lufa/Projects/Webserver/Lib/FATFs/ffconf.h b/lib/lufa/Projects/Webserver/Lib/FATFs/ffconf.h deleted file mode 100644 index 243a20fa22..0000000000 --- a/lib/lufa/Projects/Webserver/Lib/FATFs/ffconf.h +++ /dev/null @@ -1,190 +0,0 @@ -/*---------------------------------------------------------------------------/ -/ FatFs - FAT file system module configuration file R0.09a (C)ChaN, 2012 -/----------------------------------------------------------------------------/ -/ -/ CAUTION! Do not forget to make clean the project after any changes to -/ the configuration options. -/ -/----------------------------------------------------------------------------*/ -#ifndef _FFCONF -#define _FFCONF 4004 /* Revision ID */ - - -/*---------------------------------------------------------------------------/ -/ Function and Buffer Configurations -/----------------------------------------------------------------------------*/ - -#define _FS_TINY 1 /* 0:Normal or 1:Tiny */ -/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system -/ object instead of the sector buffer in the individual file object for file -/ data transfer. This reduces memory consumption 512 bytes each file object. */ - - -#define _FS_READONLY 1 /* 0:Read/Write or 1:Read only */ -/* Setting _FS_READONLY to 1 defines read only configuration. This removes -/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename, -/ f_truncate and useless f_getfree. */ - - -#define _FS_MINIMIZE 2 /* 0 to 3 */ -/* The _FS_MINIMIZE option defines minimization level to remove some functions. -/ -/ 0: Full function. -/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename -/ are removed. -/ 2: f_opendir and f_readdir are removed in addition to 1. -/ 3: f_lseek is removed in addition to 2. */ - - -#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */ -/* To enable string functions, set _USE_STRFUNC to 1 or 2. */ - - -#define _USE_MKFS 0 /* 0:Disable or 1:Enable */ -/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */ - - -#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */ -/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */ - - -#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */ -/* To enable fast seek feature, set _USE_FASTSEEK to 1. */ - - - -/*---------------------------------------------------------------------------/ -/ Locale and Namespace Configurations -/----------------------------------------------------------------------------*/ - -#define _CODE_PAGE 932 -/* The _CODE_PAGE specifies the OEM code page to be used on the target system. -/ Incorrect setting of the code page can cause a file open failure. -/ -/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows) -/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows) -/ 949 - Korean (DBCS, OEM, Windows) -/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows) -/ 1250 - Central Europe (Windows) -/ 1251 - Cyrillic (Windows) -/ 1252 - Latin 1 (Windows) -/ 1253 - Greek (Windows) -/ 1254 - Turkish (Windows) -/ 1255 - Hebrew (Windows) -/ 1256 - Arabic (Windows) -/ 1257 - Baltic (Windows) -/ 1258 - Vietnam (OEM, Windows) -/ 437 - U.S. (OEM) -/ 720 - Arabic (OEM) -/ 737 - Greek (OEM) -/ 775 - Baltic (OEM) -/ 850 - Multilingual Latin 1 (OEM) -/ 858 - Multilingual Latin 1 + Euro (OEM) -/ 852 - Latin 2 (OEM) -/ 855 - Cyrillic (OEM) -/ 866 - Russian (OEM) -/ 857 - Turkish (OEM) -/ 862 - Hebrew (OEM) -/ 874 - Thai (OEM, Windows) -/ 1 - ASCII only (Valid for non LFN cfg.) -*/ - - -#define _USE_LFN 0 /* 0 to 3 */ -#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ -/* The _USE_LFN option switches the LFN support. -/ -/ 0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect. -/ 1: Enable LFN with static working buffer on the BSS. Always NOT reentrant. -/ 2: Enable LFN with dynamic working buffer on the STACK. -/ 3: Enable LFN with dynamic working buffer on the HEAP. -/ -/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN, -/ Unicode handling functions ff_convert() and ff_wtoupper() must be added -/ to the project. When enable to use heap, memory control functions -/ ff_memalloc() and ff_memfree() must be added to the project. */ - - -#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */ -/* To switch the character code set on FatFs API to Unicode, -/ enable LFN feature and set _LFN_UNICODE to 1. */ - - -#define _FS_RPATH 0 /* 0 to 2 */ -/* The _FS_RPATH option configures relative path feature. -/ -/ 0: Disable relative path feature and remove related functions. -/ 1: Enable relative path. f_chdrive() and f_chdir() are available. -/ 2: f_getcwd() is available in addition to 1. -/ -/ Note that output of the f_readdir function is affected by this option. */ - - - -/*---------------------------------------------------------------------------/ -/ Physical Drive Configurations -/----------------------------------------------------------------------------*/ - -#define _VOLUMES 1 -/* Number of volumes (logical drives) to be used. */ - - -#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */ -/* Maximum sector size to be handled. -/ Always set 512 for memory card and hard disk but a larger value may be -/ required for on-board flash memory, floppy disk and optical disk. -/ When _MAX_SS is larger than 512, it configures FatFs to variable sector size -/ and GET_SECTOR_SIZE command must be implemented to the disk_ioctl function. */ - - -#define _MULTI_PARTITION 0 /* 0:Single partition, 1/2:Enable multiple partition */ -/* When set to 0, each volume is bound to the same physical drive number and -/ it can mount only first primary partition. When it is set to 1, each volume -/ is tied to the partitions listed in VolToPart[]. */ - - -#define _USE_ERASE 0 /* 0:Disable or 1:Enable */ -/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command -/ should be added to the disk_ioctl function. */ - - - -/*---------------------------------------------------------------------------/ -/ System Configurations -/----------------------------------------------------------------------------*/ - -#define _WORD_ACCESS 1 /* 0 or 1 */ -/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS -/ option defines which access method is used to the word data on the FAT volume. -/ -/ 0: Byte-by-byte access. -/ 1: Word access. Do not choose this unless following condition is met. -/ -/ When the byte order on the memory is big-endian or address miss-aligned word -/ access results incorrect behavior, the _WORD_ACCESS must be set to 0. -/ If it is not the case, the value can also be set to 1 to improve the -/ performance and code size. */ - - -/* A header file that defines sync object types on the O/S, such as -/ windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */ - -#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ -#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */ -#define _SYNC_t HANDLE /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */ - -/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module. -/ -/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect. -/ 1: Enable reentrancy. Also user provided synchronization handlers, -/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj -/ function must be added to the project. */ - - -#define _FS_LOCK 0 /* 0:Disable or >=1:Enable */ -/* To enable file lock control feature, set _FS_LOCK to 1 or greater. - The value defines how many files can be opened simultaneously. */ - - -#endif /* _FFCONFIG */ - |