diff options
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c')
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c b/lib/lufa/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c new file mode 100644 index 0000000000..0b33c212f8 --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c @@ -0,0 +1,207 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * V2Protocol parameter handler, to process V2 Protocol device parameters. + */ + +#define INCLUDE_FROM_V2PROTOCOL_PARAMS_C +#include "V2ProtocolParams.h" + +/* Non-Volatile Parameter Values for EEPROM storage */ +static uint8_t EEMEM EEPROM_Reset_Polarity = 0x01; + +/* Non-Volatile Parameter Values for EEPROM storage */ +static uint8_t EEMEM EEPROM_SCK_Duration = 0x06; + +/* Volatile Parameter Values for RAM storage */ +static ParameterItem_t ParameterTable[] = + { + { .ParamID = PARAM_BUILD_NUMBER_LOW, + .ParamPrivileges = PARAM_PRIV_READ, + .ParamValue = 0 }, + + { .ParamID = PARAM_BUILD_NUMBER_HIGH, + .ParamPrivileges = PARAM_PRIV_READ, + .ParamValue = 0 }, + + { .ParamID = PARAM_HW_VER, + .ParamPrivileges = PARAM_PRIV_READ, + .ParamValue = 0x00 }, + + { .ParamID = PARAM_SW_MAJOR, + .ParamPrivileges = PARAM_PRIV_READ, + .ParamValue = 0x01 }, + + { .ParamID = PARAM_SW_MINOR, + .ParamPrivileges = PARAM_PRIV_READ, + .ParamValue = FIRMWARE_VERSION_MINOR }, + + { .ParamID = PARAM_VTARGET, + .ParamPrivileges = PARAM_PRIV_READ, + .ParamValue = (uint8_t)(3.3 * 10) }, + + { .ParamID = PARAM_SCK_DURATION, + .ParamPrivileges = PARAM_PRIV_READ | PARAM_PRIV_WRITE, + .ParamValue = 6 }, + + { .ParamID = PARAM_RESET_POLARITY, + .ParamPrivileges = PARAM_PRIV_READ | PARAM_PRIV_WRITE, + .ParamValue = 0x01 }, + + { .ParamID = PARAM_STATUS_TGT_CONN, + .ParamPrivileges = PARAM_PRIV_READ, + .ParamValue = STATUS_ISP_READY }, + + { .ParamID = PARAM_DISCHARGEDELAY, + .ParamPrivileges = PARAM_PRIV_READ | PARAM_PRIV_WRITE, + .ParamValue = 0x00 }, + }; + + +/** Loads saved non-volatile parameter values from the EEPROM into the parameter table, as needed. */ +void V2Params_LoadNonVolatileParamValues(void) +{ + /* Read parameter values that are stored in non-volatile EEPROM */ + uint8_t ResetPolarity = eeprom_read_byte(&EEPROM_Reset_Polarity); + uint8_t SCKDuration = eeprom_read_byte(&EEPROM_SCK_Duration); + + /* Update current parameter table if the EEPROM contents was not blank */ + if (ResetPolarity != 0xFF) + V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = ResetPolarity; + + /* Update current parameter table if the EEPROM contents was not blank */ + if (SCKDuration != 0xFF) + V2Params_GetParamFromTable(PARAM_SCK_DURATION)->ParamValue = SCKDuration; +} + +/** Updates any parameter values that are sourced from hardware rather than explicitly set by the host, such as + * VTARGET levels from the ADC on supported AVR models. + */ +void V2Params_UpdateParamValues(void) +{ + #if (defined(ADC) && !defined(NO_VTARGET_DETECT)) + /* Update VTARGET parameter with the latest ADC conversion of VTARGET on supported AVR models */ + V2Params_GetParamFromTable(PARAM_VTARGET)->ParamValue = (((uint16_t)(VTARGET_REF_VOLTS * 10 * VTARGET_SCALE_FACTOR) * ADC_GetResult()) / 1024); + #endif +} + +/** Retrieves the host PC read/write privileges for a given parameter in the parameter table. This should + * be called before calls to \ref V2Params_GetParameterValue() or \ref V2Params_SetParameterValue() when + * getting or setting parameter values in response to requests from the host. + * + * \param[in] ParamID Parameter ID whose privileges are to be retrieved from the table + * + * \return Privileges for the requested parameter, as a mask of \c PARAM_PRIV_* masks + */ +uint8_t V2Params_GetParameterPrivileges(const uint8_t ParamID) +{ + ParameterItem_t* const ParamInfo = V2Params_GetParamFromTable(ParamID); + + if (ParamInfo == NULL) + return 0; + + return ParamInfo->ParamPrivileges; +} + +/** Retrieves the current value for a given parameter in the parameter table. + * + * \note This function does not first check for read privileges - if the value is being sent to the host via a + * GET PARAM command, \ref V2Params_GetParameterPrivileges() should be called first to ensure that the + * parameter is host-readable. + * + * \param[in] ParamID Parameter ID whose value is to be retrieved from the table + * + * \return Current value of the parameter in the table, or 0 if not found + */ +uint8_t V2Params_GetParameterValue(const uint8_t ParamID) +{ + ParameterItem_t* const ParamInfo = V2Params_GetParamFromTable(ParamID); + + if (ParamInfo == NULL) + return 0; + + return ParamInfo->ParamValue; +} + +/** Sets the value for a given parameter in the parameter table. + * + * \note This function does not first check for write privileges - if the value is being sourced from the host + * via a SET PARAM command, \ref V2Params_GetParameterPrivileges() should be called first to ensure that the + * parameter is host-writable. + * + * \param[in] ParamID Parameter ID whose value is to be set in the table + * \param[in] Value New value to set the parameter to + * + * \return Pointer to the associated parameter information from the parameter table if found, NULL otherwise + */ +void V2Params_SetParameterValue(const uint8_t ParamID, + const uint8_t Value) +{ + ParameterItem_t* const ParamInfo = V2Params_GetParamFromTable(ParamID); + + if (ParamInfo == NULL) + return; + + ParamInfo->ParamValue = Value; + + /* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */ + if (ParamID == PARAM_RESET_POLARITY) + eeprom_update_byte(&EEPROM_Reset_Polarity, Value); + + /* The target SCK line period is a non-volatile parameter, save to EEPROM when changed */ + if (ParamID == PARAM_SCK_DURATION) + eeprom_update_byte(&EEPROM_SCK_Duration, Value); +} + +/** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given + * parameter ID. + * + * \param[in] ParamID Parameter ID to find in the table + * + * \return Pointer to the associated parameter information from the parameter table if found, NULL otherwise + */ +static ParameterItem_t* const V2Params_GetParamFromTable(const uint8_t ParamID) +{ + ParameterItem_t* CurrTableItem = ParameterTable; + + /* Find the parameter in the parameter table if present */ + for (uint8_t TableIndex = 0; TableIndex < TABLE_PARAM_COUNT; TableIndex++) + { + if (ParamID == CurrTableItem->ParamID) + return CurrTableItem; + + CurrTableItem++; + } + + return NULL; +} + |