diff options
Diffstat (limited to 'lib/lufa/Demos/Host/LowLevel/GenericHIDHost')
9 files changed, 3259 insertions, 0 deletions
diff --git a/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h new file mode 100644 index 0000000000..197122fce1 --- /dev/null +++ b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c new file mode 100644 index 0000000000..c98f0fbcec --- /dev/null +++ b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c @@ -0,0 +1,183 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations + * needed to communication with an attached USB device. Descriptors are special computer-readable structures + * which the host requests upon device enumeration, to determine the device's capabilities and functions. + */ + +#include "ConfigDescriptor.h" + +/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This + * routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate + * with compatible devices. + * + * This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint. + * + * \return An error code from the \ref GenericHIDHost_GetConfigDescriptorDataCodes_t enum. + */ +uint8_t ProcessConfigurationDescriptor(void) +{ + uint8_t ConfigDescriptorData[512]; + void* CurrConfigLocation = ConfigDescriptorData; + uint16_t CurrConfigBytesRem; + + USB_Descriptor_Interface_t* HIDInterface = NULL; + USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; + USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; + + /* Retrieve the entire configuration descriptor into the allocated buffer */ + switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData))) + { + case HOST_GETCONFIG_Successful: + break; + case HOST_GETCONFIG_InvalidData: + return InvalidConfigDataReturned; + case HOST_GETCONFIG_BuffOverflow: + return DescriptorTooLarge; + default: + return ControlError; + } + + while (!(DataINEndpoint) || !(DataOUTEndpoint)) + { + /* See if we've found a likely compatible interface, and if there is an endpoint within that interface */ + if (!(HIDInterface) || + USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation, + DComp_NextHIDInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found) + { + /* Not all HID devices have an OUT endpoint - if we've reached the end of the HID descriptor + * but only found the mandatory IN endpoint, it's safe to continue with the device enumeration */ + if (DataINEndpoint) + break; + + /* Get the next HID interface from the configuration descriptor */ + if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation, + DComp_NextHIDInterface) != DESCRIPTOR_SEARCH_COMP_Found) + { + /* Descriptor not found, error out */ + return NoCompatibleInterfaceFound; + } + + /* Save the interface in case we need to refer back to it later */ + HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t); + + /* Clear any found endpoints */ + DataOUTEndpoint = NULL; + + /* Skip the remainder of the loop as we have not found an endpoint yet */ + continue; + } + + /* Retrieve the endpoint address from the endpoint descriptor */ + USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); + + /* If the endpoint is a IN type endpoint */ + if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN) + DataINEndpoint = EndpointData; + else + DataOUTEndpoint = EndpointData; + } + + /* Configure the HID data IN pipe */ + Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); + Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); + + /* Check if the HID interface contained an optional OUT data endpoint */ + if (DataOUTEndpoint) + { + /* Configure the HID data OUT pipe */ + Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); + } + + /* Valid data found, return success */ + return SuccessfulConfigRead; +} + +/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's + * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration + * descriptor processing if an incompatible descriptor configuration is found. + * + * This comparator searches for the next Interface descriptor of the correct HID Class value. + * + * \return A value from the DSEARCH_Return_ErrorCodes_t enum + */ +uint8_t DComp_NextHIDInterface(void* CurrentDescriptor) +{ + USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t); + + /* Determine if the current descriptor is an interface descriptor */ + if (Header->Type == DTYPE_Interface) + { + USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t); + + /* Check the HID descriptor class, break out if correct class/protocol interface found */ + if (Interface->Class == HID_CSCP_HIDClass) + { + /* Indicate that the descriptor being searched for has been found */ + return DESCRIPTOR_SEARCH_Found; + } + } + + /* Current descriptor does not match what this comparator is looking for */ + return DESCRIPTOR_SEARCH_NotFound; +} + +/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's + * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration + * descriptor processing if an incompatible descriptor configuration is found. + * + * This comparator searches for the next Endpoint descriptor inside the current interface descriptor, + * aborting the search if another interface descriptor is found before the required endpoint. + * + * \return A value from the DSEARCH_Return_ErrorCodes_t enum + */ +uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor) +{ + USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t); + + /* Determine the type of the current descriptor */ + if (Header->Type == DTYPE_Endpoint) + { + /* Indicate that the descriptor being searched for has been found */ + return DESCRIPTOR_SEARCH_Found; + } + else if (Header->Type == DTYPE_Interface) + { + /* Indicate that the search has failed prematurely and should be aborted */ + return DESCRIPTOR_SEARCH_Fail; + } + + /* Current descriptor does not match what this comparator is looking for */ + return DESCRIPTOR_SEARCH_NotFound; +} + diff --git a/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h new file mode 100644 index 0000000000..8e7289124b --- /dev/null +++ b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h @@ -0,0 +1,69 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for ConfigDescriptor.c. + */ + +#ifndef _CONFIGDESCRIPTOR_H_ +#define _CONFIGDESCRIPTOR_H_ + + /* Includes: */ + #include <LUFA/Drivers/USB/USB.h> + + #include "GenericHIDHost.h" + + /* Macros: */ + /** Pipe address for the HID data IN pipe. */ + #define HID_DATA_IN_PIPE (PIPE_DIR_IN | 1) + + /** Pipe address for the HID data OUT pipe. */ + #define HID_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) + + /* Enums: */ + /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ + enum GenericHIDHost_GetConfigDescriptorDataCodes_t + { + SuccessfulConfigRead = 0, /**< Configuration Descriptor was processed successfully */ + ControlError = 1, /**< A control request to the device failed to complete successfully */ + DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */ + InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */ + NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */ + }; + + /* Function Prototypes: */ + uint8_t ProcessConfigurationDescriptor(void); + + uint8_t DComp_NextHIDInterface(void* CurrentDescriptor); + uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor); + +#endif + diff --git a/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c new file mode 100644 index 0000000000..413ce375b7 --- /dev/null +++ b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c @@ -0,0 +1,269 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the GenericHIDHost demo. This file contains the main tasks of + * the demo and is responsible for the initial application hardware configuration. + */ + +#include "GenericHIDHost.h" + +/** Main program entry point. This routine configures the hardware required by the application, then + * enters a loop to run the application tasks in sequence. + */ +int main(void) +{ + SetupHardware(); + + puts_P(PSTR(ESC_FG_CYAN "Generic HID Host Demo running.\r\n" ESC_FG_WHITE)); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + GlobalInterruptEnable(); + + for (;;) + { + ReadNextReport(); + + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ +#if (ARCH == ARCH_AVR8) + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); +#endif + + /* Hardware Initialization */ + Serial_Init(9600, false); + LEDs_Init(); + USB_Init(); + + /* Create a stdio stream for the serial port for stdin and stdout */ + Serial_CreateStream(NULL); +} + +/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and + * starts the library USB task to begin the enumeration and USB management process. + */ +void EVENT_USB_Host_DeviceAttached(void) +{ + puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE)); + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and + * stops the library USB task management process. + */ +void EVENT_USB_Host_DeviceUnattached(void) +{ + puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE)); + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully + * enumerated by the host and is now ready to be used by the application. + */ +void EVENT_USB_Host_DeviceEnumerationComplete(void) +{ + puts_P(PSTR("Getting Config Data.\r\n")); + + uint8_t ErrorCode; + + /* Get and process the configuration descriptor data */ + if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) + { + if (ErrorCode == ControlError) + puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n")); + else + puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); + + printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + return; + } + + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ + if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) + { + printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + return; + } + + puts_P(PSTR("HID Device Enumerated.\r\n")); + LEDs_SetAllLEDs(LEDMASK_USB_READY); +} + +/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ +void EVENT_USB_Host_HostError(const uint8_t ErrorCode) +{ + USB_Disable(); + + printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n" + " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + for(;;); +} + +/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while + * enumerating an attached USB device. + */ +void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode) +{ + printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n" + " -- Error Code %d\r\n" + " -- Sub Error Code %d\r\n" + " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); +} + +/** Reads in and processes the next report from the attached device, displaying the report + * contents on the board LEDs and via the serial port. + */ +void ReadNextReport(void) +{ + if (USB_HostState != HOST_STATE_Configured) + return; + + /* Select and unfreeze HID data IN pipe */ + Pipe_SelectPipe(HID_DATA_IN_PIPE); + Pipe_Unfreeze(); + + /* Check to see if a packet has been received */ + if (!(Pipe_IsINReceived())) + { + /* Refreeze HID data IN pipe */ + Pipe_Freeze(); + + return; + } + + /* Ensure pipe contains data before trying to read from it */ + if (Pipe_IsReadWriteAllowed()) + { + uint8_t ReportINData[Pipe_BytesInPipe()]; + + /* Read in HID report data */ + Pipe_Read_Stream_LE(&ReportINData, sizeof(ReportINData), NULL); + + /* Print report data through the serial port */ + for (uint16_t CurrByte = 0; CurrByte < sizeof(ReportINData); CurrByte++) + printf_P(PSTR("0x%02X "), ReportINData[CurrByte]); + + puts_P(PSTR("\r\n")); + } + + /* Clear the IN endpoint, ready for next data packet */ + Pipe_ClearIN(); + + /* Refreeze HID data IN pipe */ + Pipe_Freeze(); +} + +/** Writes a report to the attached device. + * + * \param[in] ReportOUTData Buffer containing the report to send to the device + * \param[in] ReportIndex Index of the report in the device (zero if the device does not use multiple reports) + * \param[in] ReportType Type of report to send, either REPORT_TYPE_OUT or REPORT_TYPE_FEATURE + * \param[in] ReportLength Length of the report to send + */ +void WriteNextReport(uint8_t* ReportOUTData, + const uint8_t ReportIndex, + const uint8_t ReportType, + uint16_t ReportLength) +{ + if (USB_HostState != HOST_STATE_Configured) + return; + + /* Select the HID data OUT pipe */ + Pipe_SelectPipe(HID_DATA_OUT_PIPE); + + /* Not all HID devices have an OUT endpoint (some require OUT reports to be sent over the + * control endpoint instead) - check to see if the OUT endpoint has been initialized */ + if (Pipe_IsConfigured() && (ReportType == REPORT_TYPE_OUT)) + { + Pipe_Unfreeze(); + + /* Ensure pipe is ready to be written to before continuing */ + if (!(Pipe_IsOUTReady())) + { + /* Refreeze the data OUT pipe */ + Pipe_Freeze(); + + return; + } + + /* If the report index is used, send it before the report data */ + if (ReportIndex) + Pipe_Write_8(ReportIndex); + + /* Write out HID report data */ + Pipe_Write_Stream_LE(ReportOUTData, ReportLength, NULL); + + /* Clear the OUT endpoint, send last data packet */ + Pipe_ClearOUT(); + + /* Refreeze the data OUT pipe */ + Pipe_Freeze(); + } + else + { + /* Class specific request to send a HID report to the device */ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE), + .bRequest = HID_REQ_SetReport, + .wValue = ((ReportType << 8) | ReportIndex), + .wIndex = 0, + .wLength = ReportLength, + }; + + /* Select the control pipe for the request transfer */ + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + /* Send the request to the device */ + USB_Host_SendControlRequest(ReportOUTData); + } +} + diff --git a/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h new file mode 100644 index 0000000000..39ee9ed1c9 --- /dev/null +++ b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for GenericHIDHost.c. + */ + +#ifndef _GENERICHID_HOST_H_ +#define _GENERICHID_HOST_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/wdt.h> + #include <avr/pgmspace.h> + #include <avr/interrupt.h> + #include <avr/power.h> + #include <stdio.h> + + #include <LUFA/Drivers/Misc/TerminalCodes.h> + #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Drivers/Peripheral/Serial.h> + #include <LUFA/Drivers/Board/LEDs.h> + #include <LUFA/Platform/Platform.h> + + #include "ConfigDescriptor.h" + + /* Macros: */ + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ + #define LEDMASK_USB_NOTREADY LEDS_LED1 + + /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ + #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ + #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) + + /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ + #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) + + /** HID Report Type to indicate an IN report. */ + #define REPORT_TYPE_IN 1 + + /** HID Report Type to indicate an OUT report. */ + #define REPORT_TYPE_OUT 2 + + /** HID Report Type to indicate a FEATURE report. */ + #define REPORT_TYPE_FEATURE 3 + + /* Function Prototypes: */ + void SetupHardware(void); + void ReadNextReport(void); + void WriteNextReport(uint8_t* ReportOUTData, + const uint8_t ReportIndex, + const uint8_t ReportType, + uint16_t ReportLength); + + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); + void EVENT_USB_Host_DeviceAttached(void); + void EVENT_USB_Host_DeviceUnattached(void); + void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode); + void EVENT_USB_Host_DeviceEnumerationComplete(void); + +#endif + diff --git a/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt new file mode 100644 index 0000000000..1c9b1875a9 --- /dev/null +++ b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt @@ -0,0 +1,64 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Generic HID Host Demo + * + * \section Sec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Host</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Human Interface Device (HID)</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>N/A</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF HID Specification \n + * USBIF HID Usage Tables</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>Low Speed Mode \n + * Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * Generic HID host demonstration application. This gives a simple reference + * application for implementing a Generic HID USB host, for any device implementing + * the HID profile. + * + * Received reports from the attached device are printed to the serial port. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <td> + * None + * </td> + * </tr> + * </table> + */ + diff --git a/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/asf.xml b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/asf.xml new file mode 100644 index 0000000000..2321a8139c --- /dev/null +++ b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/asf.xml @@ -0,0 +1,50 @@ +<asf xmlversion="1.0">
+ <project caption="Generic HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.generic_hid.example.avr8">
+ <require idref="lufa.demos.host.lowlevel.generic_hid"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+ </project>
+
+ <module type="application" id="lufa.demos.host.lowlevel.generic_hid" caption="Generic HID Host Demo (Low Level APIs)">
+ <info type="description" value="summary">
+ Generic HID Host demo, implementing a basic USB HID device that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Low Level APIs"/>
+ <keyword value="USB Host"/>
+ <keyword value="HID Class"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="GenericHIDHost.txt"/>
+
+ <build type="c-source" value="GenericHIDHost.c"/>
+ <build type="c-source" value="ConfigDescriptor.c"/>
+ <build type="header-file" value="GenericHIDHost.h"/>
+ <build type="header-file" value="ConfigDescriptor.h"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.peripheral.usart"/>
+ <require idref="lufa.drivers.misc.ansi"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ </module>
+</asf>
diff --git a/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/doxyfile b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/doxyfile new file mode 100644 index 0000000000..1a87042649 --- /dev/null +++ b/lib/lufa/Demos/Host/LowLevel/GenericHIDHost/doxyfile @@ -0,0 +1,2395 @@ +# Doxyfile 1.8.9 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "LUFA Library - Generic HID Host Demo" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into whic |