1 files changed, 76 insertions, 0 deletions
diff --git a/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
new file mode 100644
index 0000000000..3813745c8c
--- /dev/null
+++ b/lib/lufa/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
@@ -0,0 +1,76 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Keyboard Device Demo
+ *
+ *  \section Sec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Human Interface Device (HID)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Keyboard Subclass</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF HID Specification \n
+ *        USBIF HID Usage Tables</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Low Speed Mode \n
+ *        Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Keyboard demonstration application. This gives a simple reference application
+ *  for implementing a USB Keyboard using the basic USB HID drivers in all modern
+ *  OSes (i.e. no special drivers required). It is boot protocol compatible, and thus
+ *  works under compatible BIOS as if it was a native keyboard (e.g. PS/2).
+ *
+ *  On start-up the system will automatically enumerate and function as a keyboard
+ *  when the USB connection to a host is present. To use the keyboard example,
+ *  manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
+ *  documentation for more information on sending keyboard event and key presses. Unlike
+ *  other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses
+ *  inside the same report to the host.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+