summaryrefslogtreecommitdiffstats
path: root/layouts/community/split_3x6_3
diff options
context:
space:
mode:
Diffstat (limited to 'layouts/community/split_3x6_3')
-rw-r--r--layouts/community/split_3x6_3/drashna/config.h43
-rw-r--r--layouts/community/split_3x6_3/drashna/keymap.c112
-rw-r--r--layouts/community/split_3x6_3/drashna/rules.mk3
3 files changed, 61 insertions, 97 deletions
diff --git a/layouts/community/split_3x6_3/drashna/config.h b/layouts/community/split_3x6_3/drashna/config.h
index dd950ce7bc..b86448c671 100644
--- a/layouts/community/split_3x6_3/drashna/config.h
+++ b/layouts/community/split_3x6_3/drashna/config.h
@@ -31,11 +31,11 @@
#ifdef RGBLIGHT_ENABLE
# undef RGBLED_NUM
-# define RGBLED_NUM 27
+# define RGBLED_NUM 27
-# define RGBLIGHT_HUE_STEP 8
-# define RGBLIGHT_SAT_STEP 8
-# define RGBLIGHT_VAL_STEP 5
+# define RGBLIGHT_HUE_STEP 8
+# define RGBLIGHT_SAT_STEP 8
+# define RGBLIGHT_VAL_STEP 5
# define RGBLIGHT_LIMIT_VAL 120
#endif
@@ -44,37 +44,38 @@
# undef RGB_DI_PIN
# define RGB_DI_PIN A3
# endif
-# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
-# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-# define RGB_MATRIX_HUE_STEP 8
-# define RGB_MATRIX_SAT_STEP 8
-# define RGB_MATRIX_VAL_STEP 5
-# define RGB_MATRIX_SPD_STEP 10
+# ifndef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+# endif
+# define RGB_MATRIX_HUE_STEP 8
+# define RGB_MATRIX_SAT_STEP 8
+# define RGB_MATRIX_VAL_STEP 5
+# define RGB_MATRIX_SPD_STEP 10
#endif
#ifdef CONVERT_TO_PROTON_C
-# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
-# define WS2812_PWM_CHANNEL 4 // default: 2
-# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
+# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
+# define WS2812_PWM_CHANNEL 4 // default: 2
+# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
# undef SOFT_SERIAL_PIN
-# define SOFT_SERIAL_PIN D3
-# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
-# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+# define SOFT_SERIAL_PIN D3
+# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
+# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
// #define INIT_EE_HANDS_LEFT
// #define INIT_EE_HANDS_RIGHT
#endif
-
#if defined(AUDIO_ENABLE) && !defined(CONVERT_TO_PROTON_C)
# define AUDIO_PIN B6
# define NO_MUSIC_MODE
diff --git a/layouts/community/split_3x6_3/drashna/keymap.c b/layouts/community/split_3x6_3/drashna/keymap.c
index 5a2d2f2e27..6e71527a41 100644
--- a/layouts/community/split_3x6_3/drashna/keymap.c
+++ b/layouts/community/split_3x6_3/drashna/keymap.c
@@ -37,58 +37,34 @@ enum crkbd_keycodes { RGBRST = NEW_SAFE_RANGE };
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \
ALT_T(KC_TAB), K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(K1B), \
OS_LSFT, CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, RCTL_T(K2A), OS_RSFT, \
- RGB_MOD, KC_SPC, BK_LWER, DL_RAIS, KC_ENT, OS_RGUI \
+ OS_LGUI, KC_SPC, BK_LWER, DL_RAIS, KC_ENT, OS_RGUI \
)
-#define LAYOUT_split_3x6_3_base_wrapper(...) LAYOUT_split_3x6_3_base(__VA_ARGS__)
+#define LAYOUT_base_wrapper(...) LAYOUT_split_3x6_3_base(__VA_ARGS__)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [_QWERTY] = LAYOUT_split_3x6_3_base_wrapper(
- _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
- _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
- _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
- ),
-
- [_COLEMAK] = LAYOUT_split_3x6_3_base_wrapper(
- _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
- _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
- _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
- ),
-
- [_DVORAK] = LAYOUT_split_3x6_3_base_wrapper(
- _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
- _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
- _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
- ),
-
- [_WORKMAN] = LAYOUT_split_3x6_3_base_wrapper(
- _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
- _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
- _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
- ),
-
- [_NORMAN] = LAYOUT_split_3x6_3_base_wrapper(
- _________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
- _________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
- _________________NORMAN_L3_________________, _________________NORMAN_R3_________________
- ),
-
- [_MALTRON] = LAYOUT_split_3x6_3_base_wrapper(
- _________________MALTRON_L1________________, _________________MALTRON_R1________________,
- _________________MALTRON_L2________________, _________________MALTRON_R2________________,
- _________________MALTRON_L3________________, _________________MALTRON_R3________________
- ),
-
- [_EUCALYN] = LAYOUT_split_3x6_3_base_wrapper(
- _________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
- _________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
- _________________EUCALYN_L3________________, _________________EUCALYN_R3________________
- ),
-
- [_CARPLAX] = LAYOUT_split_3x6_3_base_wrapper(
- _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
- _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
- _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
- ),
+ [_DEFAULT_LAYER_1] = LAYOUT_base_wrapper(
+ _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+ _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+ _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+ ),
+
+ [_DEFAULT_LAYER_2] = LAYOUT_base_wrapper(
+ ______________COLEMAK_MOD_DH_L1____________, ______________COLEMAK_MOD_DH_R1____________,
+ ______________COLEMAK_MOD_DH_L2____________, ______________COLEMAK_MOD_DH_R2____________,
+ ______________COLEMAK_MOD_DH_L3____________, ______________COLEMAK_MOD_DH_R3____________
+ ),
+
+ [_DEFAULT_LAYER_3] = LAYOUT_base_wrapper(
+ _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+ _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+ _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+ ),
+
+ [_DEFAULT_LAYER_4] = LAYOUT_base_wrapper(
+ _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+ _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+ _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+ ),
[_LOWER] = LAYOUT_split_3x6_3_wrapper(
KC_F11, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11,
@@ -114,9 +90,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// clang-format on
#ifdef OLED_DRIVER_ENABLE
-oled_rotation_t oled_init_user(oled_rotation_t rotation) {
- return OLED_ROTATION_270;
-}
+oled_rotation_t oled_init_keymap(oled_rotation_t rotation) { return OLED_ROTATION_270; }
#endif
#ifdef TAPPING_TERM_PER_KEY
@@ -130,7 +104,6 @@ uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
}
#endif
-
void matrix_slave_scan_user(void) {
#ifdef RGB_MATRIX_ENABLE
rgb_matrix_task();
@@ -145,28 +118,16 @@ void suspend_wakeup_init_keymap(void) { rgb_matrix_set_suspend_state(false); }
void check_default_layer(uint8_t mode, uint8_t type, uint8_t led_min, uint8_t led_max) {
switch (get_highest_layer(default_layer_state)) {
case _QWERTY:
- rgb_matrix_layer_helper(HSV_CYAN, mode, rgb_matrix_config.speed, type, led_min, led_max);
+ rgb_matrix_layer_helper(DEFAULT_LAYER_1_HSV, mode, rgb_matrix_config.speed, type, led_min, led_max);
+ break;
+ case _COLEMAK_DH:
+ rgb_matrix_layer_helper(DEFAULT_LAYER_2_HSV, mode, rgb_matrix_config.speed, type, led_min, led_max);
break;
case _COLEMAK:
- rgb_matrix_layer_helper(HSV_MAGENTA, mode, rgb_matrix_config.speed, type, led_min, led_max);
+ rgb_matrix_layer_helper(DEFAULT_LAYER_3_HSV, mode, rgb_matrix_config.speed, type, led_min, led_max);
break;
case _DVORAK:
- rgb_matrix_layer_helper(HSV_SPRINGGREEN, mode, rgb_matrix_config.speed, type, led_min, led_max);
- break;
- case _WORKMAN:
- rgb_matrix_layer_helper(HSV_GOLDENROD, mode, rgb_matrix_config.speed, type, led_min, led_max);
- break;
- case _NORMAN:
- rgb_matrix_layer_helper(HSV_CORAL, mode, rgb_matrix_config.speed, type, led_min, led_max);
- break;
- case _MALTRON:
- rgb_matrix_layer_helper(HSV_YELLOW, mode, rgb_matrix_config.speed, type, led_min, led_max);
- break;
- case _EUCALYN:
- rgb_matrix_layer_helper(HSV_PINK, mode, rgb_matrix_config.speed, type, led_min, led_max);
- break;
- case _CARPLAX:
- rgb_matrix_layer_helper(HSV_BLUE, mode, rgb_matrix_config.speed, type, led_min, led_max);
+ rgb_matrix_layer_helper(DEFAULT_LAYER_4_HSV, mode, rgb_matrix_config.speed, type, led_min, led_max);
break;
}
}
@@ -189,10 +150,11 @@ void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
case _ADJUST:
rgb_matrix_layer_helper(HSV_RED, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW, led_min, led_max);
break;
- default: {
- check_default_layer(0, LED_FLAG_UNDERGLOW, led_min, led_max);
- break;
- }
+ default:
+ {
+ check_default_layer(0, LED_FLAG_UNDERGLOW, led_min, led_max);
+ break;
+ }
}
check_default_layer(0, LED_FLAG_MODIFIER, led_min, led_max);
}
diff --git a/layouts/community/split_3x6_3/drashna/rules.mk b/layouts/community/split_3x6_3/drashna/rules.mk
index cbb0b1c113..e0ac86d698 100644
--- a/layouts/community/split_3x6_3/drashna/rules.mk
+++ b/layouts/community/split_3x6_3/drashna/rules.mk
@@ -3,7 +3,7 @@
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
-BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
@@ -31,4 +31,5 @@ ifeq ($(strip $(CTPC)), yes)
WS2812_DRIVER = pwm # won't work without a patch to the ctpc mk file
SERIAL_DRIVER = usart
SWAP_HANDS_ENABLE = yes
+ WPM_ENABLE = yes
endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 19:46:47 +0000