diff options
Diffstat (limited to 'layouts/community/ortho_4x12/drashna/config.h')
| -rw-r--r-- | layouts/community/ortho_4x12/drashna/config.h | 65 |
1 files changed, 62 insertions, 3 deletions
diff --git a/layouts/community/ortho_4x12/drashna/config.h b/layouts/community/ortho_4x12/drashna/config.h index 9f3d2b82d6..d8ac5e6d11 100644 --- a/layouts/community/ortho_4x12/drashna/config.h +++ b/layouts/community/ortho_4x12/drashna/config.h @@ -1,7 +1,7 @@ #pragma once #if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM) -# define RGB_DI_PIN B3 +# define RGB_DI_PIN A0 # define RGBLED_NUM 13 // Number of LEDs # define RGBLIGHT_ANIMATIONS # define RGBLIGHT_HUE_STEP 12 @@ -17,10 +17,12 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) -# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 # define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +# undef RGB_MATRIX_LED_PROCESS_LIMIT +# undef RGB_MATRIX_LED_FLUSH_LIMIT #endif #if defined(KEYBOARD_lets_split_rev2) @@ -32,7 +34,17 @@ #if !defined(KEYBOARD_planck_light) # ifdef RGBLIGHT_ENABLE # define NO_MUSIC_MODE -# endif // RGBLIGHT_ENABLE +# endif // RGBLIGHT_ENABLE +#else +# undef QMK_ESC_OUTPUT +# define QMK_ESC_OUTPUT E6 // usually COL +# undef QMK_ESC_INPUT +# define QMK_ESC_INPUT B0 // usually ROW +# undef QMK_LED +# define QMK_LED D6 +# undef QMK_SPEAKER +# define QMK_SPEAKER B5 +# define SOLENOID_PIN A1 #endif // KEYBOARD_planck_light #if defined(KEYBOARD_planck) @@ -69,3 +81,50 @@ /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ +#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ +#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ + +/* default 3V ERM vibration motor voltage and library*/ +#if FB_ERM_LRA == 0 +#define RATED_VOLTAGE 3 +#define V_RMS 2.3 +#define V_PEAK 3.30 +/* Library Selection */ +#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ + +/* default 2V LRA voltage and library */ +#elif FB_ERM_LRA == 1 +#define RATED_VOLTAGE 2 +#define V_RMS 2.0 +#define V_PEAK 2.85 +#define F_LRA 200 +/* Library Selection */ +#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ + +#endif + +/* Control 1 register settings */ +#define DRIVE_TIME 25 +#define AC_COUPLE 0 +#define STARTUP_BOOST 1 + +/* Control 2 Settings */ +#define BIDIR_INPUT 1 +#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ +#define SAMPLE_TIME 3 +#define BLANKING_TIME 1 +#define IDISS_TIME 1 + +/* Control 3 settings */ +#define NG_THRESH 2 +#define ERM_OPEN_LOOP 1 +#define SUPPLY_COMP_DIS 0 +#define DATA_FORMAT_RTO 0 +#define LRA_DRIVE_MODE 0 +#define N_PWM_ANALOG 0 +#define LRA_OPEN_LOOP 0 +/* Control 4 settings */ +#define ZC_DET_TIME 0 +#define AUTO_CAL_TIME 3 |