summaryrefslogtreecommitdiffstats
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h21
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c227
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md14
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk11
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h35
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c199
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md14
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk10
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c78
-rw-r--r--keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h32
-rw-r--r--keyboards/crkbd/rev1/matrix.c50
11 files changed, 684 insertions, 7 deletions
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h b/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h
new file mode 100644
index 0000000000..bdd1a099ae
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h
@@ -0,0 +1,21 @@
+#pragma once
+
+/* Select hand configuration */
+
+#define MASTER_RIGHT
+// #define EE_HANDS
+
+#define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c
new file mode 100644
index 0000000000..48f60419fb
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c
@@ -0,0 +1,227 @@
+#include QMK_KEYBOARD_H
+#include "bootloader.h"
+#ifdef PROTOCOL_LUFA
+ #include "lufa.h"
+ #include "split_util.h"
+#endif
+#ifdef SSD1306OLED
+ #include "ssd1306.h"
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+enum layer_names {
+ _QWERTY,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ RGBRST,
+ MBTN1,
+ SCRL
+};
+
+#define KC______ KC_TRNS
+#define KC_XXXXX KC_NO
+#define KC_LOWER LOWER
+#define KC_RAISE RAISE
+#define KC_RST RESET
+#define KC_LRST RGBRST
+#define KC_LTOG RGB_TOG
+#define KC_LHUI RGB_HUI
+#define KC_LHUD RGB_HUD
+#define KC_LSAI RGB_SAI
+#define KC_LSAD RGB_SAD
+#define KC_LVAI RGB_VAI
+#define KC_LVAD RGB_VAD
+#define KC_LMOD RGB_MOD
+
+#define KC_CTLA CTL_T(KC_A)
+#define KC_CTLSC CTL_T(KC_SCLN)
+#define KC_SFTZ SFT_T(KC_Z)
+#define KC_SFTSL SFT_T(KC_SLSH)
+#define KC_WINX LWIN_T(KC_X)
+#define KC_WINDO RWIN_T(KC_DOT)
+
+#define KC_MBTN1 MBTN1
+#define KC_SCRL SCRL
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = LAYOUT_kc(
+ //,-----------------------------------------. ,-----------------------------------------.
+ ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ TAB, CTLA, S, D, F, G, H, J, K, L, CTLSC, QUOT,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ GRAVE, SFTZ, WINX, C, V, B, N, M, COMM, WINDO, SFTSL,BSLASH,
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ LOWER, SPC, SCRL, MBTN1, ENT, RAISE
+ //`--------------------' `--------------------'
+ ),
+
+ [_LOWER] = LAYOUT_kc(
+ //,-----------------------------------------. ,-----------------------------------------.
+ ESC, XXXXX, PGDN, PSCR, PGUP, LBRC, RBRC, 7, 8, 9, XXXXX, XXXXX,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ XXXXX, LCTRL, PLUS, MINS, EQL, LPRN, RPRN, 4, 5, 6, RCTRL, XXXXX,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ XXXXX, LSFT, HOME, XXXXX, END, LCBR, RCBR, 1, 2, 3, RSFT, XXXXX,
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ LOWER, SPC, SCRL, MBTN1, ENT, 0
+ //`--------------------' `--------------------'
+ ),
+
+ [_RAISE] = LAYOUT_kc(
+ //,-----------------------------------------. ,-----------------------------------------.
+ ESC, XXXXX, F7, F8, F9, F10, BTN2, BTN2, MNXT, MPRV, MPLY, MSTP,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ XXXXX, LCTRL, F4, F5, F6, F11, LEFT, DOWN, UP, RIGHT, RCTRL, XXXXX,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ XXXXX, LSFT, F1, F2, F3, F12, XXXXX, XXXXX, VOLU, VOLD, MUTE, RSFT,
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ LOWER, SPC, SCRL, MBTN1, ENT, RAISE
+ //`--------------------' `--------------------'
+ ),
+
+ [_ADJUST] = LAYOUT_kc(
+ //,-----------------------------------------. ,-----------------------------------------.
+ RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RST,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ LOWER, SPC, SCRL, MBTN1, ENT, RAISE
+ //`--------------------' `--------------------'
+ )
+};
+
+int RGB_current_mode;
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+ if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+ layer_on(layer3);
+ } else {
+ layer_off(layer3);
+ }
+}
+
+void matrix_init_user(void) {
+ #ifdef RGBLIGHT_ENABLE
+ RGB_current_mode = rgblight_config.mode;
+ #endif
+ //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+ #ifdef SSD1306OLED
+ iota_gfx_init(!has_usb()); // turns on the display
+ #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+void matrix_scan_user(void) {
+ iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+ if (is_master) {
+ // If you want to change the display of OLED, you need to change here
+ matrix_write_ln(matrix, read_layer_state());
+ matrix_write_ln(matrix, read_keylog());
+ matrix_write_ln(matrix, read_keylogs());
+ } else {
+ matrix_write(matrix, read_logo());
+ }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+void iota_gfx_task_user(void) {
+ struct CharacterMatrix matrix;
+ matrix_clear(&matrix);
+ matrix_render_user(&matrix);
+ matrix_update(&display, &matrix);
+}
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+#ifdef SSD1306OLED
+ set_keylog(keycode, record);
+#endif
+ }
+
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case RGB_MOD:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ rgblight_mode(RGB_current_mode);
+ rgblight_step();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ return false;
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
+
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md b/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md
new file mode 100644
index 0000000000..91b884749f
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/readme.md
@@ -0,0 +1,14 @@
+# CrKbd with the Trackpad support
+
+CrKbd version that supports BlackBerry 8520 trackpad via additional PCB.
+See this repository for more details:
+ - https://github.com/vlukash/corne-trackpad
+ - https://vlukash.com/2019/01/15/trackpad-in-keycap-corne-crkbd-keyboard
+
+This firmware is for the Left keyboard.
+
+# Build
+
+```
+make crkbd:vlukash_trackpad_left:dfu
+```
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk b/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk
new file mode 100644
index 0000000000..46be73c475
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk
@@ -0,0 +1,11 @@
+# Build Options
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
+
+BOOTLOADER = atmel-dfu
+
+# If you want to change the display of OLED, you need to change here
+SRC += ./lib/glcdfont.c \
+ ./lib/rgb_state_reader.c \
+ ./lib/layer_state_reader.c \
+ ./lib/logo_reader.c \
+ ./lib/keylogger.c \
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h b/keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h
new file mode 100644
index 0000000000..8cbd8e9078
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/config.h
@@ -0,0 +1,35 @@
+#pragma once
+
+#define NO_DEBUG_LEDS
+
+// Connector PCB version
+// 1 - PCB that supports flex caple and the trackpad sensor is mounted on an 'H' keycap
+// - https://github.com/vlukash/corne-trackpad/tree/master/connector
+// 2 - PCB woth no flex option, track sensor mounted directly on the PCB
+// - https://github.com/vlukash/corne-trackpad/tree/master/connector-no-flex
+#define TRACKPAD_CONNECTOR_VER 1
+
+/* Select hand configuration */
+#define MASTER_RIGHT
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 300
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/* key matrix size */
+// Rows are doubled-up
+#undef MATRIX_COL_PINS
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B7, D5 }
+
+/* ws2812 RGB LED */
+#undef RGB_DI_PIN
+#define RGB_DI_PIN B5
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c b/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c
new file mode 100644
index 0000000000..8749f7a686
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c
@@ -0,0 +1,199 @@
+#include QMK_KEYBOARD_H
+#include "bootloader.h"
+#include "mousekey.h"
+#include "pointing_device.h"
+#include "report.h"
+
+#ifdef PROTOCOL_LUFA
+ #include "lufa.h"
+ #include "split_util.h"
+#endif
+
+extern bool isScrollMode;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+enum layer_names {
+ _QWERTY,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ RGBRST,
+ MBTN1,
+ SCRL
+};
+
+#define KC______ KC_TRNS
+#define KC_XXXXX KC_NO
+#define KC_LOWER LOWER
+#define KC_RAISE RAISE
+#define KC_RST RESET
+#define KC_LRST RGBRST
+#define KC_LTOG RGB_TOG
+#define KC_LHUI RGB_HUI
+#define KC_LHUD RGB_HUD
+#define KC_LSAI RGB_SAI
+#define KC_LSAD RGB_SAD
+#define KC_LVAI RGB_VAI
+#define KC_LVAD RGB_VAD
+#define KC_LMOD RGB_MOD
+
+#define KC_CTLA CTL_T(KC_A)
+#define KC_CTLSC CTL_T(KC_SCLN)
+#define KC_SFTZ SFT_T(KC_Z)
+#define KC_SFTSL SFT_T(KC_SLSH)
+#define KC_WINX LWIN_T(KC_X)
+#define KC_WINDO RWIN_T(KC_DOT)
+
+#define KC_MBTN1 MBTN1
+#define KC_SCRL SCRL
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = LAYOUT_kc(
+ //,-----------------------------------------. ,-----------------------------------------.
+ ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ TAB, CTLA, S, D, F, G, H, J, K, L, CTLSC, QUOT,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ GRAVE, SFTZ, WINX, C, V, B, N, M, COMM, WINDO, SFTSL,BSLASH,
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ LOWER, SPC, SCRL, MBTN1, ENT, RAISE
+ //`--------------------' `--------------------'
+ ),
+
+ [_LOWER] = LAYOUT_kc(
+ //,-----------------------------------------. ,-----------------------------------------.
+ ESC, XXXXX, PGDN, PSCR, PGUP, LBRC, RBRC, 7, 8, 9, XXXXX, XXXXX,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ XXXXX, LCTRL, PLUS, MINS, EQL, LPRN, RPRN, 4, 5, 6, RCTRL, XXXXX,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ XXXXX, LSFT, HOME, XXXXX, END, LCBR, RCBR, 1, 2, 3, RSFT, XXXXX,
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ LOWER, SPC, SCRL, MBTN1, ENT, 0
+ //`--------------------' `--------------------'
+ ),
+
+ [_RAISE] = LAYOUT_kc(
+ //,-----------------------------------------. ,-----------------------------------------.
+ ESC, XXXXX, F7, F8, F9, F10, BTN2, BTN2, MNXT, MPRV, MPLY, MSTP,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ XXXXX, LCTRL, F4, F5, F6, F11, LEFT, DOWN, UP, RIGHT, RCTRL, XXXXX,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ XXXXX, LSFT, F1, F2, F3, F12, XXXXX, XXXXX, VOLU, VOLD, MUTE, RSFT,
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ LOWER, SPC, SCRL, MBTN1, ENT, RAISE
+ //`--------------------' `--------------------'
+ ),
+
+ [_ADJUST] = LAYOUT_kc(
+ //,-----------------------------------------. ,-----------------------------------------.
+ RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RST,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+ //|------+------+------+------+------+------| |------+------+------+------+------+------|
+ LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
+ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ LOWER, SPC, SCRL, MBTN1, ENT, RAISE
+ //`--------------------' `--------------------'
+ )
+};
+
+int RGB_current_mode;
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+ if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+ layer_on(layer3);
+ } else {
+ layer_off(layer3);
+ }
+}
+
+void matrix_init_user(void) {
+ #ifdef RGBLIGHT_ENABLE
+ RGB_current_mode = rgblight_config.mode;
+ #endif
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ report_mouse_t currentReport = {};
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case RGB_MOD:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ rgblight_mode(RGB_current_mode);
+ rgblight_step();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ return false;
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_mode = rgblight_config.mode;
+ }
+ #endif
+ break;
+ case MBTN1:
+ currentReport = pointing_device_get_report();
+ if (record->event.pressed) {
+ currentReport.buttons |= MOUSE_BTN1;
+ }
+ else {
+ currentReport.buttons &= ~MOUSE_BTN1;
+ }
+ pointing_device_set_report(currentReport);
+ pointing_device_send();
+ return false;
+ case SCRL:
+ if (record->event.pressed) {
+ isScrollMode = true;
+ }
+ else {
+ isScrollMode = false;
+ }
+ return false;
+ }
+ return true;
+}
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md b/keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md
new file mode 100644
index 0000000000..cd511018c1
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/readme.md
@@ -0,0 +1,14 @@
+# CrKbd with the Trackpad support
+
+CrKbd version that supports BlackBerry 8520 trackpad via additional PCB.
+See this repository for more details:
+ - https://github.com/vlukash/corne-trackpad
+ - https://vlukash.com/2019/01/15/trackpad-in-keycap-corne-crkbd-keyboard
+
+This firmware is for the Right keyboard.
+
+# Build
+
+```
+make crkbd:vlukash_trackpad_right:dfu
+```
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk b/keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk
new file mode 100644
index 0000000000..bd53c19211
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/rules.mk
@@ -0,0 +1,10 @@
+# Build Options
+POINTING_DEVICE_ENABLE = yes # Generic Pointer, not as big as mouse keys hopefully.
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
+
+BOOTLOADER = atmel-dfu
+
+# Add support for the BB 8520 trackpad
+SRC += trackpad.c
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c
new file mode 100644
index 0000000000..afccb8c7ed
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.c
@@ -0,0 +1,78 @@
+#include "trackpad.h"
+
+// bool isScrollingMode = false;
+bool isScrollMode = false;
+
+void pointing_device_init(void){
+
+ SPI_Init(SPI_SPEED_FCPU_DIV_8 | SPI_MODE_MASTER);
+
+ // Set as output
+ TP_RESET_INIT;
+ TP_SHUTDOWN_INIT;
+ TP_CS_INIT;
+ LVL_SHIFT_EN_INIT;
+
+ // Reset level shifter
+ LVL_SHIFT_EN_LO;
+ wait_ms(100);
+ LVL_SHIFT_EN_HI;
+
+ // Force a BB-8520 reset
+ TP_RESET_HI;
+ wait_ms(100);
+ TP_RESET_LO;
+
+ // Turn on BB-8520 trackpad
+ TP_SHUTDOWN_LO;
+
+ TP_CS_HI;
+}
+
+uint8_t readRegister(uint8_t address) {
+ uint8_t data;
+
+ TP_CS_LO;
+
+ // Read the data
+ SPI_TransferByte(address);
+ data = SPI_TransferByte(0x00);
+
+ TP_CS_HI;
+
+ return data;
+}
+
+void pointing_device_task(void){
+ uint8_t motion = readRegister(0x02);
+
+ // Motion has occurred on the trackpad
+ if (motion > 127) {
+
+ int8_t dx, dy;
+
+ if(TRACKPAD_CONNECTOR_VER == 1) {
+ dx = readRegister(0x03);
+ dy = -readRegister(0x04);
+ }
+ else {
+ dy = -readRegister(0x03);
+ dx = -readRegister(0x04);
+ }
+
+ report_mouse_t currentReport = pointing_device_get_report();
+ if (isScrollMode)
+ {
+ currentReport.h = dx/SCROLL_SPEED_DIVIDER;
+ currentReport.v = dy/SCROLL_SPEED_DIVIDER;
+ }
+ else
+ {
+ currentReport.x = dx * POINTER_SPEED_MULTIPLIER;
+ currentReport.y = dy * POINTER_SPEED_MULTIPLIER;
+ }
+
+ pointing_device_set_report(currentReport);
+ pointing_device_send();
+ }
+}
diff --git a/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h
new file mode 100644
index 0000000000..755abc7de2
--- /dev/null
+++ b/keyboards/crkbd/keymaps/vlukash_trackpad_right/trackpad.h
@@ -0,0 +1,32 @@
+#pragma once
+
+#include "pointing_device.h"
+#include "quantum.h"
+#include "report.h"
+#include <util/delay.h>
+#include "../../lib/lufa/LUFA/Drivers/Peripheral/SPI.h"
+
+// Trackpad speed adjustments
+#define POINTER_SPEED_MULTIPLIER 2
+#define SCROLL_SPEED_DIVIDER 6
+
+// Pins on corresponding ports
+#define TP_RESET 1
+#define TP_SHUTDOWN 0
+#define TP_CS 0
+#define LVL_SHIFT_EN 7
+
+// Configure as output
+#define TP_RESET_INIT DDRF |= (1 << TP_RESET);
+#define TP_SHUTDOWN_INIT DDRF |= (1 << TP_SHUTDOWN);
+#define TP_CS_INIT DDRB |= (1 << TP_CS);
+#define LVL_SHIFT_EN_INIT DDRC |= (1 << LVL_SHIFT_EN);
+
+#define TP_RESET_HI PORTF |= (1 << TP_RESET);
+#define TP_RESET_LO PORTF &= ~ (1 << TP_RESET);
+#define TP_SHUTDOWN_HI PORTF |= (1 << TP_SHUTDOWN);
+#define TP_SHUTDOWN_LO PORTF &= ~ (1 << TP_SHUTDOWN);
+#define TP_CS_HI PORTB |= (1 << TP_CS);
+#define TP_CS_LO PORTB &= ~ (1 << TP_CS);
+#define LVL_SHIFT_EN_HI PORTC |= (1 << LVL_SHIFT_EN);
+#define LVL_SHIFT_EN_LO PORTC &= ~ (1 << LVL_SHIFT_EN);
diff --git a/keyboards/crkbd/rev1/matrix.c b/keyboards/crkbd/rev1/matrix.c
index 718cc57448..dd93506db1 100644
--- a/keyboards/crkbd/rev1/matrix.c
+++ b/keyboards/crkbd/rev1/matrix.c
@@ -93,6 +93,44 @@ uint8_t matrix_cols(void)
return MATRIX_COLS;
}
+void tx_rx_leds_init(void)
+{
+#ifndef NO_DEBUG_LEDS
+ TX_RX_LED_INIT;
+ TXLED0;
+ RXLED0;
+#endif
+}
+
+void tx_led_on(void)
+{
+#ifndef NO_DEBUG_LEDS
+ TXLED1;
+#endif
+}
+
+void tx_led_off(void)
+{
+#ifndef NO_DEBUG_LEDS
+ TXLED0;
+#endif
+}
+
+void rx_led_on(void)
+{
+#ifndef NO_DEBUG_LEDS
+ RXLED1;
+#endif
+}
+
+void rx_led_off(void)
+{
+#ifndef NO_DEBUG_LEDS
+ RXLED0;
+#endif
+}
+
+
void matrix_init(void)
{
debug_enable = true;
@@ -102,9 +140,7 @@ void matrix_init(void)
unselect_rows();
init_cols();
- TX_RX_LED_INIT;
- TXLED0;
- RXLED0;
+ tx_rx_leds_init();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -189,10 +225,10 @@ int serial_transaction(int master_changed) {
int ret=serial_update_buffers();
#endif
if (ret ) {
- if(ret==2) RXLED1;
+ if(ret==2) rx_led_on();
return 1;
}
- RXLED0;
+ rx_led_off();
memcpy(&matrix[slaveOffset],
(void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH);
return 0;
@@ -241,7 +277,7 @@ uint8_t matrix_master_scan(void) {
if( serial_transaction(mchanged) ) {
#endif
// turn on the indicator led when halves are disconnected
- TXLED1;
+ tx_led_on();
error_count++;
@@ -254,7 +290,7 @@ uint8_t matrix_master_scan(void) {
}
} else {
// turn off the indicator led on no error
- TXLED0;
+ tx_led_off();
error_count = 0;
}
matrix_scan_quantum();