diff options
Diffstat (limited to 'keyboards')
27 files changed, 799 insertions, 0 deletions
diff --git a/keyboards/sawnsprojects/amber80/readme.md b/keyboards/sawnsprojects/amber80/readme.md new file mode 100644 index 0000000000..bc5dd417fc --- /dev/null +++ b/keyboards/sawnsprojects/amber80/readme.md @@ -0,0 +1,25 @@ +# Amber80 solder + +A TKL keyboard sold in several variants. + +1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Amber80 +* Hardware Availability: Comming Soon + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/amber80/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/config.h b/keyboards/sawnsprojects/amber80/solder/config.h new file mode 100644 index 0000000000..90c9bc522c --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/config.h @@ -0,0 +1,72 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0xA801 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SawnsProjects X Yuutsu X Zlane +#define PRODUCT Amber80 Solder + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* Indicator */ +#define LED_CAPS_LOCK_PIN F5 +#define LED_SCROLL_LOCK_PIN B0 +#define LED_PIN_ON_STATE 0 +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B1, B2, B3, B7, D0, D1, F1, F0, D7, B4, D5, D3 } +#define MATRIX_COL_PINS { F4, F6, F7, C7, C6, B6, B5, D6, D4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* RGB */ +#define RGB_DI_PIN D2 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 22 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== or choose animations ==*/ + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST + #define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/sawnsprojects/amber80/solder/info.json b/keyboards/sawnsprojects/amber80/solder/info.json new file mode 100644 index 0000000000..49ca20594c --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/info.json @@ -0,0 +1,101 @@ +{ + "keyboard_name": "Amber80 SOLDER", + "url": "", + "maintainer": "SawnsProjects", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "K00 (B1,F4)", "x": 0, "y": 0 }, + { "label": "K10 (B2,F4)", "x": 1.25, "y": 0 }, + { "label": "K01 (B1,F6)", "x": 2.25, "y": 0 }, + { "label": "K11 (B2,F6)", "x": 3.25, "y": 0 }, + { "label": "K02 (B1,F7)", "x": 4.25, "y": 0 }, + { "label": "K12 (B2,F7)", "x": 5.5, "y": 0 }, + { "label": "K03 (B1,C7)", "x": 6.5, "y": 0 }, + { "label": "K13 (B2,C7)", "x": 7.5, "y": 0 }, + { "label": "K04 (B1,C6)", "x": 8.5, "y": 0 }, + { "label": "K14 (B2,C6)", "x": 9.75, "y": 0 }, + { "label": "K05 (B1,B6)", "x": 10.75, "y": 0 }, + { "label": "K15 (B2,B6)", "x": 11.75, "y": 0 }, + { "label": "K06 (B1,B5)", "x": 12.75, "y": 0 }, + { "label": "K16 (B2,B5)", "x": 14, "y": 0 }, + { "label": "K17 (B2,D6)", "x": 15.25, "y": 0 }, + { "label": "K08 (B1,D4)", "x": 16.25, "y": 0 }, + { "label": "K18 (B2,D4)", "x": 17.25, "y": 0 }, + { "label": "K20 (B3,F4)", "x": 0, "y": 1.25 }, + { "label": "K30 (B7,F4)", "x": 1, "y": 1.25 }, + { "label": "K21 (B3,F6)", "x": 2, "y": 1.25 }, + { "label": "K31 (B7,F6)", "x": 3, "y": 1.25 }, + { "label": "K22 (B3,F7)", "x": 4, "y": 1.25 }, + { "label": "K32 (B7,F7)", "x": 5, "y": 1.25 }, + { "label": "K23 (B3,C7)", "x": 6, "y": 1.25 }, + { "label": "K33 (B7,C7)", "x": 7, "y": 1.25 }, + { "label": "K24 (B3,C6)", "x": 8, "y": 1.25 }, + { "label": "K34 (B7,C6)", "x": 9, "y": 1.25 }, + { "label": "K25 (B3,B6)", "x": 10, "y": 1.25 }, + { "label": "K35 (B7,B6)", "x": 11, "y": 1.25 }, + { "label": "K26 (B3,B5)", "x": 12, "y": 1.25 }, + { "label": "K36 (B7,B5)", "x": 13, "y": 1.25 }, + { "label": "K27 (B3,D6)", "x": 14, "y": 1.25 }, + { "label": "K37 (B7,D6)", "x": 15.25, "y": 1.25 }, + { "label": "K28 (B3,D4)", "x": 16.25, "y": 1.25 }, + { "label": "K38 (B7,D4)", "x": 17.25, "y": 1.25 }, + { "label": "K40 (D0,F4)", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "K50 (D1,F4)", "x": 1.5, "y": 2.25 }, + { "label": "K41 (D0,F6)", "x": 2.5, "y": 2.25 }, + { "label": "K51 (D1,F6)", "x": 3.5, "y": 2.25 }, + { "label": "K42 (D0,F7)", "x": 4.5, "y": 2.25 }, + { "label": "K52 (D1,F7)", "x": 5.5, "y": 2.25 }, + { "label": "K43 (D0,C7)", "x": 6.5, "y": 2.25 }, + { "label": "K53 (D1,C7)", "x": 7.5, "y": 2.25 }, + { "label": "K44 (D0,C6)", "x": 8.5, "y": 2.25 }, + { "label": "K54 (D1,C6)", "x": 9.5, "y": 2.25 }, + { "label": "K45 (D0,B6)", "x": 10.5, "y": 2.25 }, + { "label": "K55 (D1,B6)", "x": 11.5, "y": 2.25 }, + { "label": "K46 (D0,B5)", "x": 12.5, "y": 2.25 }, + { "label": "K56 (D1,B5)", "x": 13.5, "y": 2.25, "w": 1.5 }, + { "label": "K57 (D1,D6)", "x": 15.25, "y": 2.25 }, + { "label": "K48 (D0,D4)", "x": 16.25, "y": 2.25 }, + { "label": "K58 (D1,D4)", "x": 17.25, "y": 2.25 }, + { "label": "K60 (F1,F4)", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "K70 (F0,F4)", "x": 1.75, "y": 3.25 }, + { "label": "K61 (F1,F6)", "x": 2.75, "y": 3.25 }, + { "label": "K71 (F0,F6)", "x": 3.75, "y": 3.25 }, + { "label": "K62 (F1,F7)", "x": 4.75, "y": 3.25 }, + { "label": "K72 (F0,F7)", "x": 5.75, "y": 3.25 }, + { "label": "K63 (F1,C7)", "x": 6.75, "y": 3.25 }, + { "label": "K73 (F0,C7)", "x": 7.75, "y": 3.25 }, + { "label": "K64 (F1,C6)", "x": 8.75, "y": 3.25 }, + { "label": "K74 (F0,C6)", "x": 9.75, "y": 3.25 }, + { "label": "K65 (F1,B6)", "x": 10.75, "y": 3.25 }, + { "label": "K75 (F0,B6)", "x": 11.75, "y": 3.25 }, + { "label": "K76 (F0,B5)", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "K80 (D7,F4)", "x": 0, "y": 4.25, "w": 1.25 }, + { "label": "K90 (B4,F4)", "x": 1.25, "y": 4.25 }, + { "label": "K81 (D7,F6)", "x": 2.25, "y": 4.25 }, + { "label": "K91 (B4,F6)", "x": 3.25, "y": 4.25 }, + { "label": "K82 (D7,F7)", "x": 4.25, "y": 4.25 }, + { "label": "K92 (B4,F7)", "x": 5.25, "y": 4.25 }, + { "label": "K83 (D7,C7)", "x": 6.25, "y": 4.25 }, + { "label": "K93 (B4,C7)", "x": 7.25, "y": 4.25 }, + { "label": "K84 (D7,C6)", "x": 8.25, "y": 4.25 }, + { "label": "K94 (B4,C6)", "x": 9.25, "y": 4.25 }, + { "label": "K85 (D7,B6)", "x": 10.25, "y": 4.25 }, + { "label": "K95 (B4,B6)", "x": 11.25, "y": 4.25 }, + { "label": "K86 (D7,B5)", "x": 12.25, "y": 4.25, "w": 1.75 }, + { "label": "K96 (B4,B5)", "x": 14, "y": 4.25 }, + { "label": "K88 (D7,D4)", "x": 16.25, "y": 4.25 }, + { "label": "KA0 (D5,F4)", "x": 0, "y": 5.25, "w": 1.5 }, + { "label": "KB0 (D3,F4)", "x": 1.5, "y": 5.25 }, + { "label": "KA1 (D5,F6)", "x": 2.5, "y": 5.25, "w": 1.5 }, + { "label": "KB3 (D3,C7)", "x": 4, "y": 5.25, "w": 7 }, + { "label": "KA6 (D5,B5)", "x": 11, "y": 5.25, "w": 1.5 }, + { "label": "KB6 (D3,B5)", "x": 12.5, "y": 5.25 }, + { "label": "KA7 (D5,D6)", "x": 13.5, "y": 5.25, "w": 1.5 }, + { "label": "KB7 (D3,D6)", "x": 15.25, "y": 5.25 }, + { "label": "KA8 (D5,D4)", "x": 16.25, "y": 5.25 }, + { "label": "KB8 (D3,D4)", "x": 17.25, "y": 5.25 } + ] + } + } +} diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..ffc9beb772 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c @@ -0,0 +1,30 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ) +};
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..60f00eb4ba --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Amber80 Solder
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..b8e8084374 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c @@ -0,0 +1,54 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +};
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/amber80/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..3313fcc41a --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for Amber80 Solder
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..43061db1dd --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/readme.md b/keyboards/sawnsprojects/amber80/solder/readme.md new file mode 100644 index 0000000000..a429328702 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/readme.md @@ -0,0 +1,24 @@ +# Amber80 solder + +![Amber80](https://i.imgur.com/ygUgpqZh.jpg) + +A TKL keyboard sold in several variants. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Amber80 +* Hardware Availability: Comming Soon + +Make example for this keyboard (after setting up your build environment): + + make sawnsprojects/amber80/solder:default + + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sawnsprojects/amber80/solder/rules.mk b/keyboards/sawnsprojects/amber80/solder/rules.mk new file mode 100644 index 0000000000..4613b7d460 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output
\ No newline at end of file diff --git a/keyboards/sawnsprojects/amber80/solder/solder.c b/keyboards/sawnsprojects/amber80/solder/solder.c new file mode 100644 index 0000000000..b7dbe1e558 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/solder.c @@ -0,0 +1,17 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h" diff --git a/keyboards/sawnsprojects/amber80/solder/solder.h b/keyboards/sawnsprojects/amber80/solder/solder.h new file mode 100644 index 0000000000..9f76795162 --- /dev/null +++ b/keyboards/sawnsprojects/amber80/solder/solder.h @@ -0,0 +1,44 @@ +/* Copyright 2022 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +#define LAYOUT_all( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K17, K08, K18, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, K38, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K57, K48, K58, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76, \ + K80, K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K96, K88, \ + KA0, KB0, KA1, KB3, KA6, KB6, KA7, KB7, KA8, KB8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX, K08 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, K43, K44, K45, K46, XXX, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, K63, K64, K65, XXX, XXX, XXX }, \ + { K70, K71, K72, K73, K74, K75, K76, XXX, XXX }, \ + { K80, K81, K82, K83, K84, K85, K86, XXX, K88 }, \ + { K90, K91, K92, K93, K94, K95, K96, XXX, XXX }, \ + { KA0, KA1, XXX, XXX, XXX, XXX, KA6, KA7, KA8 }, \ + { KB0, XXX, XXX, KB3, XXX, XXX, KB6, KB7, KB8 }, \ +} + diff --git a/keyboards/sawnsprojects/vcl65/readme.md b/keyboards/sawnsprojects/vcl65/readme.md new file mode 100644 index 0000000000..025c41badf --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/readme.md @@ -0,0 +1,25 @@ +# VCL65 solder + +A 65% keyboard sold in several variants. + +1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "VCL65" with Lotus 65 lite keyboard case. Compatible with some 65% traymount case, VCL65 and Lotus65. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) & [Hoaq](https://github.com/itsmehoaq) +* Hardware Supported: Lotus65 lite, VCL65, 65% traymount case +* Hardware Availability: Private Discord GB + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/vcl65/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/config.h b/keyboards/sawnsprojects/vcl65/solder/config.h new file mode 100644 index 0000000000..bf1a7cdde6 --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/config.h @@ -0,0 +1,66 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0x1727 +#define DEVICE_VER 0x0001 +#define MANUFACTURER VCL x SawnsProjects +#define PRODUCT VCL65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F6, F7, F0, F4, B1 } +#define MATRIX_COL_PINS { B2, B5, F5, C7, B4, C6, D7, D6, D4, D5, D3, D2, B6, D1, D0 } +#define UNUSED_PINS + +/* indicator */ +// #define LED_CAPS_LOCK_PIN F0 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW +/* Caps Lock */ +#define LED_CAPS_LOCK_PIN F1 +#define LED_PIN_ON_STATE 0 +/* rotary */ + +#define RGB_DI_PIN B7 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif
\ No newline at end of file diff --git a/keyboards/sawnsprojects/vcl65/solder/info.json b/keyboards/sawnsprojects/vcl65/solder/info.json new file mode 100644 index 0000000000..bae3093b4f --- /dev/null +++ b/keyboards/sawnsprojects/vcl65/solder/info.json @@ -0,0 +1,81 @@ +{ + "keyboard_name": "VCL65 Solder", + "url": "", + "maintainer": "MaiTheSan", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "K00 (F6,B2)", "x": 0, "y": 0 }, + { "label": "K01 (F6,B5)", "x": 1, "y": 0 }, + { "label": "K02 (F6,F5)", "x": 2, "y": 0 }, + { "label": "K03 (F6,C7)", "x": 3, "y": 0 }, + { "label": "K04 (F6,B4)", "x": 4, "y": 0 }, + { "label": "K05 (F6,C6)", "x": 5, "y": 0 }, + { "label": "K06 (F6,D7)", "x": 6, "y": 0 }, + { "label": "K07 (F6,D6)", "x": 7, "y": 0 }, + { "label": "K08 (F6,D4)", "x": 8, "y": 0 }, + { "label": "K09 (F6,D5)", "x": 9, "y": 0 }, + { "label": "K0A (F6,D3)", "x": 10, "y": 0 }, + { "label": "K0B (F6,D2)", "x": 11, "y": 0 }, + { "label": "K0C (F6,B6)", "x": 12, "y": 0 }, + { "label": "K0D (F6,D1)", "x": 13, "y": 0 }, + { "label": "K2C (F4,B6)", "x": 14, "y": 0 }, + { "label": "K0E (F6,D0)", "x": 15, "y": 0 }, + { "label": "K10 (F7,B2)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K11 (F7,B5)", "x": 1.5, "y": 1 }, + { "label": "K12 (F7,F5)", "x": 2.5, "y": 1 }, + { "label": "K13 (F7,C7)", "x": 3.5, "y": 1 }, + { "label": "K14 (F7,B4)", "x": 4.5, "y": 1 }, + { "label": "K15 (F7,C6)", "x": 5.5, "y": 1 }, + { "label": "K16 (F7,D7)", "x": 6.5, "y": 1 }, + { "label": "K17 (F7,D6)", "x": 7.5, "y": 1 }, + { "label": "K18 (F7,D4)", "x": 8.5, "y": 1 }, + { "label": "K19 (F7,D5)", "x": 9.5, "y": 1 }, + { "label": "K1A (F7,D3)", "x": 10.5, "y": 1 }, + { "label": "K1B (F7,D2)", "x": 11.5, "y": 1 }, + { "label": "K1C (F7,B6)", "x": 12.5, "y": 1 }, + { "label": "K1D (F7,D1)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K1E (F7,D0)", "x": 15, "y": 1 }, + { "label": "K20 (F4,B2)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K21 (F4,B5)", "x": 1.75, "y": 2 }, + { "label": "K22 (F4,F5)", "x": 2.75, "y": 2 }, + { "label": "K23 (F4,C7)", "x": 3.75, "y": 2 }, + { "label": "K24 (F4,B4)", "x": 4.75, "y": 2 }, + { "label": "K25 (F4,C6)", "x": 5.75, "y": 2 }, + { "label": "K26 (F4,D7)", "x": 6.75, "y": 2 }, + { "label": "K27 (F4,D6)", "x": 7.75, "y": 2 }, + { "label": "K28 (F4,D4)", "x": 8.75, "y": 2 }, + { "label": "K29 (F4,D5)", "x": 9.75, "y": 2 }, + { "label": "K2A (F4,D3)", "x": 10.75, "y": 2 }, + { "label": "K2B (F4,D2)", "x": 11.75, "y": 2 }, + { "label": "K2D (F4,D1)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K2E (F4,D0)", "x": 15, "y": 2 }, + { "label": "K30 (B0,B2)", "x": 0, "y": 3, "w": 1.25 }, + { "label": "K31 (B0,B5)", "x": 1.25, "y": |