diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/s60-x/Makefile | 2 | ||||
| -rw-r--r-- | keyboards/s60-x/config.h | 120 | ||||
| -rw-r--r-- | keyboards/s60-x/default/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/s60-x/default/config.h | 25 | ||||
| -rw-r--r-- | keyboards/s60-x/default/default.c | 28 | ||||
| -rw-r--r-- | keyboards/s60-x/default/default.h | 69 | ||||
| -rw-r--r-- | keyboards/s60-x/default/rules.mk | 1 | ||||
| -rw-r--r-- | keyboards/s60-x/keymaps/dbroqua/keymap.c | 194 | ||||
| -rw-r--r-- | keyboards/s60-x/rgb/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/s60-x/rgb/config.h | 31 | ||||
| -rw-r--r-- | keyboards/s60-x/rgb/rgb.c | 1 | ||||
| -rw-r--r-- | keyboards/s60-x/rgb/rgb.h | 37 | ||||
| -rw-r--r-- | keyboards/s60-x/rgb/rules.mk | 56 | ||||
| -rw-r--r-- | keyboards/s60-x/s60-x.c | 29 | ||||
| -rw-r--r-- | keyboards/s60-x/s60-x.h | 68 |
15 files changed, 458 insertions, 209 deletions
diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile index 4e2a6f00fd..879e493a21 100644 --- a/keyboards/s60-x/Makefile +++ b/keyboards/s60-x/Makefile @@ -1,3 +1,5 @@ +SUBPROJECT_DEFAULT = default + ifndef MAKEFILE_INCLUDED include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h index ac7951c247..8e7bc78be2 100644 --- a/keyboards/s60-x/config.h +++ b/keyboards/s60-x/config.h @@ -27,138 +27,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 #define MANUFACTURER Massdrop -#define PRODUCT S60-X -#define DESCRIPTION q.m.k. keyboard firmware for S60-X /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 15 -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 } -#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 } -#define UNUSED_PINS { F0 } - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ +/* key combination for command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -#define NO_ACTION_ONESHOT -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION - #endif diff --git a/keyboards/s60-x/default/Makefile b/keyboards/s60-x/default/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/s60-x/default/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/s60-x/default/config.h b/keyboards/s60-x/default/config.h new file mode 100644 index 0000000000..436c6fa8b6 --- /dev/null +++ b/keyboards/s60-x/default/config.h @@ -0,0 +1,25 @@ +#ifndef DEFAULT_CONFIG_H +#define DEFAULT_CONFIG_H + +#include "../config.h" + +#define PRODUCT S60-X +#define DESCRIPTION q.m.k. keyboard firmware for S60-X + +#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 } +#define UNUSED_PINS { F0 } + +#define LOCKING_SUPPORT_ENABLE +#define LOCKING_RESYNC_ENABLE + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/s60-x/default/default.c b/keyboards/s60-x/default/default.c new file mode 100644 index 0000000000..253f5495c2 --- /dev/null +++ b/keyboards/s60-x/default/default.c @@ -0,0 +1,28 @@ +#include "default.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/s60-x/default/default.h b/keyboards/s60-x/default/default.h new file mode 100644 index 0000000000..86233ef7e0 --- /dev/null +++ b/keyboards/s60-x/default/default.h @@ -0,0 +1,69 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> +Copyright 2015 Vin�cius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com> +Copyright 2016 Felix Uhl <ifreilicht@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef DEFAULT_H +#define DEFAULT_H + +#include "quantum.h" + +#ifdef __INTELLISENSE__ +#define PROGMEM +#include "../config.h" +#endif + +/* S60-X keymap definition macro +* K31 is the extra key next to short left ISO shift +* K2C is the moved key next to enter on ISO boards +* K3C is the extra key next to short right JIS shift +* K0D is extra key from split backspace +* K3E is extra key from HHKB-style split right shift +*/ + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO } \ +} + +/*This special definition is used for S60-X keymaps that were ported from TMK + * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended + */ +#define LEGACY_KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/s60-x/default/rules.mk b/keyboards/s60-x/default/rules.mk new file mode 100644 index 0000000000..b8ff762607 --- /dev/null +++ b/keyboards/s60-x/default/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE ?= no
\ No newline at end of file diff --git a/keyboards/s60-x/keymaps/dbroqua/keymap.c b/keyboards/s60-x/keymaps/dbroqua/keymap.c new file mode 100644 index 0000000000..940119e52f --- /dev/null +++ b/keyboards/s60-x/keymaps/dbroqua/keymap.c @@ -0,0 +1,194 @@ +#include "s60-x.h" + +#define _DEFAULT 0 +#define _FN 1 +#define _SFX 2 + +// Fillers to make layering more clear +#define ______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty gui/alt/space/alt/gui + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | + * |-----------------------------------------------------------------------------------------+ + * |LGUI | LAlt | Space | RAlt |RGUI | + * `-----------------------------------------------------------------' + */ + [_DEFAULT] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, ______, KC_ENT, \ + KC_LSFT, ______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, ______, KC_RSFT, MO(_FN), \ + ______, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, ______, ______ \ + ), + +/* FN Layer + * ,-----------------------------------------------------------------------------------------. + * | SFX | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | + * |-----------------------------------------------------------------------------------------+ + * | | | | Stop | | + * `-----------------------------------------------------------------' + */ + [_FN] = KEYMAP( /* Layer 1 */ + TG(_SFX),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ + ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, ______, \ + ______, ______, KC_MPRV, KC_MPLY, KC_MNXT,______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN,______, ______, ______, \ + ______, ______, ______, ______, KC_MSTP, ______, ______, ______ \ + ), + + +/* SFX Layer + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | BL- | BL+ | BL | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | RGBT| RGBM| | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | Hue+| Hue-| Sat+| Sat-| Val+| Val-| | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | + * `-----------------------------------------------------------------' + */ + [_SFX] = KEYMAP( + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, F(0), F(1), ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, F(2), F(3), F(4), F(5), F(6), F(7), ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______ \ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + keyevent_t event = record->event; + + switch (id) { + + } + return MACRO_NONE; +} + +enum function_id { + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(RGBLED_TOGGLE), + [1] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL) +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + } +} + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +}
\ No newline at end of file diff --git a/keyboards/s60-x/rgb/Makefile b/keyboards/s60-x/rgb/Makefile new file mode 100644 index 0000000000..bd09e5885d --- /dev/null +++ b/keyboards/s60-x/rgb/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif diff --git a/keyboards/s60-x/rgb/config.h b/keyboards/s60-x/rgb/config.h new file mode 100644 index 0000000000..26b246e573 --- /dev/null +++ b/keyboards/s60-x/rgb/config.h @@ -0,0 +1,31 @@ +#ifndef RBG_CONFIG_H +#define RBG_CONFIG_H + +#include "../config.h" + +#define PRODUCT S60-X-RGB +#define DESCRIPTION q.m.k. keyboard firmware for S60-X RGB + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 } + +/* number of backlight levels */ +#define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + +#define RGB_DI_PIN F6 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 10 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif
\ No newline at end of file diff --git a/keyboards/s60-x/rgb/rgb.c b/keyboards/s60-x/rgb/rgb.c new file mode 100644 index 0000000000..0117e14ae5 --- /dev/null +++ b/keyboards/s60-x/rgb/rgb.c @@ -0,0 +1 @@ +#include "rgb.h" diff --git a/keyboards/s60-x/rgb/rgb.h b/keyboards/s60-x/rgb/rgb.h new file mode 100644 index 0000000000..cb7a5f567f --- /dev/null +++ b/keyboards/s60-x/rgb/rgb.h @@ -0,0 +1,37 @@ +#ifndef S60XRGB_H +#define S60XRGB_H + +#include "quantum.h" + +#define KEYMAP( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ + K400, K401, K402, K406, K410, K411, K412, K413 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, KC_NO } \ +} + +/*This special definition is used for S60-X keymaps that were ported from TMK + * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended + */ +#define LEGACY_KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/s60-x/rgb/rules.mk b/keyboards/s60-x/rgb/rules.mk new file mode 100644 index 0000000000..c303af4bcc --- /dev/null +++ b/keyboards/s60-x/rgb/rules.mk @@ -0,0 +1,56 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +AUDIO_ENABLE ?= no +RGBLIGHT_ENABLE ?= yes
\ No newline at end of file diff --git a/keyboards/s60-x/s60-x.c b/keyboards/s60-x/s60-x.c index 417358140c..f031dd770d 100644 --- a/keyboards/s60-x/s60-x.c +++ b/keyboards/s60-x/s60-x.c @@ -1,28 +1 @@ -#include "s60-x.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} +#include "s60-x.h"
\ No newline at end of file diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h index 29a2a27b22..5bf8cfcefa 100644 --- a/keyboards/s60-x/s60-x.h +++ b/keyboards/s60-x/s60-x.h @@ -1,69 +1,13 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> -Copyright 2015 Vinícius Nery Cordeiro <vinicius.nery.cordeiro@gmail.com> -Copyright 2016 Felix Uhl <ifreilicht@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - #ifndef S60X_H #define S60X_H -#include "quantum.h" - -#ifdef __INTELLISENSE__ -#define PROGMEM -#include "config.h" +#ifdef SUBPROJECT_default + #include "default.h" +#endif +#ifdef SUBPROJECT_rgb + #include "rgb.h" #endif -/* S60-X keymap definition macro -* K31 is the extra key next to short left ISO shift -* K2C is the moved key next to enter on ISO boards -* K3C is the extra key next to short right JIS shift -* K0D is extra key from split backspace -* K3E is extra key from HHKB-style split right shift -*/ - -#define KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO } \ -} - -/*This special definition is used for S60-X keymaps that were ported from TMK - * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended - */ -#define LEGACY_KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO } \ -} +#include "quantum.h" #endif |